Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Hélice BIELA 28x12 3Bl (Tripala)
145.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Hélice POWER-PROP 14x9 Izda
1 x	Hélice POWER-PROP 13x9 Izda
1 x	Anemometro Xplorer2
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	Acople ALU M2 Ø 3 (2 uds)
2 x	Horn de mando 5/10 con rótula M2
2 x	Horn corto de latón M4 para cable (10 pcs)
1 x	Horn 16,5x20 mm (2 pcs)
2 x	Horn aluminio pequeño rojo (2pcs)
3 x	Horn de mando carbono 20 mm
1 x	Horn aluminio pequeño amarillo (2pcs)
1 x	Horn aluminio pequeño azul (2pcs)
1 x	Acople ALU M2,5 Ø 4 (2 uds)
2 x	Horn 20x28,5 mm (2 pcs)
2 x	Horn con ball 55x40
2 x	Horn de mando 6/27 con rótula M3
1 x	Acople ALU Izda. M3 Ø 4 (2 uds)
1 x	Piloto JAN 1/4 Veleros
1 x	Cargas cohete B4-0 (6 pcs)
1 x	Alicate para hacer "Z"
1 x	Adaptador Dean "T" - Futaba
1 x	Arandela de bloqueo 2 mm (10 pcs)
1 x	Bisagra de aluminio tipo PIN 4,5x70 mm desmontable (2 pcs)
1 x	Rueda KOVO espuma dura 73x24 mm (2 pcs)
1 x	Rueda 76x23 centro aluminio Ø3.5 mm
1 x	Rueda 102x26 centro aluminio Ø6.0 mm
1 x	Amortiguador FEMA 400 Newtons
2 x	Horn de mando corto con rodamiento (2 pcs)
1 x	JetiBOX
1 x	Brazo servo Aluminio 25T M3 KAVAN 6.5 / 19.6 mm
1 x	Cinta adhesiva impermeable, ancho 19 mm, largo 25 m
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	Horn aluminio negro LH largo L31xH30 (2pcs)
2 x	Horn largo 50x26
1 x	Horn de mando largo con rodamiento (2 ud)
2 x	Horn corto de latón M3 para cable (2 pcs)
1 x	Horn de control para SlowFlyer (3 pcs)
1 x	Varilla mando roscada M2,5 (2 uds)
2 x	SistemaLDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 mm
1 x	Horn aluminio RH largo (2pcs)
2 x	Horn extra largo 60x30
2 x	Horn DUBRO 1/2A
1 x	Rueda CUB DUBRO 1/3 Scale (558TLC) 2 pcs
1 x	Rueda Scale 1/3 Vintage 240 mm / 9.33" (1 par)
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Rueda KOVO SLH 120x60 mm
1 x	Rueda de foam Ø 38 mm (2 pcs)
1 x	Cono hélice fija 42 mm diámetro / eje 5,0 mm
2 x	Cono hélice fija 60 mm diámetro / eje 5,0 mm
2 x	Suncover 100cc Red
2 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Cono Aluminio hélice fija 40 mm diámetro / eje 3,0 mm
1 x	Rueda 127x43 centro aluminio Ø6.0 mm
1 x	Rueda 4"-102 x 45 mm centro aluminio Ø5 mm
1 x	Rueda superlight standard 100 mm (2 pcs)
1 x	Rueda NoNa 175 x 55 mm (2 pcs)
1 x	Cono NUT 1/4x28
1 x	Rueda FEMA 152 mm / 8 mm
1 x	Rueda 102 mm / 4" DUBRO inchable (2 pcs)
1 x	Rueda FEMA 112 mm / 6 mm
1 x	Rueda plastico 30 mm tipo PIPER (2 pcs)
1 x	Rueda NoNa 200 x 60 mm (2 pcs)
1 x	Ruedas MINI (3 pcs)
1 x	Cono NUT M10x1
1 x	Rueda 89x32 (3.5") centro aluminio eje Ø5 mm
1 x	Neumático Ø 90 mm (1 ud) Electron Retracts
1 x	Hélice MENZ-S 21x10
1 x	Epoxy SLOW-CURE™ 30 min (130g)
1 x	Epoxy QUIK-CURE™ 5 min (260g)
1 x	Eje rueda 4x16 mm (2 uds)
1 x	Helice APC 14x10 Electric
1 x	Helice APC 10x10 Electric
1 x	Círculo autoadhesivo 10 mm (72 pcs)
1 x	Soporte trasero 35 mm para motor gasolina
1 x	Helice APC 10x4.7
1 x	Helice Carbono 17x18
1 x	Bisagra de compuerta negra 30x16 mm (2 pcs)
2 x	Horn de mando extra-largo ajustable aluminio 2,8x34
2 x	Horn de mando variable inclinado 6 mm M3
2 x	Reenvío de Profundidad 70x28 mm "tipo Kato"
1 x	Horn de mando corto ajustable 3x24
1 x	Horn mando long (2 pcs)
1 x	Horn de mando 5/15 con rótula M2
1 x	Horn control flaps (1 pcs)
2 x	Horn F3A de Titanio 16 mm (2 uds)
2 x	Reenvío de Profundidad 80x28 mm "tipo Kato"
1 x	Cable con accesorios
1 x	Acople ALU M2,5 Ø 3 (2 uds)
2 x	Horn de mando 6/35 con rótula M3
1 x	Hélice plegable CAM-Prop 8x6
1 x	Cable servos silicona 0,35 mm2 Futaba (5 m)
1 x	Hélice MENZ-S 21x12
1 x	Cable servos PVC 0,35 mm2 Graupner (100 m)
1 x	Alambre de cobre esmaltado Ø0,2 mm (5 m)
1 x	Cable "Y" equilibrador 6S, 2x JST-XH / 1x JST-EH
1 x	Hélice MENZ-S 20x9
1 x	Hélice MENZ-S 20x8
1 x	Cable servos PVC 0,14 mm2 Graupner (100 m)
1 x	Cable servos silicona 0,14 mm2 Graupner (100 m)
1 x	Hélice MENZ-S 15x12
1 x	Cable servos PVC 0,08 mm2 Graupner (5 m)
1 x	Cable servos silicona 0,25 mm2 Graupner (5 m)
1 x	Canulas HYSOL (10 pcs)
1 x	Epoxy QUIK-CURE™ 5 min (130g)
1 x	Adhesivo estructuras epoxi RESOLTECH 3350 (1 kg)
1 x	Gancho de lanzamiento fijo
1 x	Arandela conica alumino M4 azul (8 pcs)
1 x	Soporte trasero 50 mm para motor gasolina
1 x	Helice APC 14x12 Electric
1 x	Brazo servo aluminio V1-JR 1,0" M2 dorado
1 x	Helice Carbono 16x16 Slim
1 x	Helice APC 14x4 W
1 x	Helice Carbono 18x16
1 x	Helice APC 14x6 Glow/Gas
1 x	Hélice MEJZLIK 20x10 Electric light (36 g)
1 x	Helice Carbono 13x7.5
2 x	Horn metálico ajustable rosca M3
1 x	Horn micro T2 Ø 1 (2 uds)
1 x	Horn de mando largo ajustable aluminio con rodamiento 2,8x24
1 x	Horn mando small (2 pcs)
3 x	Reenvío de Profundidad 90x28 mm "tipo Kato"
2 x	Horn de mando largo ajustable aluminio 2,8x24
1 x	Horn de mando medio extrafuerte con rodamiento 2,8x24
3 x	Horn de mando corto extrafuerte con rodamiento 2,8x15
1 x	Horn de mando largo ajustable con rodamiento
3 x	Horn de mando variable 5 mm M2
1 x	Horn largo de latón M2 para cable (2 pcs)
2 x	Horn largo de latón M4 para cable (4 pcs)
1 x	Set bisagras indoor con horns integrados
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x	Horn de mando largo extrafuerte con rodamiento 2,8x34
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
1 x	Horn de mando variable 6 mm M3
1 x	Horn de mando variable inclinado 5 mm M2
1 x	Horn de mando pequeño ajustable aluminio con rodamiento 2,8x15
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 6 m
1 x	Placa de montaje Ø 40 mm para motores eléctricos
1 x	LO 100 ARC 3.3m,cabina
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 4 m
1 x	Horn de mando duraluminio F3A 30x10x23,5 mm (2 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x	Horn largo de latón M2 para cable (10 pcs)

4,313.37EUR