1,850.00EUR

Boomerang SPRINT V2 Red/Yellow


Technical information:
Wingspan: 2006 mm / 79 inches
Length: 1880 mm / 73 inches
Weight with full fuel 14kg / 29lbs
Combo included E-retracts
Turbine 80 to 120 size (not included)
5 Channles / 7 servos(not included)

The Boomerang Sprint is by far the workhorse of the Boomerang Squadron. Suitable for the 80 to 120 size range of turbines The Sprint is an all wood ARF jet trainer that has trained hundreds, maybe even thousands of turbine enthusiasts. But don’t be fooled by the “Trainer” label. The Sprint is a very capable aerobatic jet that will give countless thrills when you push it through an aerobatic routine. From rolling circles and stall turns, the Sprint can do it all. And when you’re ready to land it will slow down to a crawl for those short field landings. Being an all wood airframe, covered in genuine OraCover film, should you have that unfortunate bump in the road it is easily repaired using basic building skills and materials. You’ll be up and flying again in no time. Whether this is your first jet or your tenth jet, no hangar is complete without a Boomerang Sprint in it. The kit includes a complete set of all electric landing gear which are robust and will provide years of service. The brakes are also electric and with the included controller setup is a breeze. All push rods and hardware are included. Kit comes with a 3.7 litros / 125 ounce composite fuel tank.


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x TURBINATOR 2 BLUE AND YELLOW 1778 mm Combo
1 x Boomerang SPRINT V2 Red/White/Blue
1 x Boomerang SPRINT V2 Red/Yellow
1 x Boomerang ELAN STARS & STRIPES Combo
1 x PC-21 2880 mm Spinner 5Blade red
1 x MB339 Saudi PNP
1 x Crystal TX 35.150 Ch 75
1 x MB339 Freece PNP 1790 mm
1 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x 58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x 2 mm female connector (2 pcs) with safety connector
1 x BALSA trip 6.0x6.0x1000 mm
1 x Buy Perforated film 100 cm / 50 m
1 x Cable set PREMIUM, fuselage/wing
1 x ORACOVER Fluor red (2 m)
1 x 300x4 mm M4 shaft ship
1 x A/C economy plywood 600x300x6+.0 mm
1 x Gates hinge aluminium (1 pcs)
1 x SE Ring 480 mm (2 pcs)
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Connectors banna oro 3 mm (M/F)
1 x Conector FUTABA Servo male (10 pcs)
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x 12x8 tree blades propeller
1 x Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x 3.17 mm Prop Adapter CN-Spinner
1 x Fiberglass heat shield Ø 6 mm 1000 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Conector BEC male (10 pcs)
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Extension MPX-MPX 20 cm
1 x Conector JAPAN G2 Set 5 pares
1 x 4,8x1000 mm 2:1 blue termoretract tube
1 x 105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x A/C quality beech plywood 600x300x5.0 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Carbon fiber rod 14 mmx1000 mm
1 x SE Ring 450 mm (2 pcs)
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Glases Moritz
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Oracover Black 10 m
1 x Protective Cover for wires Ø 3 mm 1000 mm
1 x Gates hinge black 30x16 mm (2 pcs)
1 x A/C quality beech plywood 600x300x0.8 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x 2,4x1000 mm 2:1 green termoretract tube
1 x Cable set Premium™ MAXI "one4two"
1 x 200m servo "Premium" wire (white/red/blue)
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Pin hinge 34x16 mm (10 uds)
1 x 14 mm portholes (10 pcs)
1 x Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x 1,2x1000 mm 2:1 black termoretract tube
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Protective open Cover for wires Ø 13 mm 1000 mm
1 x Glases Ace
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Oracover Azul 2 m
1 x Oracover Black 2 m
1 x Miniature brass strap hinge, 1 m
1 x Balsa panel 10x100x1000 mm
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Gates hinge
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x Black silicone 0,25 mm² wire (25 m)
1 x MYLAR film A350 (1000x500 mm)
1 x SE Ring 400 mm (2 pcs)
1 x Truck-trailer for gliders 720 x 285 mm
1 x M3 Maxi ball link (2 uds)
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Actuador lineal HLS12-100210-7.4v
1 x Slave-cable USB Easy Sim
1 x Long ball link M3 (6 uds)
1 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x Cable coupler M2x66 (2 uds)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x BRASS CONTROL HORN M3x16 mm 2pcs
1 x M2 5Diam short black ball link V2 (2 pcs)
1 x Cable coupler M3 (10 uds)
1 x Universal Colour Paste white 50 g
1 x Short ball link M2 (6 uds)
1 x 500 ml sealer (DOPE)
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Red aluminium servo arm V1-Futaba 1,25" inch M3
1 x Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x Servo TOPMODEL DS9010 T
1 x Red aluminium servo arm V3-Futaba 1,25inch M3
1 x Blue aluminium servo arm V2-Hitec 1,0 inch M3
1 x Servo SAVOX SV-1261 MG
1 x Red aluminium servo arm V1-Futaba 20 mm M2
1 x Servo SAVOX SV-0236 MG HV
1 x Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x Blue aluminium servo arm V1-Hitec 1,0" inch M2
1 x Servo TOPMODEL S7520 MG
1 x Red aluminium servo arm V3-Futaba 3-3,5inch
1 x ALU servo arm 3 mm shaft
1 x LA500 tail empennage
1 x Servo SAVOX SH 0257 MG
1 x Ball joint long
2 x Balls 4 mm
1 x TX 250 mW especial GOPRO
1 x 4 blades set
1 x Blade holder center
1 x Head spacer
1 x Servo SAVOX SV-1254 MG HiVolt Low Profile
1 x Head lower part
1 x Red aluminium servo arm V3-Futaba 3,5inch
1 x Blue aluminium servo arm V3-Hitec 1,0inch M3
1 x Servo AN-20 MGBBA
1 x Raer wall
1 x Red aluminium servo arm V2-Futaba 2,0 inch
1 x Head upper part
1 x 18 mm wing servo holder
1 x LA500 pre-rotation gear hub
1 x Cierva C30 Body Spain
1 x Screws M1,6x6 Allen
1 x Complet landing gear
1 x Servo SAVOX SA-128S SG
1 x Piñon motor rotor LA-500
1 x Servo inverter
1 x 90x75 mm standart servo cover
1 x Gold aluminium servo arm V1-JR 1,25" inch M3
1 x Cierva C30 spanish decoration Stickers
1 x Head core bushing
1 x Nut M1,6
1 x Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x Servo SAVOX SV-1273 TG
1 x Metalic nose for PROJETI
17,142.06EUR
Manufacturers
Manufacturer Info
Boomerang RC-JEts
Other products
Languages
Español English
Currencies