Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Opto Gas Engine Kill Switch temporarily out of stock	Propeller MENZ-S 17x10 temporarily out of stock	Propeller MENZ-S 18x12 temporarily out of stock
Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	XT-60 connector (female) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Receptor DUPLEX REX 7 Slim 2.4EX
114.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Horn for flap control (1 pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
2 x	SlowFlyer control horn (3 pcs)
1 x	Silicone 0,50 qmm servos wire Graupner(5 m)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
2 x	Horn with ball 40x30
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	Horn with ball 55x40
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	50m servo "Premium" wire (white/red/blue)
1 x	20 mm carbon horn
1 x	White silicone 0,25 mm² wire (25 m)
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	6 mm aluminium horn with patella
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	Cable with accesories
2 x	10m servo "Premium" wire (white/red/blue)
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Cable Cargador FUTABA
2 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Tape GFK 25 mm
1 x	SE Ring 400 mm (2 pcs)
1 x	SE Ring 200 mm (2 pcs)
1 x	SE Ring 300 mm (2 pcs)
1 x	20x200 mm battery rings
1 x	SE Ring 240 mm (2 pcs)
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 480 mm (2 pcs)
1 x	SE Ring 450 mm (2 pcs)
1 x	SE Ring 350 mm (2 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Foil for sticking flaps and ailerons
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 330 mm (4 pcs)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Connectors banna oro 3,5 mm (M/F)
2 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	XH female balance (2S) connector (2 pcs)
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
2 x	Conector BEC male (10 pcs)
1 x	Connectors DEANS 4 pins (1 pair)
1 x	Connectors banna oro 8,0 mm (M/F)
2 x	XH female balance (4S) connector (2 pcs)
1 x	XH female balance (3S) connector (2 pcs)
1 x	Connectors DEANS (T)
2 x	Connectors banna oro 6,0 mm (M/F)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	XH male balance (3S) connector (2 pcs)
1 x	Gold antispark 5,5 mm plug
2 x	MPX Sub-D Adaptor
1 x	Conector BEC female (10 pcs)
1 x	2 mm male connector (2 pcs) with safety connector
2 x	2 mm female connector (2 pcs) with safety connector
1 x	Connectors banna oro 2 mm (M/F)
1 x	Socket head long ball link M3 (2 uds)
1 x	ABS tube 18.0x16.0x1000 mm
1 x	Spannlack 1000 ml
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Marker ties (20 pcs)
1 x	MPX PCB "4 Pins", 5 pieces
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Connectors MPX black male
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Fuel bottle 500 ccm
1 x	Horn mando small (2 pcs)
1 x	Horn mando long (2 pcs)
2 x	Small aluminium horn blue (2pcs)
2 x	Horn 20x28,5 mm (2 pcs)
1 x	Xplorer3 anemometro
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Long horn 50x26
1 x	Control horn long w/ball
1 x	Short adjustable control horn 3x24
2 x	Glow starter with charger 230v
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	XT-60 connector (male)
2 x	Soldering PCBs 8pin, 5 pieces
2 x	Conector FUTABA Servo female (10 pcs)
1 x	Conector XT-30 (macho)
1 x	MR30 connector female
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Conector XT-30 (hembra)
1 x	Straightened threaded rod M3 - 1m
1 x	XH male balance (8S) connector (2 pcs)
1 x	Soporte carbono MR30 (2 pcs)
1 x
1 x	Straightened rod Ø 4.5 mm x 1000 mm
2 x	Conector JR Servo female (10 pcs)
1 x	Connectors MPX male (PIN double)
1 x	Wing conexion 2 servos JR/Graupner 50 cm
1 x	30 cm MULTIPLEX female connector
2 x	Connectors MPX female (PIN double)
1 x	Magnetic Connect locking system
1 x	MPX screwable clips (4 pcs)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	152x46 Ø6.0 mm aluminium core wheel
1 x	1/7 Pilot "Japanese"
1 x	10 mm gas motor standoff
1 x	1/10 Pilot "Jimmy"
1 x	Aluminium ignition bad (red)
1 x	Ball joint long
1 x	LA500 rotor head shaft
1 x	Battery plate
1 x	Grub screw M3x3 shouldered (2 pcs)
1 x	Head lower part New
2 x	Oracover GREY Seafire Sea 2m
1 x	Screwdriver for Torx® TX6
1 x	OS 37 SZ-H, Crankshaft
1 x	Protector Connector Dean-T (1 pair)
1 x	Protector Connector MPX (1 pair)
1 x	Conector JR Servo female (50 pcs)
1 x	MPX PCB "Gender-Changer (5 pcs)
1 x	110x55 mm SLH KOVO wheel
1 x	11 mm Rubber pads (14 pcs)
1 x	15 mm gas motor standoff
1 x	Oratex Yellow Cub 10 m
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	aluminium servo arm V1-JR 1,0 inch M2
1 x	Pilot LA 500
1 x	LA500 rotor head core
1 x	Washer 2.2×4
1 x	Head upper part
1 x	Head runner
1 x	LA500 Autogyro
1 x	Motor wall
1 x	Blades 330mm
1 x	LA500 nose
1 x	Cierva C30 simulated motor
1 x	Autogyro Cierva C30 Spain
1 x	Head lower part
1 x	Micro Tarjeta SD Rapid Rush 16 GB
1 x	Dean "T" - Futaba Adapter
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	12V Car Adapter
1 x	Silicone 0,35 qmm servos wire Graupner(100 m)
1 x	Fan for A60
1 x	OS 37 SZ-H, Bulon piston
1 x	8 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Screwdriver for Hexagon 1,5mm
1 x	Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Propadapter for motor A60-V2
1 x	Compact Pitts Muffler OS MAX.35.40 FP
1 x	Rocket D3-P
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	Conector MT-60 (pair)
1 x	Mounting frame MPX male connector
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Connectors MPX male
1 x	Conector JR Servo female (10 pcs)

2,713.19EUR