1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Ferrita 17x10x6.5 mm
1 x Ferrita 14x8x5.5 mm
3 x Fixed launching hook
2 x Towing hook <3m
1 x SERVO HOLDER
2 x LOWER TOW HOOK
1 x Quicklock washer 3.5 mm (10 pcs)
1 x Spray YELLOW Inca Lexan 150ml
2 x Quicklock washer 1 mm (10 pcs)
2 x Plasti Dip Liquid Tape 429 ml orange
1 x 1000 ml sealer (DOPE)
1 x Aluminium wide washer M3 blue (4 pcs)
2 x Partall paste 650 g
1 x Spray EC Red 400ml
2 x Hobbylite Filler, Balsa colour
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Lock washer 3.2 mm (20 pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Nitroverdu 500 ml
1 x Release wax 250ml
1 x Spring lock washer 3.1 mm (20 pcs)
1 x Quicklock washer 4 mm (10 pcs)
2 x Flat washer 2.7 mm (20 uds)pcs)
1 x Quicklock washer 1.5 mm (10 pcs)
1 x 20 g tin paste
1 x Quicklock washer 2 mm (10 pcs)
1 x PARTALL® Hi-Temp Wax, 340 g
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x Quicklock washer 3 mm (10 pcs)
2 x Jeti Black cap
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x ABS tube 5.0x4.0x1000 mm
1 x Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x Liston HAYA 10 x 10 x 1000 mm
1 x BALSA triangular 6x6x1000 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Trailing edge BALSA 35x8x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x Tow hook for tug
1 x Towing hook
1 x Pan Head Screw M2x8 PH countersunk head
1 x Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
1 x Pan Head Screw M2x6 PH
1 x Tapping Screw M2.9x13 (10 pcs)
1 x Circlik for shaft 3.2 mm (10 pcs)
1 x Lock nut aluminium M2.5 (4 pcs)
1 x TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible
1 x Pan Head Screw M1,6x6 (10 pcs)
1 x Screw M2x6 (10 pcs)
1 x Screw M2.5x5 (10 pcs)
1 x Screw M4x30 (10 pcs)
1 x DJI FPV Combo
1 x Screw M2.5x10 (10 pcs)
1 x Lock nut M3 (10 pcs)
1 x Presto SF Light Filler styrene-free (420 g)
1 x Tornillo cabeza boton M4x12 mm (5 pcs)
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x Spray adhesive AEROFIX 2
1 x Screw M3x30 (10 pcs)
1 x Socket Screw M3x9 mm
1 x Lock nut M5 (10 pcs)
1 x Lock nut M2 (20 pcs)
1 x Servo M2x7/16 screw (4 pcs)
1 x Spray adhesive INFUTAC (Clear) 500 ml
2 x Solvent Plasti Dip 1000 ml
1 x Aluminium M2x12 mm screw (4 pcs)
1 x Towing hook
1 x Spannlack 1000 ml
1 x Spray Graphit 33
1 x Motor mount EDGE 540 48"
1 x Nose OPTIMA 2.200 mm (Elec or Glider)
1 x Program 5v SIO RS 232
1 x Servo Controller Fibra optica
1 x Servo HITEC HS-311
1 x Servo lock HS-80/81/82/85 (2 pcs)
1 x Servo HITEC HS-225 MG
1 x Servo HS-5565MH High Voltage
1 x Servo HITEC HS-225 BB
1 x Servo HITEC HS-5475 HB Digi
1 x Red aluminium servo arm V2-Futaba 17 mm iM2
1 x Red aluminium servo arm V2-Futaba 1,75" inch M3
1 x Red aluminium servo arm V3-Futaba 3,5inch
1 x Red aluminium servo arm V3-Futaba 3-3,5inch
1 x Blue aluminium servo arm V1-Hitec 1,25" inch M3
1 x Battery RX JETI LiIon RB 2600 7.2v
1 x Horn with ball 40x30
2 x 6 mm M3 variable inclined horn
1 x Brass control horn M4 short for wire (4 pcs)
1 x Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x Adjustable brass horn threaded M3
1 x Horn micro type4 Ø 0,5 (2 pcs)
1 x 6 mm red aluminium threaded horn with patella
1 x Horn F3A de Titanium 16 mm (2 units)
1 x Adjustable launching hook
1 x PARKMASTER PRO Kit + (RR)
1 x POWER PEAK D7 EQ-BID 12V/230V-Duo Charger
1 x Plasti Dip Liquid Tape 429 ml black
1 x Plasti Dip Liquid Tape 429 ml black
1 x Universal Colour Paste deep black 50 g
1 x 50N turbine start protection tube
1 x 
1 x CHALLENGER Indoor
1 x LENTUS RR 3.000mm MULTIPLEX
1 x Arnes cruzado Confort de Luxe PROFI
1 x MULTIPLEX ALUMINUM CASE "M-LINK"
1 x EASYGLIDER 4 RR
1 x MULTIPLEX - TUNING SPINNER (67MM) FOR MULTIPLEX FUNRACER
1 x LENTUS Multiplex Fundas alas
1 x Support hands Issuer PROFI TX
1 x Red aluminium servo arm V1-Futaba 17 mm M2
1 x Cierva C30 spanish decoration Stickers
1 x Motor mount VANQUIST 48" F3A
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x Red aluminium servo arm V1-Futaba 20 mm M2
1 x LiPo Storage Box Type "BIG"
1 x Servo HITEC HS-82 MG
1 x Servo HS-5765MH High Voltage
1 x Gear set HITEC HS-225
1 x OSD Telemetry sensor
1 x EasyFLY Addon
1 x VIPER JET G2 Esq. 2 White/Red
1 x Grub screw M3x3 shouldered (2 pcs)
1 x VIPER JET G2 Esq. 3 Orange/Black
1 x Servo Fork
1 x Propeller POWER-PROP 7x7
1 x Blades 330mm
1 x Telemetria XYCOY adapter
1 x Wheel keeper washer
1 x Motor wall
1 x Metalic nose for PROJETI
1 x EXTRA 330SC-E 95" Orange/Blue/White
1 x Head core
1 x Cierva C30 Elevator
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Blind nut M5 (4 pcs)
1 x Powerset FunJet 2 with Vectorcontrol unit
1 x Extractor piñones 2.3/3.2 mm
1 x Servo HITEC HS-645 MG
1 x Servo HITEC HS-7115 TH
1 x Servo HITEC HS-785 HB
1 x Gear set HITEC D645 MW
1 x Gear set HITEC HS-311/322/325BB
1 x Servo HITEC HS-7985 High Torque Metal Gear Coreless Servo
1 x Gear set HITEC HS-125MG/5125MG
1 x Servo HITEC HS-65 MG
1 x Gear set HITEC HS-645MG/5645MG/5685MH
1 x Gear set HITEC HS-7950TH
1 x Servo HITEC HS-70 MG
1 x Rotorhead pushrod
1 x Servo HITEC HS-85 BB
1 x Gear carbonite set HITEC HS-6965
1 x Servo HITEC HSB-9380TH
1 x Servo HITEC HS-77 BB Low Profile
1 x Servo HITEC HS-85 MG
1 x Servo HS-7980TH digi high voltage ultra torque
1 x Servo HITEC HS-7950TH Ultra Torque HV Coreless Titanium Gear Ser
1 x Servo HITEC HS-5805 MG Digi
1 x Servo HITEC HS-7245MH
1 x Servo HITEC HSB-9370TH
1 x Servo HITEC HS-7955 TG Coreless Digi
1 x Gear set HITEC HS-55
1 x Set Micro-horns HS-60/81/85
1 x Servo HITEC HS-7975 TG
1 x Servo HITEC HS-7954 SH Digital High
1 x Screws set for Hitec MG arms servo
1 x Gear set HITEC HS-85
1 x Servo HITEC HS-635HB Carbonite
1 x Servo HITEC HS-81
1 x Servo HITEC HS-75BB Retract
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x Battery voltage telemetry
1 x Small adjustable aluminium control horn with bearing 2,8x15
1 x 6 mm blue aluminium threaded horn with patella
1 x Brass control horn M2 large for wire (2pcs)
1 x Extra-long adjustable aluminium control horn 2,8x34
1 x Horn DU-BRO 1/2 (2 pcs)
1 x 5 mm M2 variable inclined horn
1 x Horn 5/20 with M2 Bearing
1 x Horn 6/27 with M3 Bearing
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x Brass control horn M4 short for wire (10pcs)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Cable with accesories
11,809.39EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies