1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x ABS angle 1.5x1.5x1000 mm
1 x ABS angle 3,0x3,0x1000 mm
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x Profile ABS Square 1 x 1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x ABS angle 6,0x6,0x1000 mm
2 x U Profile ABS 8,0x4,0x1000 mm
1 x Profile ABS half cane 2.0x1000 mm
1 x L-Connector 1.5 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x Profile ABS half cane 3x1000 mm
1 x U Profile ABS 1,0x2,0x1000 mm
1 x Profile ABS half cane 2.5x1000 mm
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x Profile ABS Square 2 x 1000 mm
1 x Profile ABS Square 3 x 1000 mm
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x U Profile ABS 2,0x4,0x1000 mm
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x L-Connector 1.0 mm x 1000 mm
1 x U Profile ABS 5,0x10,0x1000 mm
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Cross Connector 4.0 mm x 1000 mm
2 x Profile ABS Square 4 x 1000 mm
2 x ABS "T" angle 6.0x6.0x1000 mm
1 x Extension silicon 35 cm male (Futaba)
1 x Futaba Female 40 cm extension
1 x Extension 7.5 cm
1 x Futaba male 40 cm extension
1 x Cabel "Y" 30 cm (Futaba)
2 x 200 mm extensión servo HITEC/JR
1 x Extension silicon 30 cm female (Graupner)
1 x Extension lead 15 cm Multiplex
1 x Extension silicon 30 cm male (Graupner)
1 x Premium servo extension 100cm
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Extension silicon 10 cm (Graupner)
1 x Extension PVC 150 cm (Graupner)
1 x Extension 100 cm (Futaba)
1 x Extension 30 cm (Futaba)
1 x Circlick securite
1 x Cabel "Y" 15 cm
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Spring lock washer 2.1 mm (20 pcs)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Flat washer 2.2 mm (20 pcs)
1 x Quicklock washer 3.5 mm (10 pcs)
2 x M3 black washers (4 pcs)
1 x Quicklock washer 1 mm (10 pcs)
1 x Circlik for shaft 1.5 mm (10 pcs)
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x M3-M4 rubber washer (8 pcs)
1 x Quicklock washer 2 mm (10 pcs)
1 x Quicklock washer 3 mm (10 pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Lock washer 3.2 mm (20 pcs)
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Connectors banna oro 8,0 mm (M/F)
1 x Conector BEC female (10 pcs)
1 x Ball link M3 (6 uds)
1 x Long ball link M1.6 (6 uds)
1 x Oratex Red Fokker 10 m
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x SE Ring 250 mm (2 pcs)
1 x Smoke set "Glider"
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x Profile ABS triangular 2.0x1000 mm 90º
2 x Flat Connector 4.0 mm x 1000 mm
1 x Actuador lineal HLS12-100210-7.4v
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Cabel "Y" 30 cm (graupner)
1 x Futaba Female 40 cm extension
1 x L-Connector 4.0 mm x 1000 mm
1 x Blind nut M4 (4 pcs)
1 x Prolongador S-Bus JR/JR 20cm
1 x Extension silicon 35 cm (Futaba)
1 x Extension silicon 50 cm (Graupner)
1 x Extension silicon 75 cm (Graupner)
2 x Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs)
1 x SPS Remote switch actuator
1 x MAX BEC 2D plus EX
1 x MAX BEC 2
1 x Extension 5 lipos JST - JST/C
1 x PowerBox SparkSwitch RS
1 x Female connector for 20 pines AWG
1 x EWC3 100 cm wing connector
1 x Male connector for 12 pines AWG
1 x Female connector for 6 pines AWG
1 x DPS Switch JR/JR
1 x USB Interface REVOLECTRIX for CellPRO 10s
1 x FX three-position switched channel, long
1 x wing/fuselage connector for 3 pines AWG 20-24
1 x PWC4 wing/fuselage connector for 4 servos
1 x Male connector for 16 pines AWG
1 x Extension silicon 100 cm (Graupner)
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Spring lock washer 2.6 mm (20 pcs)
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Blind nut M4 (10 pcs)
1 x Blue Aluminium lock nut M3 (4 pcs)
1 x Tapping Screw M2.9x13 (10 pcs)
1 x Nut for mounting M2 (4 pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Threaded insert M6 (10 pcs)
1 x Hexagonal Nut M4 (10 pcs)
1 x Blind nut M5 (4 pcs)
1 x Hexagonal Nut M4 (20 pcs)
1 x Treaded hexagonal socket insert M3 Br (4 pcs)
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x Extension MPX-MPX 20 cm
1 x Dean "T" - Futaba Adapter
1 x 2 piece mounting frame Battery 3200 / 4000
1 x 12V Car Adapter
1 x 200m servo "Premium" wire (white/red/blue)
1 x External LED's (2 pcs)
1 x 30 cm MULTIPLEX female connector
1 x Adapter lead MPX/EC3
1 x MicroMatch PowerBox
1 x 30 cm DEANS female connector
1 x Extension for LC-Display 50cm
1 x Conector JR Servo male (10 pcs)
1 x BlueCom™ Adapter (iOS)
1 x KingTech T-Modul 5 in 1 Telemetry
1 x FOD Screen K140G/K180G/K210G
1 x Battery LiFe -3800/25C-3S 9.9V
1 x Turbina DRAGON 30 Kg
1 x KingTech K45TP G4 Turboprop
1 x Turbina KINGTECH K260 G4
1 x Clamp K30 G3
1 x Battery LiFe -1450/25C-3S 9.9V
1 x KingTech Turbineoil 10L
1 x Exhaust K45TP
1 x Micro Switch button
1 x Spark Ceramic JETCENTRAL
1 x Electric starter BEE (old)
1 x Power Pack SE Series JETCENTRAL
1 x Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled
1 x Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs)
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs)
1 x 38x4,5 mm wires output (2 pcs)
1 x Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs)
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Cable tie mounts 4.3 (4 uds)
1 x Cable grommet Ø 5 mm (4 uds)
1 x TP/TopFuel - XH 2/3S Adapter
1 x Opto Gas Engine Kill Switch
1 x PSC 5
1 x wing/fuselage connector for 12 pines AWG 20-24
1 x Selfstart electronic switch
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Extension 15 cm (Futaba)
15,566.82EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies