Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Bateria LiPo GRE24 600 mAh 3.7v
12.25EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

2 x	Tubo ABS 5,0x3,0x1000 mm
3 x	Tubo aluminio (L 1000 mm, Ø7,0 mm, Ø6,1 mm)
2 x	Tubo ABS 12,0x10,0x1000 mm
2 x	Tubo ABS 9,0x8,0x1000 mm
2 x	Tubo ABS 3,0x1,0x1000 mm
2 x	Tubo ABS 10,0x8,0x1000 mm
1 x	Tubo ABS 7,0x6,0x1000 mm
3 x	Tubo ABS 4,0x3,0x1000 mm
1 x	Tubo ABS 8,0x7,0x1000 mm
2 x	Tubo aluminio (L 1000 mm, Ø3,0 mm, Ø2,1 mm)
3 x	Tubo ABS 6,0x5,0x1000 mm
2 x	Tubo ABS 8,0x6,0x1000 mm
1 x	Tubo ABS 6,0x4,0x1000 mm
2 x	Tubo ABS 4,0x2,0x1000 mm
1 x	Tubo ABS 5,0x4,0x1000 mm
2 x	Tubo ABS 3,0x2,0x1000 mm
2 x	Tubo ABS 20,0x18,0x1000 mm
1 x	Tubo carbono (L 1000 mm, Ø12 mm, Ø10 mm)
2 x	Tubo ABS 18,0x16,0x1000 mm
2 x	Tubo ABS 9,0x7,0x1000 mm
2 x	Tubo carbono (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Tubo carbono (L 1000 mm, Ø16 mm, Ø12 mm)
3 x	Tubo ABS 7,0x5,0x1000 mm
2 x	Tubo ABS 16,0x14,0x1000 mm
1 x	Tren aterrizaje Electrico "Black Edition" ULTIMATUM 3.0 (Electro
2 x	Turbina KINGTECH K320 G5
1 x	Conector MR-60 (pareja)
1 x	Adaptadores carga 6s JST-XH
1 x	Extension MPX-MPX 20 cm
2 x	SIMtransmitter 6 Modo 2
2 x	Simulador RealFlight RF-9 Interlink-X (con emisora)
1 x	Interface Jack Adapter IKARUS
1 x	EasyFLY Addon
1 x	Portaequipajes BIG-MALIBU XL 285x90x44 cm Gris
1 x	Disolvente Plasti Dip 1000 ml
1 x	Fibra carbono tela 160g/m2 127 cm x 10 m
2 x	Tubo ABS 3,0x2,0x330 mm
2 x	Tubo ABS 14,0x10,0x1000 mm
1 x	Prolongador 30 cm (Futaba)
1 x	Listón de HAYA redondo 3,0 x 1000 mm
1 x	Tubo aluminio (L 1000 mm, Ø4,0 mm, Ø3,1 mm)
1 x	Tubo carbono (L 1000 mm, Ø22 mm, Ø21 mm)
1 x	Tubo ABS 5,0x4,0x156 mm
1 x	Fibra carbono tela 245g/m2 127 cm x 10m
2 x	Pines alineamiento Ø 8 mm-2 pats (100 pares)
1 x	Film perforado 145 cm / 50 m
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 20m
1 x	AIREX® M060 lámina (amarilla) 1200x550x6,0 mm (5 pcs)
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
2 x	Bancada servo gancho
1 x	Prolong/Adap correa HITEC Aurora 9, JR y Spectrum (azul)
1 x	Prolongador Cable S-Bus
1 x	Prolong/Adap correa Futaba V
1 x	Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C
1 x	Cargador FUTABA SQN30W12P-08 220v
1 x	Maleta aluminio MULTIPLEX MLink
1 x	Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x	Prolong/Adap correa FF9-DX7-JR-Hitec
1 x	Capuchón decorativo interruptores TX
1 x	Capuchón M interruptor aluminio silver
1 x	Capuchón L interruptor aluminio azul
1 x	Capuchón M interruptor aluminio azul
1 x	Tapón antena V1 Futaba-JR (Plata)
1 x	Plancha carbono 550x350x4.0 mm ECOTECH
1 x	Cuña desmoldeo roja (5 pcs) [40x20mm]
1 x	Plancha carbono 700x550x0,5 mm
1 x	Plancha carbono 550x350x3.0 mm ECOTECH
1 x	Fibra de vidrio picada 3mm (200g)
1 x	Fibra de vidrio picada 3mm (1 Kg)
1 x	Fibra carbono tela 160g/m2 100 cm x 5 m
1 x	Plancha carbono 1000x500x2,0 mm ECOTECH
1 x	Cinta Roving carbono 20m
1 x	Tubo carbono (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Tubo carbono conico 3K 10x5x0.3 x 880mm
1 x	Fibra carbono tela 245g/m2 125 cm x 20 m
1 x	Plancha carbono 350x150x1.0 mm
1 x	Plancha carbono 350x150x5.0 mm
1 x	Interface Realflight Simulator
1 x	Cono Aluminio hélice fija 40 mm diámetro / eje 4,0 mm
1 x	Cono NUT M8x1,25
1 x	Cono NUT M5
1 x	Cono NUT 1/4x28
1 x	Arandela conica ancha alumino M4 Oro (4 pcs)
1 x	PowerBox Mobile Terminal
1 x	Arandela conica ancha alumino M4 Azul (4 pcs)
1 x	Ball link aluminio M3 V1 rojo (10 pcs)
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Cinta adhesiva impermeable, ancho 19 mm, largo 25 m
1 x	BULL MØ1 2.600mm ORANGE
1 x	Brazo servo aluminio V1-Futaba 1,5" M3 rojo
1 x	JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x	JEEMO Kit ARF Basic (2 color) - XTRALIGHT
1 x	Bancada servo tandem 4,5-5" para 2 servos
1 x	Ball link latón BS M3 V1 (10 pcs)
1 x	Brazo servo Aluminio 25T M3 KAVAN 6.5 / 19.6 mm
1 x	Bancada receptor (Azul)
1 x	Arandela conica alumino M3 verde (8 pcs)
1 x	Arandela conica ancha alumino M4 Negro (4 pcs)
1 x	Interruptor magnetico (PCB) DPSI
1 x	Pasa muros FESTO 4-4 mm
1 x	Cable silicona 0,25 mm² blanco (25 m)
1 x	Cable servos PVC 0,35 mm2 Graupner (100 m)
1 x	Cable Cargador FUTABA
1 x	Cable carga bateria transmisor Graupner 2x0,5 qmm (50 cm)
1 x	Cable servo 4 lineas PVC 0,25 mm2 JR/Graupner (5 m)
1 x	Tubo aluminio (L 1000 mm, Ø5,0 mm, Ø4,1 mm)
1 x	Tubo de latón (L 1000 mm, Ø6,0 mm, Ø5,2 mm)
1 x	Pistola para botes de pintura
1 x	Combo 4 pcs AXI 2204 Multicopter
1 x	Motor brushless 1806 - 2300 Kv Cuadricóptero
1 x	Conector FESTO M7 Quick 6mm 90º
1 x	Encendido GLOW 9C + accesorios
1 x	Conector FESTO 3-3mm
1 x	Encendido GLOW 5C + accesorios
1 x	Alambre cobre esmaltado 3 hilos trenzados rojo/negro/cobre Ø0,2
1 x	Cable servos silicona 0,14 mm2 Graupner (100 m)
1 x	Adaptador 4 LiPos XH>EH
1 x	Cable silicona 0,25 mm² negro (25 m)
1 x	Cable silicona "Y" 30 cm (Graupner)
1 x	Cable "Y" equilibrador 5S, 2x JST-XH / 1x JST-EH
1 x	VIPER JET 2.2m + Electric. Landing Gear Deco: 01 Red-Blac-kWhit
1 x	Cinta Goldfix 1m
1 x	Cinta autoadhesiva 13 mm x 16.80m; Diente 0.5 mm
1 x	Sistema cierre 350 mm con abrazadera (2 pcs)
1 x	Sistema cierre 200 mm con abrazadera (2 pcs)
1 x	Cinta autoadhesiva 10 mm x 12m; Diente 0.5 mm
1 x	Cinta fibra vidrio 38 mm
1 x	Sistema cierre 480 mm con abrazadera (2 pcs)
1 x	Bridas 1,66x71 / 0,07x2,8"mm (20 pcs)
1 x	Sistema cierre baterías 20x200 mm
1 x	Sistema cierre HACKER 300 mm con abrazadera (2 pcs)
1 x	Cinta autoadhesiva 26 mm x 16.80m; Diente 1.0 mm
1 x	Cinta alerones 1m x 10mm
1 x	Sistema cierre 360 mm con abrazadera (2 pcs)
1 x	Cinta fibra vidrio 50 mm
1 x	Sistema cierre 400 mm con abrazadera (2 pcs)
1 x	Tubo fiberglass 6.0 / 4.0 x 1000 mm
1 x	Tubo carbono (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	Tubo de latón (L 1000 mm, Ø3,0 mm, Ø2,1 mm)
1 x	Tubo de latón (L 1000 mm, Ø4,0 mm, Ø3,1 mm)
1 x	Tubo carbono (L 1000 mm, Ø0,7 mm, Ø0,3 mm)
1 x	Tubo de latón (L 1000 mm, Ø5,0 mm, Ø4,1 mm)
1 x	Tubo ABS 2,0x1,0x1000 mm
1 x	Conector "T" 6-6-6 mm tubo bomba vacio
1 x	Cable carga bateria transmisor Multiplex 2x0,5 qmm (50 cm)
1 x	Adhesivo Leds 2x2 ml
1 x	Resina Epoxy L-385 (1250 g)
1 x	Limpiador UN - CURE™ (30g)
1 x	Adaptador 3,0 mm M5 para cono 30 mm hélice fija.
1 x	Adaptador 3,0 mm M6 para cono 40 mm hélice fija.
1 x	Cono Aluminio hélice fija 30 mm diámetro / eje 3,2 mm
1 x	Thixotropic agente tin/15g (aprox. 350 ml)
1 x	UHU hart 35 g
1 x	Cianocrilato CA Gast 20g
1 x	Canula repuesto
1 x	Ciano INSTA - CURE™ (12g)
1 x	Adaptador 5,0 mm M6 para cono 40 mm hélice fija.
1 x	Adaptador 2,3 mm M5 para cono 30 mm hélice fija.
1 x	Adaptador 3,2 mm M6 para cono 40 mm hélice fija.
1 x	Conector FESTO "T" 4-4-4 mm
1 x	Acoplador Micro M2 Ø 1 mm (10 pcs)

28,157.67EUR