Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock	Opto Gas Engine Kill Switch temporarily out of stock	Propeller MENZ-S 17x10 temporarily out of stock
Propeller MENZ-S 18x12 temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	XT-90 connector (pair) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Beaver DHC-2 DeHavilland 3000mm White/Black CYMODEL
975.02EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Extinguisher CO2 - 2 Kg
1 x	Crimping tool
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Copier 2x20 cm pcs
2 x
2 x	Copier 5x20 cm pcs
1 x	Crimping tool
1 x	Hot Glue Stick BLACK
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Disposable Injector Bags (30x16cm) 100 pcs
2 x	Vacuum pump P1-N
1 x	Screwdriver for Torx® TX6
2 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
2 x	1,5x50 mm allen screwdriver
1 x	Screwdriver for Hexagon 1,5mm
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Digital precision scale up to 2000 g
1 x	Z Bender - S Type Tool
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
2 x	2,0x50 mm allen screwdriver
1 x	Screwdriver for Torx® TX8
1 x	Digital scale up to 40 kg
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Starter EM Gear Power 80
2 x	3,0x60 mm allen screwdriver
2 x	Starter EM Gear Power 250
1 x	Screwdriver for Hexagon 1,27mm
1 x	Cut tube
1 x	M3 Maxi ball link (2 uds)
1 x	Remote electric ignition system
1 x	Wing Joiner ULTIMATUM 2.0 m
1 x	Aramid 50 daN 50 m
1 x	Profile ABS half cane 3x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Complete kit CAT 966G II WEDICO-construction-models
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Carbon plate 350x150x3.0 mm
1 x	Suncover 100cc Red
1 x	DLE 111 pipe plug
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x	Soldering tip for KAVAN soldering iron KAV66.8338
1 x	Switc electronic 30 Amp
1 x	Extension 2/3 lipos JST - JST/C
1 x	Interruptor SPS 70v 60/120A
1 x	JETImodel DPS 40
1 x	MAX BEC 2
1 x	Extension 6 lipos XH > EH
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	Presto SF Light Filler styrene-free (420 g)
1 x
1 x	Paint gun for sprays
1 x	Spark motor OS nº 3
1 x	Sparkplug Saito 400
1 x	Aluminium ignition bad (red)
1 x	DLE Ignition unit
1 x	Sparkplug ROSSI R8
1 x	TX 250 mW especial GOPRO
1 x	Check valve quick hose connector 4-4 mm
1 x	Propeller diller 5/6,3/8/9
1 x	550 cc gasoline fuel tank complet
1 x	"Taxi Tank" Fuel Tank
1 x	Deposito DUBRO 3000cc-100oz
1 x	Llave dinamomterica 74 Z 0 0 21
1 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x	Sandpaper file 13 mm
1 x	Rubber Insert soft, 1 Pcs.
1 x	PROXXON - SAW BLADE (50MM - 20T) (28017)
1 x	Heli blades angle measurer
1 x	EC-Cutter
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Hot Glue Stick RED
1 x	Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs
1 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x	4 mm Prop Adapter CN-Spinner
1 x	Propeller CFK 16x13
1 x	Propeller CFK 18,5x12
1 x	Pin hinge 39x20 mm (10 uds)
1 x	OS 37 SZ-H, Carburetor Wharf OS 40, 60, FS70, 91S and 120SE
1 x	Aluminium ignition bad (blue)
1 x	Compact on-board starting system (9512)
1 x	Transmitter Crystal 35 Mc/s Ch 62
1 x	Flap hinge (6 pcs)
1 x	MZ-18, 9 Channel HoTT
1 x	40 mm 1/4" Race propeller (rigth hydropropeller)
1 x	Transmitter Crystal 35 Mc/s Ch 77
1 x	Distanzstück motor OS 120 AX
1 x	Canopy Latch
1 x	Receiver Crystal 35 Mc/s Ch 62
1 x	Decorative caps, multicoloured, short
1 x	40,0 mm hydro-propeller (left hydropropeller)
1 x	Decorative caps, multicoloured
1 x	Receiver replacement antenna, approx. 85
1 x	Mini Infrared Thermomiter
1 x	2,3 mm Prop Adapter M6
1 x	5 mm Prop Adapter M8
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x	3,2 mm Prop Adapter M8
1 x	3 mm Prop Adapter M6
1 x	4 mm Prop Adapter M6
1 x	Sparkplug DLE CM6
1 x	STD excentric gearbox for 2,0mm axis (3,5:1)
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Propeller RF CFK 13x6.5
1 x	Propeller CFK 14.5x10 Slim
1 x	Propeller CFK 14x10
1 x	Propeller CFK 13x9
1 x	Propeller CFK 15x7
1 x	Propeller CFK 14x6.5
1 x	Propeller CFK 16x16 Wide
1 x	Compact Pitts Muffler OS MAX.35.40 FP
1 x	RCEXL Electronic ignition twin CM-6
1 x	Compact on-board starting system (9713)
1 x	Crystal Universal TX 35.140 Ch 74
1 x	CNC FPV Display screen&Transmitter Holder Vertical
1 x	Glases Nimbus
1 x	POLARON EX 800w charger
1 x	Spikes Band (5 m)
1 x	Foreman, scale 1:32
1 x	Charger LiPo Charger4
1 x	Spinner fixed propeller 60 mm / 5,0 mm
1 x	Spinner fixed propeller 42 mm / 5,0 mm
1 x	Propeller Pleg CAM-Prop 10x6 + Spinner
1 x	Adjustable brass horn threaded M3
1 x	MZ-10, 5 Channel HoTT
1 x	Propeller Pleg CAM-Prop 8x6
1 x	Transmitter GRAUPNER MZ-24 Pro
1 x	10 mm Prop Adapter M12
1 x	6 mm Prop Adapter M8
1 x	5 mm Prop Adapter M6
1 x	5 mm Prop Adapter M8
1 x	6 mm Prop Adapter M8

11,635.22EUR