50.00EUR 15.90EUR

Mini-Pix Esc 15 Amp
[KON4002]


This products have a good performance and can ensure high efficiency (90% including when you're operatting under full gas avoiding overheating and flight time low) and competing with explosion engine's performance.

General features:
- Only for brushless motors.
- Soft start that rapidly rise up to the maximum power (providing security).
- RPM control for the velocities of drifts and the main rotor, great for travel in and out of the maneuvers.
- Auto-Programmable mode (APM) that automatically adjusts the variator to the radio's gas channel and sets the strength of stopping, and current and fast start limitations.
- Supply limitation.
- High performance microprocessor design thas controles the heat dissipation.
- Overheatting protection.
- Superflex high temperature cables.
- You can work with or without sensorizar engines.

Pix variator features:
- The new Pix variators are effective and low-cost; they're designed for brushless motors and replace Swing Kontronik series. The desig is entirely new. Compared with their predecessors, this variators have new and improved performance characteristics.

- The operation has been reduced to essentials things. Do not you know anything about timing / frequency? No matter; you don´t have to be an expert in engines to manage your Pix. Like their predecessors, the Pix variators, adapt themselves automatically to the engine. Thanks to their APM mode, there is no need to program it. You can concentrate on the basics: connecting the battery and fly! It's that easy!

- All variators come with a Pix Li-Po integrated that can turned on and off simply by pressing a button. In fact, a major goal in its design, was to build the variator optimized to work with rotary engines of a large number of poles like Kontronik Dancer.

- The Pix variators are an attractive alternative in cost, compared to Jazz Kontronik if you do not want any specific function such as strong BEC, unlimited partial load condition or high voltage input.

- Moreover, now the PIX drives are programmed through the interface ProgCARD.


few units
few units

Reviews

Customers who bought this product also purchased
AXI2203/40 VPP
AXI2203/40 VPP

few units
few units

Propeller Pleg CAM Carbon 6x3
Propeller Pleg CAM Carbon 6x3

few units
few units

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
    Brushless->
      Aero-Naut
      Hacker
      Jeti->
      KAVAN
      Kontronik->
        Accesorios
      MGM
      Otros
      RIPMAX
      ROI-Import
      Top Model
      YGE
    Brushed
    Program Cards
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Oracover Yellow CUB 10 m
1 x Oratex Natural White 20m
1 x Oracover Red 2 m
2 x Oracover Yellow CADMIO 10 m
1 x Ply-Span 450x600/13g Red
1 x Oratex Natural White 2m
1 x Ply-Span 450x600/13g Blue
1 x Oracover White 2 m
2 x Oracover Azul Cielo 2 m
2 x Oracover Brown 2 m
2 x Oratex White 2m
1 x Ply-Span 450x600/13g Yellow
2 x Oracover Yellow CADMIO 2 m
1 x Oracover Azul 2 m
2 x Monokote BLUE metalizado (1.8x0.65m)
1 x Monokote BLANCO jet (1.8x0.65m)
2 x Ply-Span 450x600/13g Orange
1 x Ply-Span 450x600/13g White
2 x ORACOVER transparent Yellow (10 m)
1 x Oracover CARBON Metalic 1 m
1 x Oracover Green10 m
1 x Oratex Red Fokker 10 m
2 x Monokote ROJO misil (1.8x0.65m)
1 x Oracover White 10 m
1 x ORACOVER Fluor red (2 m)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
2 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
2 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Straightened threaded rod M3 - 1m
1 x Straightened rod Ø 2.0 mm x 1000 mm
2 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Threaded coupler M3 (10 uds)
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
2 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
2 x Kwik link AL M3 con Clip (2 pcs)
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
2 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
2 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Threaded coupler M2 (10 uds)
1 x Couple M4 for wire (10 pcs)
1 x Rescue 1,8m2 / BackPack
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x Smoke set "S"
1 x Initior Transmitter FTX2 Wireless
1 x Support ECU Xicoy X-45
1 x PVC red battery termo-retract 68 mm (10 m)
1 x Oracover Yellow CUB 2 m
2 x PVC transparent battery termo-retract 85 mm (1 m)
1 x Oracover Black 2 m
1 x PVC blue transparent battery termo-retract 95 mm (1 m)
1 x 12.7 mm 2:1 black termoretract tube
1 x Oratex Antik 2m
1 x Head upper part
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Tail boom
1 x Blade holder center
1 x Carbon plate 350x150x2.0 mm
1 x Nut M2 securing
1 x Screws M1,6x6 Allen
1 x Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain)
1 x Nut M1,6
1 x Head core bushing
1 x Carbon Non-Woven, 245 g/m² 125 cm x 20 m
1 x Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
1 x Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x Side Plate
1 x Carbon plate 500x400x2.0 mm ISOTECH
2 x Head lower part
1 x Blade holder lower
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Balls 4 mm
1 x Nut M2
1 x Head runner
1 x Head spacer
1 x Baering 3x8x4
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain)
1 x Washer 2.2×4
1 x Foam plastic plates (310x210x3 mm)
1 x Angled clevis with threaded rod M3
2 x Ball Link ALU M3 - RH (1 pcs)
1 x Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
1 x Foam plastic plates (310x210x8 mm)
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Glass fibre sleeve Ø 20 mm
1 x Ply-Span 450x600/13g Black
1 x MYLAR film A350 (1000x500 mm)
1 x Wire easy tensioner (red)
1 x wire tensioner (red)
1 x Pulley brass 5/1,5 (2 pcs)
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Wire easy tensioner (silver)
1 x Cable coupler M3 (10 uds)
1 x Cable coupler M3 (10 uds)
1 x Mini-handed clamp
1 x Goma arrancador Ø36 mm x 30 mm
1 x Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x Oracover ROYAL RED 2m
1 x Oracover Black 10 m
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Turnbuckle M2x22/35 (2pcs)
1 x Threaded coupler M2 (10 pcs)
1 x Cable coupler M2 (10 uds)
1 x Pulley brass 4/1,5 (2 pcs)
1 x Pulley brass 2,5/1 (2 pcs)
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x BRASS CONTROL HORN M3x16 mm 2pcs
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x Hot Glue Stick BLACK
1 x Hot Glue Stick RED
7,285.08EUR
Manufacturers
Manufacturer Info
KontroniK
KontroniK Homepage
Other products
Languages
Español English
Currencies