1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | CA Glue fast 20g |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Gear for MICRO BB |
2 x | 1/10 Pilot "Jack" |
2 x | Cooler motor type 280 |
1 x | Windsock Ozone L - 700 mm |
1 x | Paramotor Kit Camo H1.5/ Ben Red |
1 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Smoke set "Glider" |
1 x | Servo AN-20 MGBBA |
1 x | Servo GO-02 Digital 1.8g |
2 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Cable Cargador FUTABA |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | USB programador GO servos |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
1 x | AX-60 starters (5 pcs) |
1 x | Threaded coupler M3 (10 uds) |
1 x | Red smoke canister 100 g |
1 x | Servo FUTABA BLS 276SV |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Optotronix Aurora Plug |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Servo HITEC HS-325 BB |
1 x | Glases Ace |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | XH female balance (5S) connector (2 pcs) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
2 x | Ventus 1:4 set of instruments |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | 10m servo "Premium" wire (white/red/blue) |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Servo HITEC HS-5084 MG |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Servo SAVOX SB-2290 SG |
1 x | Cut tube |
1 x | 1/12 Pilot "Cougar" |
1 x | Piloto JET 1:3,5 |
2 x | Adapter lead MPX/XT60 |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Starter EM Gear Power 250 |
1 x | 1/12 Pilot "Tom" |
2 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Savox Brushless Servo SC-1251 MG |
1 x | Screwdriver for Torx® TX8 |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
2 x | Cabel charger transmitter GRAUPNER |
1 x | Pilot "Goose" (Slimline) |
1 x | SAVOX SH 0254 servo |
1 x | 1/12 Pilot "Fighter" |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
2 x | USB Mini Camera endoscope |
1 x | Hot Glue Stick GREEN |
2 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
2 x | Cooler motor type 150 |
1 x | Propeller POWER-PROP 15x10 |
1 x | 10x7 tree blades propeller |
1 x | Propeller MASTER 7x5 |
1 x | Propeller MASTER 6x3,5 |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Gear set HITEC HS205/225MG/5245MG/7245MH |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | Servo MKS HV1220 |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Servo MKS HV6130 |
1 x | Servo MKS 6100 DS |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Sandpaper file 13 mm |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Mini Lock Grips 2PCS |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | CC 03 |
1 x | Gates hinge |
1 x | Dremel 3000 130W |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | CC 01 |
1 x | Llave dinamomterica 74 Z 0 0 21 |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Heli blades angle measurer |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Refueling Cap V3 Black |
2 x | Motor holder for AC 28/7 |
1 x | Indoor Brushed motor kit |
1 x | Cooler motor type 300 |
1 x | Cooler motor type 400 |
1 x | |
1 x | Propeller POWER-PROP 14x8 |
1 x | Propeller POWER-PROP 14x10 |
1 x | Propeller MASTER 5,5x4 |
1 x | 15x7 tree blades propeller |
1 x | Propeller POWER-PROP 12x8 |
1 x | Propeller POWER-PROP 11x8 |
1 x | Propeller MASTER AIRSCREW 12x8 |
1 x | Helice CLASSIC-Prop 20x10 |
1 x | 6x4 tree blades propeller |
1 x | MASTER 16x10 tree blades propeller |
1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
1 x | Propeller MASTER 7x6 |
1 x | 9x7 tree blades propeller |
1 x | Propeller MASTER AIRSCREW 9x6 |
1 x | Propeller POWER-PROP 11x6 |
1 x | Propeller MASTER 6x4 |
1 x | 12x6 tree blades propeller |
1 x | Propeller POWER-PROP 16x8 |
1 x | Propeller MASTER AIRSCREW 9x6 |
1 x | 12x8 tree blades propeller |
1 x | Propeller POWER-PROP 16x10 |
1 x | Propeller MASTER 7x3 |
1 x | Propeller POWER-PROP 12x6 |
1 x | EDF Stream-Fan 110mm kv780 |
1 x | Inlet lip (carbon) Stream-Fan 110 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Servo Metal Horn 15.5 mm MKS |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Servo MKS HBL599 SL |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | Straightened threaded rod M3 - 1m |
1 x | Brazo servo MKS Metal M3-L:30 (2 pcs) |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | 90x75 mm standart servo cover |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | 30 cm BEC cable (male) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 1/4 Pilot "Heidi" |
1 x | 18 mm reinforced hinge |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Savox Brushless Servo SC-1267 SG |
1 x | BEC 3A FOXY |
1 x | PROXXON - SAW BLADE HSS (50MM - 100T) (28020) |
1 x | JETImodel SINGLE BEC |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Long pinned hinge (6 uds) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | 30 cm BEC cable (female) |
1 x | 15 mm reinforced hinge |
1 x | Adapter lead MPX/EC3 |
1 x | Servo TOPMODEL S7520 MG |
|
8,468.39EUR |