Inicio » Catálogo » Motores y Turbinas » Eléctricos » Brushless » KAVAN » KAV30.1638C

120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
  Turbinas->
  Eléctricos->
    Brushless->
      Actro
      AXI->
      FOXY/RAY
      Glavak
      Hacker
      Hacker FES System
      JETI
      KAVAN
      Kontronik->
      Mega
      MP Jet
      MULTIPLEX
      MVVS
      O.S.
      Plettemberg
      RIPMAX
      ROI-Import
      Scorpion Motor
      T-Motor
      Top Model CZ
      Typhoon
    Escobillas->
    Accesorios
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Estuche bolsa JETI DS
54.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

2 x	Bayoneta aluminio/strongal D12 mm/0,5 m
1 x	Bayoneta: Fibra de vidrio/Carbono (13.7/12.5) x 1000 mm
2 x	Bayoneta: Fibra de vidrio/Carbono (26.5/25 x 25/23) x 1000 mm
1 x	Ball link M2 (10 pcs)
1 x	Acoplador Micro M2 Ø 0,8 mm (10 pcs)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Ball link aluminio M3 V1 (10 pcs)
1 x	Clevis con trasmisión M3
2 x	Hélice POWER-PROP 13x9 Izda
1 x	Helice FALCON 20x9 carbono-gas
1 x	Varilla acero Ø 6,0 mm x 1000 mm
1 x	Varilla acero Ø 1,2 mm x 1500 mm
2 x	Varilla acero Ø 5,0 mm x 1000 mm
3 x	Varilla acero Ø 7,0 mm x 1000 mm
2 x	Varilla latón hexagonal Ø 3 mm x 1000 mm
2 x	Varilla latón hexagonal Ø 3.5 mm x 1000 mm
2 x	Varilla latón Ø 0,5 mm x 1000 mm
2 x	Varilla latón hexagonal Ø 5 mm x 1000 mm
2 x	Varilla acero Ø 0,5 mm x 1000 mm
1 x	Varilla acero Ø 2,0 mm x 1000 mm
2 x	Varilla acero Ø 2,5 mm x 1000 mm
1 x	Varilla acero Ø 4,5 mm x 1000 mm
1 x	Varilla acero Ø 5,5 mm x 1000 mm
3 x	Varilla Aluminio Ø 4,0 mm x 3000 mm
2 x	Varilla acero Ø 8,0 mm x 1000 mm
1 x	Varilla acero Ø 1,5 mm x 1500 mm
1 x	Varilla acero Ø 4,0 mm x 1000 mm
1 x	Varilla latón Ø 0,8 mm x 1000 mm
1 x	Tubo ABS 5,0x3,0x1000 mm
2 x	Conector equilibrado XH (5S) macho (2 pcs)
1 x	Conector banana oro 2 mm
1 x	Tubo carbono (L 1000 mm, Ø0,7 mm, Ø0,3 mm)
1 x	Tubo aluminio (L 1000 mm, Ø3,0 mm, Ø2,1 mm)
1 x	Conector equilibrado XH (4S) macho (2 pcs)
1 x	Conector DEANS hembra 30 cm
1 x	Tubo ABS 20,0x18,0x1000 mm
2 x	Conector 2 mm hembra (2 pcs) con conector de seguridad
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Conector banana oro 8,0 mm. 5 pcs (macho)
1 x	Tubo ABS 18,0x16,0x1000 mm
3 x	Tubo acero (L 1000 mm, Ø10 mm, Ø9,7 mm)
1 x	Tubo acero (L 1000 mm, Ø7 mm, Ø6,7 mm)
1 x	Tubo ABS 4,0x3,0x1000 mm
1 x	Tubo ABS 9,0x7,0x1000 mm
1 x	Tubo acero (L 1000 mm, Ø12 mm, Ø11,7 mm)
1 x	Tubo ABS 8,0x7,0x1000 mm
1 x	Conector banana oro 4 mm
1 x	Tubo ABS 3,0x1,0x1000 mm
1 x	Tubo ABS 8,0x6,0x1000 mm
1 x	Conector banana oro 3,5 mm
1 x	Tubo carbono (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Conector banana oro 6,0 mm Ultralight (pareja)
1 x	Adaptador Sub-d conector MPX
1 x	Conector DEANS 4 pines (1 par)
1 x	Conector BEC macho (10 pcs)
1 x	Tubo ABS 9,0x8,0x1000 mm
1 x	Tubo acero (L 1000 mm, Ø4 mm, Ø3,7 mm)
1 x	Tubo ABS 5,0x4,0x156 mm
1 x	Conector banana oro 2,5 mm (100 parejas)
1 x	Tubo ABS 4,0x2,0x1000 mm
1 x	Conector equilibrado XH (4S) hembra (2 pcs)
2 x	Conector banana oro 3 mm
1 x	Set de tubos de carbono (Ø38 mm y Ø14 mm)
1 x	Tubo aluminio (L 1000 mm, Ø5,0 mm, Ø4,1 mm)
1 x	Tubo ABS 16,0x14,0x1000 mm
1 x	Tubo acero (L 1000 mm, Ø9 mm, Ø8,7 mm)
1 x	Conector banana oro 5,5 mm antichispa
1 x	Conector BEC hembra (10 pcs)
1 x	Conector equilibrado XH (2S) hembra (2 pcs)
1 x	Tubo ABS 7,0x5,0x1000 mm
1 x	Tubo ABS 6,0x4,0x1000 mm
