Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Emisora Spektrum NX10 10ch (solo Tx)
619.92EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Horn control flaps (1 pcs)
1 x	Acople ALU M2 Ø 4 (2 uds)
2 x	Horn de control para SlowFlyer (3 pcs)
1 x	Cable servos silicona 0,50 mm2 Graupner (5 m)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Cable servo PVC 0,14 mm2 Hitec/Mpx (5 m)
2 x	Horn con ball 40x30
1 x	Cable PVC 2 x 0.25 mm2 (5 m) rojo-negro
1 x	Cable servos silicona 0,14 mm2 Graupner (100 m)
1 x	Horn con ball 55x40
1 x	Cable servos PVC 0,08 mm2 Futaba (5 m)
1 x	Cable servo PVC 0,14 mm2 FUTABA (5 m)
1 x	Cable servo PREMIUM 50m (blanco/rojo/azul)
1 x	Horn de mando carbono 20 mm
1 x	Cable silicona 0,25 mm² blanco (25 m)
1 x	Cable servo PVC 0,14 mm2 JR/Graupner (5 m)
1 x	Horn aluminio roscado 6 mm con rótula
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	Cable con accesorios
2 x	Cable servo PREMIUM 10m (blanco/rojo/azul)
1 x	Horn aluminio LH largo L31xH30 (2pcs)
1 x	Cable servos PVC 0,14 mm2 Graupner (100 m)
1 x	Cable Cargador FUTABA
2 x	Horn aluminio negro LH largo L31xH30 (2pcs)
1 x	Cinta fibra vidrio 25 mm
1 x	Sistema cierre 400 mm con abrazadera (2 pcs)
1 x	Sistema cierre 200 mm con abrazadera (2 pcs)
1 x	Sistema cierre 300 mm con abrazadera (2 pcs)
1 x	Sistema cierre baterías 20x200 mm
1 x	Sistema cierre 240 mm con abrazadera (2 pcs)
1 x	Bridas 1,66x71 / 0,07x2,8"mm (20 pcs)
1 x	Cinta autoadhesiva 10 mm x 12m; Diente 0.5 mm
1 x	Sistema cierre 480 mm con abrazadera (2 pcs)
1 x	Sistema cierre 450 mm con abrazadera (2 pcs)
1 x	Sistema cierre 350 mm con abrazadera (2 pcs)
1 x	Cinta autoadhesiva 5 mm x 16.80m; Diente 0.5 mm
2 x	Cinta alerones 1m x 10mm
1 x	Cinta autoadhesiva 13 mm x 16.80m; Diente 1.0 mm
1 x	Sistema cierre 330 mm con abrazadera (4 pcs)
1 x	Cinta autoadhesiva 20 mm x 12m; Diente 1.0 mm
1 x	Soporte para bridas de hasta 3 mm (10 pcs)
2 x	Cinta RUDDOG proteccion calor 2m x 50 mm
1 x	Conector banana oro 3,5 mm
2 x	Conector banana oro 8,0 mm 5 pcs (hembra)
1 x	Conector banana oro 5,5 mm
1 x	Conector equilibrado XH (2S) hembra (2 pcs)
1 x	Conector ala MPX 8 pines con conector M/H
1 x	Conector banana oro 2 mm (Ultralight)
1 x	Conector banana oro 8,0 mm. 5 pcs (macho)
2 x	Conector BEC macho (10 pcs)
1 x	Conector DEANS 4 pines (1 par)
1 x	Conector banana oro 8,0 mm
2 x	Conector equilibrado XH (4S) hembra (2 pcs)
1 x	Conector equilibrado XH (3S) hembra (2 pcs)
1 x	Conector DEANS (T)
2 x	Conector banana oro 6,0 mm
1 x	Conector banana oro 4 mm (Ultralight)
1 x	Conector equilibrado XH (3S) macho (2 pcs)
1 x	Conector banana oro 5,5 mm antichispa
2 x	Adaptador Sub-d conector MPX
1 x	Conector BEC hembra (10 pcs)
1 x	Conector 2 mm macho (2 pcs) con conector de seguridad
2 x	Conector 2 mm hembra (2 pcs) con conector de seguridad
1 x	Conector banana oro 2 mm
1 x	Rótula larga M3 con bola/base, tornillo y tuerca (2 uds)
1 x	Tubo ABS 18,0x16,0x1000 mm
1 x	Barniz Tensor 1000 ml
1 x	Bisagra de aluminio tipo PIN 6x98 mm (2 pcs)
1 x	Liston ABS 1,5x6,0x1000 mm
1 x	Abrazadera con letrero (20 pcs)
1 x	Pletina MPX 4 pines (5 uds)
1 x	Varilla acero Ø 14,0 mm x 1000 mm
1 x	Conector MPX negro macho
1 x	Acople ALU M2 Ø 3 (2 uds)
1 x	Biberon 500 ccm Glow
1 x	Horn mando small (2 pcs)
