Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Opto Gas Engine Kill Switch temporarily out of stock	Propeller MENZ-S 17x10 temporarily out of stock	Propeller MENZ-S 18x12 temporarily out of stock
Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	XT-60 connector (female) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Regulador Hobbywing Platinum 260A HV SBEC V5
520.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

3 x	Truck-trailer for gliders 720 x 239 mm
1 x	Medidor ángulos y/o incidencias
3 x	Propeller balancer
3 x	Angle measurer
3 x	Field folding model stand
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
3 x	ABS I Strip 10x5x1000 mm
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
2 x	Angle of incidence meter
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
3 x	Field folding model stand SebArt
2 x	ABS tube 9.0x7.0x1000 mm
1 x	Round Rod 5,0x1000 mm
2 x	Truck-trailer for gliders 720 x 285 mm
1 x	ABS tube 4.0x3.0x1000 mm
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	ABS tube 9.0x8.0x1000 mm
3 x	Strip ABS 2.0x8.0x1000 mm
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
2 x	WingFix ULTRA Black Edition
2 x	Strip ABS 2.0x3.0x1000 mm
1 x	Round Rod 3,0x1000 mm
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
3 x	ABS Strip 1.0x3.0x1000 mm
1 x	Strip 2,0x2,0x330 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	ABS tube 6.0x5.0x1000 mm
2 x	ABS tube 8.0x7.0x1000 mm
1 x	ABS tube 5.0x4.0x156 mm
2 x	Strip ABS 2.0x10.0x1000 mm
3 x	Strip 1,5x1,5x330 mm
2 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ABS tube 7.0x6.0x1000 mm
1 x	ABS tube 6.0x4.0x1000 mm
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	ABS tube 2.0x1.0x1000 mm
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	Round Rod 1,5x1000 mm
1 x	Round Rod 1,25x1000 mm
2 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	ABS Strip 1.5x3.0x1000 mm
2 x	ABS tube 8.0x6.0x1000 mm
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Round Rod 1,0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
3 x	Surface Indicator Gauge Small
2 x	Extension 15 cm (Futaba)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
2 x	Extension silicon 10 cm (Futaba)
2 x	Futaba Female 40 cm extension
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Premium servo extension 75cm
2 x	Extension 90 cm (Futaba)
1 x	Extension 7.5 cm
1 x	Futaba male 40 cm extension
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	200 mm extensión servo HITEC/JR
1 x	Extension silicon 10 cm (Graupner)
2 x	Prolongador S-Bus JR/JR 10cm
2 x	Extension silicon 30 cm male (Graupner)
3 x	Premium servo extension 25cm
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
3 x	Propeller balancer
1 x	Horn for flap control (1 pcs)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Profile ABS half cane 4x1000 mm
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Glases Moritz
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	Fiberglass tube 6/4x1000mm
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Round Rod 6,0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
2 x	ABS Strip 1.5x4.0x1000 mm
1 x	Strip 3,5x1,75x330 mm
1 x	Extension silicon 30 cm female (Graupner)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Strip 2,5x1,25x330 mm
1 x	ABS tube 4.0x2.0x1000 mm
1 x	Thixotropic agent tin/ 15 g (approx. 350ml)
1 x	Engine mounts for .09 - .19 engine
1 x	Thixotropic agent TM 100, tin/ 75 g (approx. 1 l)
1 x	Conector MT-60 (pair)
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Ciano KAVAN Thin 20g
1 x	XT60 Connector with Holder Male 2pcs
1 x	Connectors banna oro 4 mm (M/F)
1 x	Conector BEC male (10 pcs)
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	Charger SKY RC e680
1 x	Fuel bottle 500 ccm
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Propeller RABOESCH M4 45 mm (3 Blades pr) (Right hydropropeller)
1 x	JETCENTRAL ECU LIFE BATTERY 3800 MAH
1 x	Spark Ceramic JETCENTRAL
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller)
1 x	Round Rod 2,0x1000 mm

2,332.06EUR