1 x | Connector Sub-D 2+5 Female |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | 4 LiPo XH>EH adapter |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | CC 03 |
1 x | Cabling for Fox MDM1 wings |
2 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | UBEC 6A KAVAN |
1 x | 3 LiPo XH>EH adapter |
1 x | CC 05 |
1 x | CC 01 |
1 x | 30 cm BEC cable (male) |
1 x | Connector Sub-D 2+5 Male |
1 x | CC 02 |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Connector CAN 15 |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | 5 LiPo XH>EH adapter |
1 x | BEC 3A FOXY |
1 x | 30 cm BEC cable (female) |
1 x | DPS Switch JR/JR |
2 x | Circlick securite |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
2 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Straightened threaded rod M3 - 1m |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
2 x | Round Rod 1,25x1000 mm |
1 x | Strip 3,5x1,75x330 mm |
2 x | Strip ABS 2.0x10.0x1000 mm |
2 x | Round Rod 1,0x1000 mm |
1 x | ABS Strip 1.0x3.0x1000 mm |
2 x | Round Rod 5,0x1000 mm |
3 x | Round Rod 1,5x1000 mm |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Round Rod 4,0x1000 mm |
3 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Strip 1,5x1,5x330 mm |
2 x | ABS Strip 1.5x3.0x1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
2 x | ABS Strip 1.0x5.0x1000 mm |
1 x | ABS I Strip 20x10x1000 mm |
2 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Strip 2,0x2,0x330 mm |
1 x | 1/12 Pilot "Fighter" |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | EWC6 40 cm wing connector |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
4 x | Soporte grifo FESTO vertical (1 pcs) |
2 x | Support XT60 conector (2 pcs) |
2 x | Soporte filtro FESTO (4 pcs) |
3 x | Tube support Ø 6mm (10 pcs) |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
2 x | Wheel FEMA 82 mm / 5 mm |
2 x | Wheel FEMA 100 mm / 6 mm |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Round Rod 2,5x1000 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
1 x | Glass fabric 390 g/m² aero,10x1m |
1 x | Panel Honeycom carbon 350x150x3.5mm |
1 x | Glass fabric 425 g/m² aero,10x1m |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Digital precision scale up to 2000 g |
1 x | Vacuum pump P1-N |
1 x | 1,5x50 mm allen screwdriver |
1 x | RANGER Jet CANADA 1.854mm combo |
1 x | Z Bender - S Type Tool |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | ABS Strip 1.5x4.0x1000 mm |
2 x | Strip ABS 2.0x8.0x1000 mm |
2 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
2 x | 20 mm tail wheel for 0,5-1 Kg models |
2 x | Nose wheel 62 mm |
2 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | LiPo Storage Box Standard 1 Type 1 |
2 x | Support pumb/filter Xicoy X45 |
2 x | Support Flush MPX Conector (6 pcs) |
1 x | Support conector MPX (6 pcs) |
3 x | Recessed MPX connector support (6 pcs) |
2 x | Actuador lineal HLS12-100210-7.4v |
1 x | Battery LiPo GENS 2600 mAh 2S 7.4v Transmitter Pack (Gens Ace) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Lipo RAY 2200 mAh 2s 7.4v 30C |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | MPX Support (2 pcs) |
2 x | PVC yellow battery termo-retract 69 mm (10 m) |
2 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery |
1 x | PVC transparent battery termo-retract 51 mm (1 m) |
1 x | PVC termo-retract battery 95 mm blue transparent (1 m) |
2 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
2 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | PVC lilac battery termo-retract 70 mm (10 m) |
1 x | PVC transparent battery termo-retract 85 mm (1 m) |
1 x | PVC red battery termo-retract 68 mm (10 m) |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
2 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
2 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
1 x | Red 4 mm connector holder |
1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
2 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
2 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Steel brush wheel with 2.35mm |
1 x | RANGER Jet NAVY 1.854mm combo |
1 x | Screwdriver for Torx® TX6 |
1 x | Round Rod 3,0x1000 mm |
1 x | Boomerang SPRINT V2 Red/Yellow |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Satellite receiver DUPLEX Rsat 900 NG MHz |
1 x | DUPLEX Satellite receiver Rsat 900 |
1 x | DUPLEX R14 receiver 2,4GHz |
1 x | DUPLEX R12 EPC receiver 2,4GHz |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Smart Soldering Iron 110W/230V AC |
1 x | Tool for entel |
1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
1 x | DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC) |
1 x | NoNa BB wheel Ø175x55mm in pair |
1 x | SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS) |
2 x | Super light ∅45x9 mm axi ∅3 mm metalic core wheel |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Receiver DUPLEX R9 EX 2.4 GHz |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | Receiver DUPLEX R5L EX 2.4 GHz |
1 x | DUPLEX R6 EX receiver 2,4GHz |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | DUPLEX R7 REX receiver 2,4GHz A40 |
1 x | Receiver DUPLEX R3L EX 2.4 GHz |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | DUPLEX R7 receiver nano 2,4 GHz |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | Receiver DUPLEX REX 3 2.4 GHz |
1 x | Receptor DUPLEX REX R9 Slim Assit |
1 x | DUPLEX R7 receiver 2,4GHz |
1 x | Battery voltage telemetry |
1 x | Tank GFK Opus/JEt 300 ml |
1 x | OPUS-V / Jet-CC-BF |
1 x | 50N turbine start protection tube |
1 x | Sealing Iron Profi LCD |
1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | Sealing Iron Sleeve PROF |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Screwdriver for Torx® TX8 |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Starter EM Gear Power 250 |
1 x | Vacuum pump 12 CFM |
1 x | Sub-D Plug Mold |
1 x | Tube bender |
1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
1 x | Universal Filter |
1 x | Starter EM Gear Power 80 |
1 x | XT-60 Plug Mold |
1 x | Tool for entel |
1 x | Z Bender - S Type Tool |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | Tachometer Hyperion Multi-pala |
2 x | Pilatus PC-21 2100 mm RED/WHITE (SebArt) |
2 x | Super Light Wheels(Sponge Tyre) Ø 55mm x 19mm (2pcs) axis Ø 3.5m |
2 x | 102x26 Ø6.0 mm aluminium core wheel |
1 x | Pilatus PC-21 50E, GLOW set conversion (SebArt) |
1 x | DORNIER DO 335 EP ARF 1724 mm |
1 x | Wheel FEMA 112 mm / 6 mm |
1 x | Support ECU Xicoy X-45 |
1 x | Wheel Ø 90 mm (1 ud) Electron Retracts |
1 x | resin-hardener L-385 H-385 (1250 g) |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
1 x | Servo HITEC HS-5485 HB Digi |
1 x | Wheel Scale 1/3 Vintage 240 mm / 9.33" (1 par) |
1 x | Superlight wheel 125 mm with valve (2 pcs) |
1 x | Wheel Scale 1/4 Vintage 178 mm / 7" (1 par) |
1 x | Wheel FEMA 140 mm / 6 mm |
1 x | Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds) |
1 x | Wheel 22 mm |
1 x | Super Light Wheels(Sponge Tyre) Ø 65mm x 19mm (2pcs) axis Ø 3.5m |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Wheel FEMA 165 mm / 8 mm |
1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
1 x | SUPER DIMONA TC-80 |
1 x | Support FUEL DOT V3 |
1 x | YAK-23 "FLORA" (RBC Kits) |
1 x | Pilatus PC-21 + LG.2100 mm RED/WHITE (SebArt) |
1 x | Foam wheel Ø 351 mm (2 pcs) |
1 x | SF260 SIAI MARCHETTI 50E red/white (SebArt) |
1 x | Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm) |
1 x | Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m |
1 x | Wheel 38 mm V2 |
1 x | Pilatus PC-21 + LG.2100 mm BLUE/WHITE (SebArt) |
1 x | Support Pitot JETI |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
1 x | Wheel FEMA 70 mm / 5 mm |
1 x | SF260 SIAI MARCHETTI 50E yellow/black (SebArt) |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
1 x | resin-hardener L-385 H-385 (625 g) |
1 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
1 x | Servo HITEC HS-225 MG |
1 x | Servo Digital HITEC HS-5065 MG |
1 x | Servo HITEC HS-45 HB |
1 x | Wheel FEMA 127 mm / 6 mm |
1 x | Pilatus PC-21 2100 mm BLUE/WHITE (SebArt) |
1 x | Pilatus PC-21 50E, Electric L.G (SebArt) |
1 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
1 x | DC-3 Douglas (White/Blue) 1800 mm |
1 x | DC-3 Douglas (DAKOTA) 1800 mm Electric LG |
1 x | Wheel FEMA 152 mm / 8 mm |
1 x | Skyray (RBC Kits) |
1 x | Super Light Wheels (Sponge Tyre) Ø 60mm x 19 mm (2pcs) axis Ø 3. |
1 x | DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Pilatus PC-21 50E BLUE/WHITE (SebArt) |
1 x | 60x25 mm tail wheel "type F3A" |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | 2.5 inch aluminium core wheel (1 pcs) |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Foam wheel Ø 38 mm (2 pcs) |
1 x | Super Light Wheels(Sponge Tyre) Ø 50mm x 19mm (2pcs) axis Ø 3.5m |
1 x | 69x25 mm (2.75") axle Ø4 mm aluminium core wheel |
1 x | 70x23 Ø3.5 mm aluminium core wheel |
1 x | Pilatus PC-21 50E, wings carrying bags (SebArt) |
1 x | Wheel 18 mm |
1 x | White gelcoat 1 Kg |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | MEKP Harderner 100 g |
1 x | Mould Resin P 10 kg |
1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
1 x | Hardener Aero EPH 161 (500 g) |
1 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | Hardener P-25, canister 2.5Kg |
1 x | resin-hardener L-385 H-385 (5000 g) |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Receptor MINIMA 6S HITEC |
1 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
1 x | Servo HITEC HS-325 BB |
1 x | Servo HITEC HS-5475 HB Digi |
1 x | Servo HITEC HS-45 HB, servo box |
1 x | HITEC DPC-11 programmer |
1 x | Servo HS-5070 MH Hi Volt |
1 x | Servo HITEC D625 MW |
1 x | Servo HITEC D951 TW |
1 x | Servo HITEC D954 TW |
1 x | Servo HITEC D131 MW nano |
1 x | Servo HITEC HS-5087 MH |
1 x | Servo HITEC HS-125 MG |
1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
1 x | Servo HITEC HS-311 |
1 x | Servo HITEC D941 TW |
1 x | Servo HITEC HS-53 |
1 x | Servo HITEC D645 MW |
1 x | Servo HITEC D145 SW |
|
28,542.84EUR |