1 x	Conector banana oro 2 mm (Ultralight)
1 x	Tubo ABS 14,0x10,0x1000 mm
1 x	Conector 5,0 mm EC5 macho con funda (2 pcs)
2 x	Tubo ABS 2,0x1,0x1000 mm
1 x	Conector equilibrado XH (3S) hembra (2 pcs)
1 x	Tubo acero inox. Dia, 28 mm x 0.6 x 1000 mm
1 x	Conector banana oro 0,8 mm
1 x	Tubo acero (L 1000 mm, Ø5 mm, Ø4,7 mm)
1 x	Varilla ABS 2,5x1000 mm
1 x	Liston ABS 1,0x3,0x1000 mm
1 x	Cable servo PREMIUM 10m (blanco/rojo/azul)
1 x	Rotula 6 mm hexagonal con bola M3 (10 pcs)
1 x	Cinta autoadhesiva 20 mm x 12m; Diente 1.0 mm
1 x	Varilla carbono 1.5 mm x 1000 mm
1 x	Paramotor Trike XL
1 x	Para-RC Trike "RC-Bullix"
2 x	Soporte filtro FESTO (4 pcs)
2 x	Soporte bomba/flitro Xicoy X45
2 x	Rueda KOVO SLH 120x60 mm
1 x	Palas de autogiro de 330 mm
2 x	Varilla acero Ø 1,5 mm x 1000 mm
1 x	Depósito "Taxi Tank"
2 x	Varilla acero Ø 1,0 mm x 1000 mm
1 x	Cono INO de 102 mm (Imitacion carbono)
2 x	Tubo carbono 3K-PW (Ø20 mm, Ø18 mm L:2000 mm)
1 x	Protector Conector Dean-T (1 pareja)
1 x	Piloto 1/6 "Tony"
1 x	Piloto 1/12 "Langley"
1 x	Piloto 1/6 "John"
1 x	Prolongador servo 20 cm HITEC/JR
1 x	Hélice POWER-PROP 13x9
1 x	Varilla acero Ø 14,0 mm x 1000 mm
1 x	Varilla acero Ø 3,0 mm x 1000 mm
2 x	Varilla acero Ø 0,8 mm x 1000 mm
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Receptor CORE PBR-26XS 26ch
1 x	Servo GO-1023MG 7.0 kg.cm 0.09s/60º
1 x	Motor KAVAN PRO 2225-1600
1 x	Brazo servo Aluminio 25T M3 KAVAN 6.5 / 19.6 mm
1 x	Plancha contrachapado Abedul 600x300x6,0 mm
1 x	Conector equilibrado XH (5S) hembra (2 pcs)
1 x	Varilla latón Ø 1,0 mm x 1000 mm
1 x	Tubo de latón (L 1000 mm, Ø10,0 mm, Ø9,1 mm)
2 x	Tubo carbono 3K-PW (Ø30 mm, Ø26 mm L:1000 mm)
1 x	Tubo ABS 10,0x8,0x1000 mm
1 x	Tubo carbono 3K-Matt (Ø25 mm, Ø23 mm L:1000 mm)
1 x	Conector XT-60 (hembra)
1 x	Conector micro DEANS (T)
1 x	Tubo de latón (L 1000 mm, Ø2,0 mm, Ø1,2 mm)
1 x	Conector DEANS (T)
1 x	Conector 2 mm macho (2 pcs) con conector de seguridad
1 x	Prolongador LiPos XH>XH
1 x	Conector XT-30 (pareja)
1 x	Conector Centralita Optotronix Aurora
1 x	Soporte rojo para conectores de 3,5 mm
1 x	Conector equilibrado XH (8S) hembra (2 pcs)
1 x	Tubo carbono 3K-PW (Ø30 mm, Ø27 mm L:1000 mm)
1 x	Conector XT-90 (pareja)
1 x	Conector equilibrado XH (6S) hembra (2 pcs)
1 x	Tubo carbono (L 1000 mm, Ø7 mm, Ø5 mm)
1 x	Conector equilibrado XH (8S) macho (2 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Soporte Antena 2.4 Ghz (2 pcs)
1 x	Soporte conector MPX (6 pcs)
1 x	Soporte Filtro FESTO
1 x	Soporte conector MPX enrasado (6 pcs)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Soporte conector XT-60 (2 pcs)
1 x	Soporte tubo Ø 6mm (10 pcs)
1 x	Soporte bomba Xicoy X45
1 x	Bisagra de compuerta aluminio (1 pcs)
1 x	Soporte Angular conector XT-60 (2 pcs)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Soporte conector MPX empotrado (6 pcs)
1 x	Soporte Pitot JETI
1 x	Motor OS 3820-1200 eléctrico
1 x	Hélice POWER-PROP 7x7
1 x	Cable "Y" 15 cm
1 x	Rueda NoNa 105 x 35 mm (2 pcs)
1 x	Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x	Tubo cola RAINBOW
1 x	Cabeza Rotora Completa (3 palas)
1 x	Cruceta Rotor (3 palas)
1 x	Juego de 3 palas
1 x	Combo RAY C3542-1000 + ESC 60A
1 x	Autogiro LA500
1 x	Eje para motor Hacker A50 L
1 x	Eje para motor Hacker A20-S (3 uds)
1 x	Motor A30-14 L V4
1 x	Motor A20-22 L EVO
1 x	Motor A20-12 L EVO
1 x	Rodamientos para motores Hacker A50
1 x	Motor A60-7XS V4 28-pole kv330

4,055.57EUR