1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
4 x Brazo aluminio ext. carburador (rojo)
2 x Trompetilla admisión carburador 90D-L (rojo)
2 x Trompetilla admisión carburador WALBRO 20-80cc (azul)
3 x Pinza de cierre tubo 6 mm
3 x Brazo aluminio ext. carburador
1 x Carburador para DLE 55
2 x Trompetilla admisión carburador DA70 hasta 190 Engine(rojo)
4 x Carburador WALBRO para EME 55 cc
2 x Caja de válvulas DA 50-R
2 x Carburador completo para DA 85 / DA 100 / DA 100 L
2 x Trompetilla admisión carburador WALBRO 20-80cc (rojo)
5 x Carburador para SAITO FG-36
2 x Carburador WALBRO para MVVS 26/30/35/40 cc
1 x Trompetilla admisión carburador 90S-M (rojo)
2 x Chaqueta Hispano Aviación
1 x Gorra Hispano Aviación
1 x Adaptador para motor A60-V2
1 x Perforador hélices para DLE111 y DA85-150
2 x Galgas motor 0.05 - 1.0 mm
1 x Perforador hélices para EME35 y DLE35
2 x Bancada Aluminio set radial motor A60-V2
1 x Tacometro mini encendidos RCEXL
2 x Tuercas autoblocantes M6 montaje motor gas
1 x Adaptador para motor A50
1 x Perforador hélices DLE170
1 x Rodamientos para motor A60-V2
1 x Rueda KOVO SLH 120x60 mm
1 x Turbina KINGTECH K55G4
1 x Adaptador (GP/KO hasta 4S) para CellPRO 4S
1 x Fuente alimentacion NT 40 Amp.
1 x Rueda dentada 9724/09 para ZG 45
1 x Eje ruedas Ø 6 mm (2 uds)
1 x Rueda FEMA 178 mm / 8 mm
1 x Rueda FEMA 112 mm / 6 mm
1 x HOPPER tank Digitech 250 ml (Festo nipples 6 mm)
1 x Chaveta DLE 85/111/120
1 x Conversión DLE 111 kit upgrade
1 x Líquido Humo AZUL Turbina 0,75 l
1 x Motor Advance 50-6
1 x Cargador Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x Cono de fibra BS ∅155 x 200 mm
1 x Eje ruedas Ø 8 mm (2 uds)
1 x Clevis con trasmisión M3
1 x Rueda FEMA 90 mm / 6 mm
1 x Soporte reenvio para freno retractil
1 x Adaptador para motores de aviones y barcos de 7,5-35cc
1 x Captador Encendido DLE 20/20RA/30/35RA/55/55RA
1 x Cono hélice fija 42 mm diámetro / eje 5,0 mm
1 x Carburador DLE 170
1 x Bancada para servo en Z
1 x Hélice MENZ-S 21x12
1 x Hélice MENZ-S 20x8
1 x Hélice MENZ-S 18x12
1 x Hélice MENZ-S 19x8 Tripala
1 x Hélice MENZ-S 15x6
1 x Hélice MENZ-S 17x8
1 x Hélice MENZ-S 16x10 Tripala
1 x Hélice POWER-PROP 7x7
2 x Guardabarros ruedas 140/165 mm
2 x Prisionero aluminio 5 mm Ø (4 uds)
2 x Rodamiento cigüeñal SAITO 120/125/150/180/220 4T
1 x Tren de cola (clase 60-120)
1 x Rueda de cola para modelos de 8 a 12 kg
7,046.71EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas