| 1 x | |
| 1 x | LUCAS pilot ARTF |
| 1 x | Cap Hispano Aviación |
| 1 x | Vest clothes Hispano Aviación |
| 2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 2 x | Axle for AXI 2808/xx motors |
| 1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 2 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 2 x | SE Ring 360 mm (2 pcs) |
| 1 x | ABS tube 5.0x4.0x156 mm |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
| 1 x | SE Ring 350 mm (2 pcs) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
| 1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
| 1 x | Axle for AXI 5325/xx motors |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
| 1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
| 1 x | Axle for AXI 2814/xx motors |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 1 x | Digital Air Speed Sensor And Pitot Tube Set |
| 1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Threaded coupler M2 (10 uds) |
| 1 x | 20x200 mm battery rings |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 2 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | CC 01 |
| 1 x | Swift 5050 mm (Airwold) |
| 1 x | Connectors banna oro 0,8 mm (M/F) |
| 1 x | Carbon fiber rod 1.5 mm x 2000 mm |
| 1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | EVP Unit for AXI2208/xx and 2212/xx |
| 1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
| 1 x | FesEx-Uni8 System |
| 2 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | X-RAY Micro QR |
| 1 x | Joint with bearing M2 22x5,5 |
| 1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
| 1 x | Conector MR-60 (pareja) |
| 1 x | X-RAY Micro QR (Fuselage with canopy) |
| 1 x | Air filter MOKI |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | DPSI Ampere battery backer |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | AXI 2814/10 V2 Long |
| 1 x | Ball link M3 (10 pcs, flat ball) |
| 1 x | Bungee HLG Premium |
| 1 x | Moki Pushrod S250 (1 pcs) |
| 1 x | Connectors banna gold 5,5 mm (M/F) |
| 1 x | Set stickers JEEMO "Andy" |
| 1 x | AXI 2826/8 V2 Long |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
| 1 x | ASK 21 6.8m |
| 1 x | Round Rod 1,25x1000 mm |
| 1 x | DG-303 ACRO 3750 mm, canopy |
| 1 x | Connectors banna oro 3,5 mm (M/F) |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Ball link M2 (10 pcs) |
| 1 x | BEC 3A FOXY |
| 1 x | AXI 2826/12 V2 Long |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | Servo M2x9/16 screw (4 pcs) |
| 1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | Blades 330mm |
| 1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 2 x | 11 mm Rubber pads (14 pcs) |
| 1 x | Split pin 1x8 mm (10 uds) |
| 1 x | Cable grommet 9.5 mm (4 uds) |
| 1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
| 1 x | Wing bolts M6 Steel screw Red (2 pcs) |
| 1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
| 1 x | Allen wheel collar M4x6 |
| 1 x | Turnbuckle M3 33x49 (2pcs) |
| 1 x | Turnbuckle M1,6x17/27 (2pcs) |
| 1 x | wire tensioner (silver) |
| 1 x | Pulley brass 8/2 (2 pcs) |
| 1 x | Round Rod 1.0x3.5 cm |
| 1 x | Switch Cap M (silver) |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | Lunak ARF 2000 mm Yellow (Hacker Model) |
| 1 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | FOD Screen K140G/K180G/K210G |
| 1 x | Servo TOPMODEL DS9010 T |
| 1 x | 13 mm wing servo holder |
| 1 x | Fod Guard 94x32 mm |
| 1 x | Fod Guard 94x34 mm |
| 1 x | Servo TOPMODEL STANDARD S3217 |
| 1 x | JETCAT ADITIVO ANTIESTATIC 120ml |
| 1 x | Smokelance |
| 1 x | Telemetry SPEKTRUM |
| 1 x | 11 mm wing servo holder |
| 1 x | Pipe Jet REVEL titanio/aluminio |
| 1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Tip wing protector 28x10x12 (2 pcs) |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | Set clevis for pull-pull (TY13233 & TY13234) |
| 1 x | Wheel collar 3 mm Ø (4 uds) |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Allen wheel collar M4x4 |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | Pushrod octagone 4/3 with coupler M3 |
| 1 x | Pushrod greyline 4/3 with coupler M3 |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | Wing bolts M3 Steel screw Red (2 pcs) |
| 1 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Threaded coupler M3 (10 uds) |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | Retract undercarriage for gliders up to 3,5 Kg |
| 1 x | Allen wheel collar M3x3 |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | Wheel collar 5 mm Ø (4 uds) |
| 1 x | Rubber bushing with bracket "B" type (2 pcs) |
| 1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | 28x5 mm wires output (2 pcs) |
| 1 x | Snap long M2 (10 uds) |
| 1 x | 250 mm / 16 mm Airbrakes |
| 1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | 140 mm rods + T patellas set for direction control |
| 1 x | Pushrod octagone 3/2 with coupler M2 |
| 1 x | Canopy Latch |
| 1 x | Landing gear frontal support 25x32x16 |
| 1 x | Snap short M2 (10 uds) |
| 1 x | Pushrod octagone 4/3 |
| 1 x | 4 mm M3 red control terminal (4 pcs) |
| 1 x | Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C |
| 1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
| 1 x | Decorative caps, multicoloured |
| 1 x | Turnbuckle M1,6x20/30 (2pcs) |
| 1 x | Porta Kwik link M4 4 mm (2 pcs) |
| 1 x | PIX Hawk with accesories |
| 1 x | Pulley brass 6/1,5 (2 pcs) |
| 1 x | Threaded coupler M2,5 (10 pcs) |
| 1 x | Axle for AXI 4120/xx motors |
| 1 x | Switch Cap M (blue) |
| 1 x | Tube Pitot to PIXHAWK |
| 1 x | Bearing 698-2Z for AXI 5330/xx |
| 1 x | TX-Tray V1 (L) (Black) |
| 1 x | Axle for AXI 4130 V2 motors |
| 1 x | Round Rod 2,0x1000 mm |
| 1 x | XT-60 connector (female) |
| 1 x | Red 3m5 mm connector holder |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Cinta Goldfix 1m |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | Strip 2,0x2,0x330 mm |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | Red 4 mm connector holder |
| 1 x | XH male balance (5S) connector (2 pcs) |
| 1 x | XT60 Connector with Holder Male 2pcs |
| 1 x | XH female balance (8S) connector (2 pcs) |
| 1 x | Soldering PCBs 8pin, 5 pieces |
| 1 x | Servo Connector Brackets (10 pcs) |
| 1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | XH female balance (4S) connector (2 pcs) |
 |
| 11,088.57EUR |
