Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Servo GO-1006MG (0.052s/60º, 3.0Kg)
52.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

2 x	Altímetro Altis NANO
1 x	Cable telemetría ALTIS 20 cm
3 x	Cable telemetría ALTIS para Futaba
1 x	Cable telemetría ALTIS 12 cm
3 x	Cable telemetría ALTIS 6 cm
4 x	Programador ALTIS V4
1 x	Altímetro Altis V4
1 x	Gancho de remolque + 4,5 m
1 x	Gancho de remolque hasta 3m
1 x	Gancho de lanzamiento fijo
2 x	Cierre cabina 33/23.5mm (2 uds)
2 x	Gancho remolque inferior plano
2 x	Cierre cabina aluminio Ø5, I=16 mm
2 x	Bancada servo gancho
1 x	Brazo direccional 12 mm Ø 4 mm
1 x	Casquillo para grimpar cable de 0,85 mm (10 pcs)
2 x	Brazo direccional 16 mm Ø 3 mm ( 2 uds)
2 x	Aero frenos eléctricos para veleros 250 mm (2 pcs)
3 x	Cable acero trenzado Ø 0,5 mm (20 m)
1 x	Cierre cabina V1 M3 Azul (2 pcs)
3 x	Anclaje cabina de soporte horizontal "tipo F3A" (2 pcs)
2 x	Acoplador de aluminio para tubo de carbono 6/M4
2 x	Brazo direccional 16 mm Ø 4 mm ( 2 uds)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Cable acero trenzado Ø 1,3 mm (10 m)
1 x	Cierre cubiertas o carenados
1 x	Brazo direccional 12 mm Ø 4 mm ( 2 uds)
1 x	Gancho de remolcador
1 x	Abrazadera 3.2x142 (20 uds)
1 x	Gancho de remolque hasta 4,5 m
1 x	Abrazadera 4.6x203 (20 uds)
1 x	Tubo carbono 3K-PW (Ø25 mm, Ø21 mm L:1000 mm)
1 x	Listón de BALSA 3,0x5,0x1000 mm
1 x	Listón de CAOBA 2,0x2,0x1000 mm
1 x	Varilla carbono plana 10.0 x 1.0 x 1000 mm
1 x	Varilla carbono 8.0 mmx1000 mm
1 x	Piloto civil "Joe" tamaño 9cm (Slimline)
1 x	Cable servos silicona 0,50 mm2 Futaba (100 m)
1 x	Altímetro MultiLog
2 x	Brazo direccional 16 mm Ø 3 mm
1 x	Conjunto bieleta 45 mm y rótulas T. para dirección
1 x	Varilla mando doble roscada aluminio M3 80 mm (2 pcs)
1 x	Varilla mando roscada M3 (2 uds)
1 x	Anclaje varilla mando M2 mm prisionero/tuerca (2 uds)
1 x	Pasacable de goma Ø 5 mm (4 uds)
1 x	Conjunto bieleta 140 mm para dirección
1 x	Varilla mando doble roscada SUS303 M2.5 65 mm (2 pcs)
1 x	Cable acero trenzado Ø 0,5 mm (2 m)
1 x	Pasacable de goma 9.5 mm (4 uds)
1 x	Varilla mando doble roscada duraluminio M3 40 mm (2 pcs)
1 x	Varilla mando doble roscada aluminio M3 70 mm (2 pcs)
1 x	Conjunto bieleta 140 mm y rótulas T. para dirección
1 x	Soporte abrazaderas 4.3 (4 uds)
1 x	Varilla mando doble roscada duraluminio M3 70 mm (2 pcs)
2 x	Cable acero trenzado Ø 0.88 mm - 60 kp (10 m)
1 x	Cierre cabina tipo FOX MDM1 4m (1 par)
1 x	Transmision funda/varilla octog. plastica 3/2
1 x	Prolong. XH / XH 30 cm para 6 elem. cables silicona 0,25 mm2
1 x	Prolong. Hembra XH 30 cm para 5 elem. cables silicona 0,25 mm2
1 x	Funda Protectora espiral negra cables Ø 0,5/50 mm - 25 m
1 x	Funda anticalorica de fibra de vidrio Ø 8 mm 1000 mm
2 x	Cierre cabina
1 x	Cargador POLARON EX 800 W
1 x	Transmision funda/varilla octog. plastica 4/3
1 x	Brazo direccional 12 mm Ø 3 mm ( 2 uds)
1 x	Anclaje varilla mando Ø 2 mm prisionero/circlick (2 uds)
1 x	Prisionero aluminio 2.5 mm Ø (4 uds)
1 x	Pasacable de goma Ø 3.2 mm (4 uds)
1 x	Transmision funda/varilla octog. plastica 3/2 porta kwik link M2
1 x	Salida para cables 41x5,5 mm (2 pcs)
1 x	Varilla mando doble roscada duraluminio M3 130 mm (2 pcs)
1 x	Transmision funda/varilla octog. plastica 4/3 porta kwik link M3
2 x	Mini Clips para fijar Ala (2 pcs)
1 x	Varilla mando doble roscada aluminio M3 60 mm (2 pcs) knurled
2 x	Cable acero trenzado Ø 0,62 mm (10 m)
1 x	Varilla mando doble roscada duraluminio M3 100 mm (2 pcs)
1 x	Anclaje micro varilla mando Ø 1 mm prisionero/arandela (2 uds)
1 x	Prisionero aluminio 2 mm Ø (4 uds)
1 x	Cierre cabina V1 M3 Rojo (2 pcs)
2 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Tren aterrizaje Electrico "Black Edition" BULL Mo1 2.6 GS200 (El
1 x	Cabina BULL MØ1 2.600mm
1 x	Bayoneta BULL MØ1 2.600mm
2 x	Pipa Jet ULTIMATUM 2m
1 x	Deposito ULTIMATUM 2.0 (3.2 L) PRO
1 x	Tren aterrizaje Electrico ULTIMATUM 2.0 RS-200 w/o programmer (E
2 x	Set transmisiones ULTIMATUM 2.0 (duraluminio)
1 x	Tren aterrizaje Electrico "Black Edition" ULTIMATUM 2.0 (Electro
1 x	Deposito ULTIMATUM 2.0 (3.2 L) + Smoke (0.9 L) PRO
2 x	Set transmisiones ULTIMATUM 2.0 (acero/aluminio)
1 x	GPS Altis
2 x	Tren aterrizaje Electrico ULTIMATUM 2.0 (Electron Retracs)
2 x	Device Terminal
1 x	Tren aterrizaje Electrico "Black Edition" BULL Mo1 2.6 (Electron
1 x	Deposito Kevlar BULL Mo1 3L + 1L Smoke (CMJets)
1 x	BULL MØ1 2.600mm GREEN
1 x	Funda Protectora cables Ø 20 mm 1000 mm
1 x	Funda anticalorica de fibra de vidrio Ø 6 mm 1000 mm
1 x	Conjunto bieleta 90 mm y rótulas T. para dirección
1 x	Cargador LiPo Charger4
1 x	Prisionero aluminio 3 mm Ø (4 uds)
1 x	Arandela conica alumino M3 azul (8 pcs)
1 x	Arandela conica ancha alumino M4 Azul (4 pcs)
1 x	Motor XPower XC 3522/5 LS
1 x	Prisionero 5 mm Ø (4 uds)
1 x	Pin corto M2 (10 uds)
1 x	Motor Mega AC 16/07/06
1 x	Motor Mega AC 16/15/07
1 x	Motor Mega AC 22/20/03
1 x	Motor Mega AC 16/07/08
1 x	Cierre para cable de acero diam. 0,5 (10 pcs)
1 x	Motor Mega AC 16/07/04
1 x	Cierre para cabinas aluminio 4.7g
1 x	Motor Mega AC 16/15/08
1 x	Goma cierre cabinas 5m
1 x	Motor Mega AC CAR 10 PRO
1 x	Arandelas 2.2×4
1 x	Adaptador de hélice 3 mm M5 (largo)
1 x	Arandela conica ancha alumino M3 rojo (4 pcs)
1 x	Bancada servo tandem 4,5-5" para 2 servos
1 x	Brazo direccional 16 mm Ø 4 mm
1 x	Bayoneta ULTIMATUM 2.0 m
1 x	Pipa BULL MØ1 2.600mm

16,570.07EUR