Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

PT-22 Ryan Recruit 2290 mm (SEAGULL)
560.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Conector CAN 15
1 x	Alambre de cobre esmaltado Ø0,2 mm (5 m)
1 x	Cable carga bateria transmisor Graupner 2x0,5 qmm (50 cm)
1 x	Adaptador JST-XH
1 x	Alambre de cobre esmaltado en negro Ø0,2 mm (5 m)
1 x	Conector Sub-D 2+5 Hembra
1 x	CM-3
1 x	Circlick seguridad
1 x	Adaptador 4 LiPos XH>EH
1 x	Adaptador 5 LiPos XH>EH
1 x	Cable "Y" carga 4 mm (2 IN-1 OUT)
1 x	DPS Interruptor JR/JR
1 x	BEC 3A FOXY
1 x	Cable BEC 30 cm (macho)
2 x	UBEC 6A KAVAN
2 x	CC 05
1 x	Cable carga emisora GRAUPNER
1 x	APM2,6 Power module con BEC 5,3 V DC
1 x	CC 03
1 x	Acoplador M2 (10 uds)
2 x	Acople ALU M2,5 Ø 4 (2 uds)
2 x	Acoplador "Z" Ø 1.8 (2 uds)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Ball link aluminio M3 V1 rojo (10 pcs)
2 x	Acoplador M3 (10 uds)
1 x	Acoplador "Z" Ø 1 (2 uds)
1 x	Ball link ALU M2,5/2 con rodamiento (1 pcs)
1 x	Ball link Aluminio M3 (2 pcs)
2 x	Acoplador M2,5 Ø 2 mm (10 pcs)
1 x	Acoplador "Z" Ø 2 (2 uds)
1 x	Clevis con trasmisión M3
1 x	Acople ALU M2,5 Ø 6 (2 uds)
1 x	Ball link ALU M2/2 con rodamiento (1 pcs)
1 x	Acople ALU M3 Ø 5 (2 uds)
2 x	Ball link aluminio M3 V1 (10 pcs)
2 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Kwik link AL M3 con Clip (2 pcs)
3 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Ball link latón BS M3 V1 (10 pcs)
1 x	Ball link ALU M3/2 con rodamiento (1 pcs)
1 x	Prolongador macho TP 4/5S
1 x	Prolongador 5 lipos conector JST/C
1 x	MAX BEC
1 x	SBEC Jeti
1 x	Interruptor SWTU2
1 x	Multi-adaptador equilibradores JST - TP
1 x	Prolongador 5 lipos conector JST/C - JST
1 x	Interruptor Magnetico MULTIPLEX
1 x	Interruptor RX/Batería
1 x	Interruptor OPTO Gas Engine
1 x	Multi-adaptador equilibradores JST/C - TP
1 x	Bayoneta aluminio ø30×1 mm x 1m
1 x	Bayoneta: Fibra de vidrio/Carbono (26.5/25 x 25/23) x 1000 mm
1 x	Bayoneta aluminio/strongal D25 mm/1 m
1 x	Servo NARO Max Std
2 x	e-Looger V3
2 x	Bateria arranque incl. compresor inflado
1 x	Alicate para hacer "Z"
1 x	Bascula precisión 0.1- 600 g
1 x	Motorización Trike XL (motor+regulador+helice)
1 x	Paramotor Trike XL
1 x	Perfil de ABS "L" 10,0x10,0x1000 mm
1 x	Conectores para alas del Fox MDM1
1 x	Varilla carbono 0.8 mmx1000 mm
1 x	Varilla carbono 0.5 mmx1000 mm
1 x	Varilla carbono plana 1000x6.0x0.8 mm
1 x	Cable carga bateria transmisor Multiplex 2x0,5 qmm (50 cm)
1 x	Adaptador 2 LiPos XH>EH
1 x	Soporte FUEL DOT V3
1 x	Fournier RF-4D
1 x	Terminales riostras M2 (10 uds)
1 x	Polea de bronce 6/1,5 (2 pcs)
2 x	Pull-Pull set completo con horns y brazos de servo en CF e hilo
1 x	Terminales riostras M3 (10 uds)
1 x	Tensor de riostras M1,6x17/27 (2pcs)
1 x	Porta Kwik link M4 4 mm (2 pcs)
2 x	Pull-Pull set completo acero inox. 4 m (max 20 kg)
1 x	LO 100 ARC 3.3m,cabina
1 x	Acople ALU M3 Ø 4 (2 uds)
1 x	Fox 4000 mm Airworld,marco cabina
1 x	Crimping sleeves para cables de 1.1 mm (10 pcs)
1 x	Porta Kwik link M3 3 mm (2 pcs)
1 x	Cabina Astra
1 x	Fox MDM 1 4000 mm DeLuxe,Set instrumentos frontales scale FOX
2 x	Acople ALU M2,5 Ø 3 (2 uds)
2 x	Bayoneta aluminio/strongal D12 mm/0,5 m
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	USB cable ALTIS
1 x	Gracia Maxi ARF, fundas (Top Model)
1 x	Servo BLS-M55B 61.2kg
1 x	Brazo servo doble aluminio JR/Graupner 40 mm M3 F3A gold
1 x	Palas de autogiro de 330 mm
1 x	Rueda KOVO SLH 120x60 mm
2 x	Chispometro con cargador
1 x	Excavadora 966G II without electrics, without hydrauli
1 x	Excavadora 966G II Kit completo
1 x	Helice Carbono 18x19
1 x	Servo HITEC HS-225 MG
1 x	Servo FUTABA SBL 471 SV
1 x	Brazo servo aluminio 15-10 mm Futaba/MKS/Savox
1 x	Servo HITEC D954 TW
1 x	Brazo servo FUTABA long (8 pcs) DUBRO
1 x	Piñones servo D 200 BX
2 x	Brazo servo aluminio V1-Futaba 17 mm M2 rojo
1 x	Caja servo BLS-152 / 172
1 x	Brazo servo doble aluminio V3-Hitec 3-3,5" azul
1 x	Servo HITEC D131 MW nano
1 x	Brazo servo "L" 65x49 mm (2 pcs)
1 x	Motor OS 3820-1200 eléctrico
1 x	Motor OS 3805-1200 eléctrico
1 x	Adaptador 4,0 mm M8 para cono 40 mm hélice pleg.
2 x	Abrazadera 2.5x100 (20 uds)
1 x	Adaptador 2,3 mm M5 para cono 30 mm hélice fija.
1 x	Adaptador 4,0 mm M6 para cono 30 mm hélice pleg.
1 x	Adaptador 3,0 mm M5 para cono 30 mm hélice fija.
1 x	Adaptador 3,0 mm M6 para cono 40 mm hélice fija.
1 x	FesEx-Uni6 System
1 x	FesEx-Uni8 System
1 x	Adaptador 3,2 mm M6 para cono 40 mm hélice fija.
1 x	Acoplador para cable M4 (10 pcs)
1 x	Adaptador de hélice 2,3 mm M5
1 x	Adaptador 3,2 mm M5 para cono 30 mm hélice fija.
1 x	Adaptador de hélice 3 mm M5 (largo)
1 x	Acople ALU Izda. M3 Ø 4 (2 uds)
1 x	Acople ALU M2 Ø 3 (2 uds)
1 x	Acoplador M2,5 Ø 3 mm (10 pcs)
1 x	Acople ALU Izda. M2,5 Ø 4 (2 uds)
1 x	Sistema para cables con tensor (negro)
1 x	Tensor de riostras M1,6x20/30 (2pcs)
1 x	Pipa 3D F-16 Scale 1/6
1 x	Interruptor SPS 70v 60/120A
1 x	X-RAY Micro QR (Dirección)
1 x	Eje para motor Hacker A60-20/22/24S (120 mm)
1 x	Adaptador para motor A50
1 x	Helice XOAR 20x10 Electrica
1 x	Aero frenos eléctricos para veleros 300 mm (2 pcs)
1 x	Carro remolque JEEMO
1 x	Hélice 9x4,7 SlowFlyer
1 x	Reductora IPS 150 DX2BB-BXCS 7:1
1 x	Reductora IPS 150 DX2BB-FXCS 11,8:1
1 x	Helice MEJZLIK 9,5x3 SF Carbón Indoor
1 x	Bateria DJI Mini 2 2250 mAh
1 x	Soporte turbina Xicoy X45 Jeemo
1 x	Batería LiPo GENS 5000 mAh 4S 14,8V 40C (Gens Ace Hard Case)
1 x	Batería LiPo GENS 2700 mAh 3S 11.1v Pack Emisora (Gens Ace)
1 x	LiPo TopFuel ECO-X 5000 mAh 2s 35C MTAG
1 x	Helice Carbono 14x8
1 x	Receptor DUPLEX R10 REX Assit
1 x	Listón OBECHI 2,0x3,0x1000 mm
1 x	Helice Carbono 17x18
1 x	Helice Carbono 18x16
1 x	Helice Carbono 18,5x12
1 x	Lipo RAY 2200 mAh 2s 7.4v 30C
1 x	Brazo servo aluminio V2-Hitec 1,25" M3 azul
1 x	Brazo servo aluminio V1-JR 1,25" M3 oro
1 x	Hélice MEJLIK 22x10
1 x	Hélice MEJLIK 30x12
1 x	Brazo servo aluminio V2-JR 1,0" M3 gold
1 x	FOX 2.300 mm V2 PNP (FMS)
1 x	Eje para motor Hacker A60 L V4
1 x	Fan trasero A60
1 x	Eje para motor Hacker A60 L (140 mm)
1 x	Condensador 820 Addcap
1 x	Destornillador Torx® TX8
1 x	Eje para motor Hacker A60-XS-V2 (112,5 mm)
1 x	Prolongador 2/3 lipos conector JST - JST/C
1 x	T-Motor U7-V2.0 Kv420
1 x	LiPo TopFuel 500 mAh 2S 20C ECO-RX
1 x	Batería LiPo GENS 5000 mAh 2S 7,4V 60C (Gens Ace)
1 x	LiPo TopFuel 7500 mAh 6S 35C-ECO-X MTAG
1 x	Tren retráctil neumático tripata (Jet Legend)
1 x	LiPo TopFuel ECO-X 3800mAh 2s 20C MTAG
1 x	LiPo TopFuel 1300 mAh 2S 25C ECO-X
1 x	LiPo TopFuel 5000 mAh 6S 20C-ECO-X
1 x	LiPo TopFuel X 5000 mAh 6S 35C
1 x	Bayoneta aluminio ø35×1.5 mm x 500mm
1 x	Motor OS 46 AX II
1 x	Lipo FOXY G3 4500 mAh 11.1v 40/80C
1 x	Chispometro glow 1.3 Ah
1 x	Recambio lonas Hovercraft
1 x	Hélice MEJLIK 21x8 CFK
1 x	Brazo servo aluminio V2-JR 1,5" M3 gold
1 x	Brazo servo aluminio V2-Hitec 2,0" M3 azul
1 x	Brazo servo aluminio V3-Futaba 1,0" rojo
1 x	Brazo servo aluminio V1-JR 1,0" M2 dorado
1 x	Motor COMPACT drive 26/45-20 DL=175
1 x	Horn de mando largo con rodamiento (2 ud)
1 x	Epoxy 5 min. 200g
1 x	Bancada servo tandem 4,5-5" para 2 servos
1 x	Brazo servo aluminio V1-Futaba 23 mm M2 rojo
1 x	Hélice MEJLIK 29x10S
1 x	Brazo servo aluminio V1-Futaba 1,0" M2 rojo
1 x	Hélice MEJLIK 18x8 CFK
1 x	Hélice MEJLIK 27x12 TH
1 x	Hélice MEJLIK 23x8 CFK
1 x	Brazo de servo 50 mm con rodamiento (2 pcs)
1 x	Circlick para eje 3.2 mm (10 pcs)
1 x	Arandela 1.7 mm (20 pcs)

16,656.32EUR