1 x	Horn mando long (2 pcs)
2 x	Horn aluminio pequeño azul (2pcs)
2 x	Horn 20x28,5 mm (2 pcs)
1 x	Anemometro Xplorer3
1 x	Horn micro type4 Ø 0,5(2 pcs)
1 x	Horn largo 50x26
1 x	Horn de mando largo con rodamiento (2 ud)
1 x	Horn de mando corto ajustable 3x24
2 x	Chispometro con cargador
1 x	Horn corto de latón M2 para cable (2 pcs)
1 x	Conector XT-60 (macho)
2 x	Pletina MPX 8 pines (5 uds)
2 x	Conector FUTABA Servo hembra (10 pcs)
1 x	Conector XT-30 (macho)
1 x	Conector MR30 (hembra)
1 x	Varilla acero Ø 2,5 mm x 1000 mm
1 x	Conector banana oro 2,5 mm (pareja)
1 x	Conector XT-30 (hembra)
1 x	Varilla acero roscada M3 -1m
1 x	Conector equilibrado XH (8S) macho (2 pcs)
1 x	Soporte carbono MR30 (2 pcs)
1 x	Cinta SURFACE 21mm x 5m
1 x	Varilla acero Ø 4,5 mm x 1000 mm
2 x	Conector JR Servo hembra (10 pcs)
1 x	Conector MPX macho (doble PIN)
1 x	Conexión alas 2 servos JR/Graupner 50 cm
1 x	Conector MULTIPLEX hembra 30 cm
2 x	Conector MPX hembra (doble PIN)
2 x	Conector magnetico "locking system"
1 x	Soporte de seguridad conector MPX (4 pcs)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Rueda 152x46 centro aluminio Ø6.0 mm
1 x	Piloto 1/7 "Japonés"
1 x	Prolongador motor XXL Blazing 60-83 mm
1 x	Piloto 1/10 "Jimmy"
1 x	Soporte aluminio para encendido (rojo)
1 x	Ball joint long
1 x	Eje de la cabeza rotora LA500
1 x	Bahía de la batería
1 x	Grub screw M3x3 shouldered (2 pcs)
1 x	Parte inferior del rotor Nueva
2 x	Oracover Gris Seafire Sea 2m
1 x	Destornillador Torx® TX6
1 x	OS 75 AX, Cigüeñal
1 x	Protector Conector Dean-T (1 pareja)
1 x	Protector Conector MPX (1 pareja)
1 x	Conector JR Servo hembra (50 pcs)
1 x	Pletina MPX (5 pcs)
1 x	Rueda KOVO SLH 110x55 mm
1 x	Taco goma 11 mm (14 pcs)
1 x	Soporte trasero 15 mm para motor gasolina
1 x	Oratex Yellow Cub 10 m
1 x	Arandela conica ancha alumino M3 oro (4 pcs)
1 x	Brazo servo aluminio V1-JR 1,0" M2 dorado
1 x	Piloto LA 500
1 x	Núcleo de la cabeza rotora LA500
1 x	Arandelas 2.2×4
1 x	Parte superior del rotor
1 x	Enganche de las palas del rotor
1 x	Autogiro LA500
1 x	Parallamas
1 x	Palas de autogiro de 330 mm
1 x	Carena delantera LA500
1 x	Motor simulado Cierva C30
1 x	Autogiro Cierva C30 Spain
1 x	Parte inferior del rotor
1 x	Micro Tarjeta SD Rapid Rush 16 GB
1 x	Adaptador Dean "T" - Futaba
1 x	Cable servo PREMIUM 1 m (blanco/rojo/azul)
1 x	APM2,6 Power module con BEC 5,3 V DC
1 x	Cargador Adaptador 12v coche
1 x	Cable servos silicona 0,35 mm2 Graupner (100 m)
1 x	Fan trasero A60
1 x	OS 37 SZ-H, Bulón pistón
1 x	Cinta autoadhesiva 8 mm x 16.80m; Diente 0.5 mm
1 x	Destornillador Allen 1.5 mm
1 x	Bancada Aluminio set radial motor A60-V2
1 x	Adaptador TP/TopFuel - JST-EH 4/5S
1 x	Adaptador para motor A60-V2
1 x	Escape Pitts OS MAX.35.40 FP
1 x	Carga cohete D3-P
1 x	Conector 5,0 mm EC5 macho con funda (2 pcs)
1 x	Conector MT-60 (pareja)
1 x	Soporte conector MPX macho (6 pcs)
1 x	Arandela conica ancha alumino M4 Negro (4 pcs)
1 x	Conector MPX macho
1 x	Conector JR Servo hembra (10 pcs)
1 x	Soporte conector MPX (2 pcs)
1 x	Controladora de motor individual SyRen 10A 6V-24V
1 x	Conector MPX 8 pins (verde) 1 par (macho-hembra)
1 x	Conector Centralita Optotronix Aurora
1 x	Soporte conector MPX
1 x	Adaptador para motor A50
1 x	Conector equilibrado XH (2S) macho (2 pcs)

2,880.84EUR