57.90EUR 39.90EUR

Glases Nimbus
[CMNIMBUS]



Set de gafas, cristales y trapo

Funda (inclu�da) para guardar todo
The Nimbus polarised set represents our top-of-the-range frame. Nimbus sunglasses have been specifically designed and manufactured for radio controlled modellers, with interchangeable lenses for different light conditions - with the Category 0 yellow lenses fitted, you can even enjoy the benefits of light enhancement on a cloudy day.

Polarised sunglasses greatly reduce glare, which is an effect caused by light hitting horizontally flat surfaces. Polarised lenses filter out this light to greatly enhance your visibility.

Other manufacturers of interchangeables rarely offer polarised lenses as standard - they certainly don't give you TWO sets for your money! For that reason, we believe our Nimbus glasses are some of the best value sports sunglasses on the market for ANY sport.

Featuring 100% UVA / UVB protection, these polycarbonate glasses benefit from an especially high-quality, wrap-around frame design that blocks unwanted and annoying light and wind from the sides. The scratch-resistant lenses are de-centred, which negates the possibility of distortion caused by the lens curvature. Conforming to US ANSI Z80.3 and British and European safety standard EN1836, our sunglasses are subjected to a drop-test at the factory, and offer great protection against flying debris should you suffer a mishap. All of our glasses carry the renowned European Union 'CE' compliance mark.

The interchangeable lenses are: yellow (category 1) low light - these actually enhance light and contrast; beige (category 2), polarised, average sunlight; (category 3) polarised, bright sunlight; dark smoked (category 4), very bright conditions.

All glasses come with 4 x sets of lenses as standard, a cleaning cloth and a carry case with belt clip and internal compartments for housing the extra lenses. Our latest stock also includes a neck / head strap.


enought units
enought units

Reviews

Customers who bought this product also purchased
Metal clevis M2 (10 uds)
Metal clevis M2 (10 uds)

enought units
enought units

Connectors banna oro 2 mm (M/F)
Connectors banna oro 2 mm (M/F)

enought units
enought units

Servo HITEC HS-55
Servo HITEC HS-55

enought units
enought units

Short ball link M2 (6 uds)
Short ball link M2 (6 uds)

enought units
enought units

500 ccm complete gasoline fuel tank
500 ccm complete gasoline fuel tank

enought units
enought units

Blind nut M5 (4 pcs)
Blind nut M5 (4 pcs)

enought units
enought units

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Crimping tool
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x Turbina KINGTECH K320 G5
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x Adaptadores carga 6s JST-XH
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x Extension MPX-MPX 20 cm
2 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Xplorer4 anemometro
1 x Flap hinge 33x9 mm (6 pcs)
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x Ventral support for AX-18/AX-60
1 x Gates hinge 30x16 mm (2 pcs)
1 x Plasti Dip Liquid Tape 429 ml orange
1 x ABS tube 3.0x2.0x1000 mm
1 x 18 mm reinforced hinge
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Initior Receiver FRX2 Wireless
1 x Yellow smoke canister 140 g
1 x Green smoke canister 65 g
1 x 3l Smoke oil
1 x Red smoke canister 100 g
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Long pinned hinge (6 uds)
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x ABS tube 5.0x3.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x Smoke set "Glider"
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x "M" set
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Smoke set "S"
1 x ABS tube 6.0x5.0x1000 mm
2 x Carbon fiber rod 0.8 mmx1000 mm
1 x Blue smoke canister 100 g
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Red smoke canister 65 g
1 x ABS tube 6.0x4.0x1000 mm
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x ABS tube 16.0x14.0x1000 mm
1 x Straightened threaded rod M3 - 1m
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x Universal Colour Paste deep black 50 g
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x ABS tube 5.0x4.0x156 mm
2 x Carbon fiber rod 0.5 mmx1000 mm
1 x Universal Colour Paste white 50 g
1 x SERVO HOLDER
1 x ABS tube 20.0x18.0x1000 mm
1 x White smoke canister 65 g
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x ABS tube 12.0x10.0x1000 mm
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x "S" set for planes
1 x Yellow smoke canister 100 g
2 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x 1/10 Pilot "Jack"
1 x 1/4 Pilot "Mike"
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x ABS Strip 1.0x3.0x1000 mm
3 x SE Ring 450 mm (2 pcs)
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x 6 mm M3 variable inclined horn
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Piloto Jet "Green" 1/6 Scale
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x Strip ABS 2.0x3.0x1000 mm
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
1 x AXI 2204 Multicopter
1 x T-Motor U7-V2.0 Kv420
1 x ASPIRE Red ARF 2.000 mm, Fuselage
1 x ALBATROS L-39 G2 "Camo Tiger" Turbine ready
1 x HAWKER HUNTER 1:5,8 Desert (1.770mm)
1 x VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit
1 x ASPIRE Red ARF 2.000 mm, Set Alas
1 x HAWKER HUNTER 1:5,8, Electric retract landing gear
1 x F-16 Scale 1:6 (1.630mm)
1 x Electric Landing Gear Trainer Jet Intro
1 x SERVO DES 588 BB MG
1 x Program 5v SIO RS 232
1 x Electric Landing Gear F9F COUGAR
1 x 
1 x Crystal Universal RX 35.030 Ch 63
1 x 300 Newtons FEMA absorber
1 x Legs + electric brakes for Viper Jet 90
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
2 x Paint gun for sprays
1 x T-Hose connector 4-4-4mm
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x Squared carbon wing joinner 5x5x220 mm
1 x Towing hook <3m
1 x Retract undercarriage for gliders up to 2 Kg
1 x Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Marker ties (20 pcs)
1 x 
1 x SE Ring 250 mm (2 pcs)
1 x Tape GFK 50 mm
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x 20x1000 mm Ring Strap Back To Back
1 x Spikes Band (5 m)
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 360 mm (2 pcs)
1 x SE Ring 200 mm (2 pcs)
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x 
1 x Spray Graphit 33
1 x Spray EC Red 400ml
2 x Partall paste 650 g
1 x Quick hose connector 4-4 mm
1 x Landing gear strap medium (4 uds)
1 x T-Hose connector 3-3-3 mm
1 x Miniature brass strap hinge, 1 m
1 x Air pressure gauge
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x Y-Hose connector 6-6-6 mm
1 x 40 mm air cylinder
1 x Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm)
1 x Swing 1000
1 x Faucet FESTO
1 x Wheel cover holder Ø 6 mm (2 uds)
1 x Round flex hinge (12 uds)
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Wheel cover holder Ø 5 mm (2 uds)
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x Check valve quick hose connector 4-4 mm
1 x Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x Y-Hose connector 4-4-4mm
1 x Indoor hinge with servo arm integraded
1 x Pin hinge 39x20 mm (10 uds)
1 x Carbon fiber rod 14 mmx1000 mm
1 x Painting GHT Lexan Black 150 ml
1 x Flap hinge (6 pcs)
1 x Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x Servo arm with 4 mm hole to FEMA 9810A
1 x Retract undercarriage for gliders up to 3,5 Kg
1 x Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
1 x Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m
1 x Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m
1 x Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain)
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x 15x7 tree blades propeller
1 x Motor A20-26 M EVO
1 x Motor A10-7 L 4,4:1
1 x ESC PULSAR A-40
1 x FesEx-Uni6 System
1 x MZ-18, 9 Channel HoTT
1 x Transmitter GRAUPNER MZ-24 Pro
1 x Carbon Non-Woven, 240 g/m² 100 cm x 2m
1 x 20x200 mm battery rings
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Tape GFK 38 mm
2 x Cinta Goldfix 1m
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Foil for sticking flaps and ailerons
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x SE Ring 300 mm (2 pcs)
1 x SE Ring 400 mm (2 pcs)
1 x Ring 320 mm length (5 pcs)
1 x SE Ring HACKER 300 mm (2 pcs)
2 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x SE Ring 350 mm (2 pcs)
1 x SE Ring 330 mm (4 pcs)
1 x SE Ring 240 mm (2 pcs)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Tape GFK 25 mm
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 480 mm (2 pcs)
1 x Pilot "Goose" (Slimline)
1 x Glases Flitemaster
1 x 1/6 Pilot "Buddy"
25,905.62EUR
Manufacturers
Languages
Español English
Currencies