Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

16x8 BIELA propeller (3-blades) Pusher
68.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Straightened rod Ø 1.5 mm x 1500 mm
2 x	2,3 mm Prop Adapter M5
3 x	5 mm Prop Adapter M6
1 x	4 mm Prop Adapter M6
3 x	Straightened rod Ø 2.5 mm x 1000 mm
2 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	5 mm Prop Adapter M8
1 x	Straightened rod Ø 1.2 mm x 1500 mm
2 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
2 x	Straightened rod Ø 7.0 mm x 1000 mm
3 x	Aluminium rod Ø 4.0 mm x 3000 mm
4 x	Straightened rod Ø 0.8 mm x 1000 mm
2 x	2,3 mm Prop Drive Günther M4
4 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	6 mm Prop Adapter M8
3 x	Brass rod Ø 0.5 mm x 1000 mm
4 x	Straightened threaded rod M3 - 1m
2 x	Brass rod Ø 1.5 mm x 1000 mm
2 x	Brass hexagonal rod Ø 5 mm x 1000 mm
2 x	Straightened rod Ø 2.0 mm x 1000 mm
2 x	Straightened rod Ø 1.0 mm x 1000 mm
3 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
3 x	Straightened rod Ø 1.5 mm x 1000 mm
2 x	2 mm Prop Adapter M5
1 x	BALSA trip 2.0x2.0x1000 mm
2 x	Beech dowels 2.0 x 1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
2 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
2 x	Pine wood slat 3.0x5.0x1000 mm
2 x	BALSA trip 4.0x4.0x1000 mm
2 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
2 x	Walnut wood slat 1.5x1.5x1000 mm
4 x	BALSA triangular 6x6x1000 mm
2 x	Beech dowels 10 mm x 1000 mm
1 x	3 mm Prop Adapter M6
1 x	5 mm Prop Adapter M6
1 x	Prop Shaft Adapter 5 mm/M8 "long"
2 x	4 mm Prop Adapter M6
1 x	Small Crow DLE-170M
1 x	5 mm Prop Adapter M8
1 x	Prop Shaft Adapter 4 mm/M8 "long" 35 mm
1 x	3.2 mm Prop Adapter M8
1 x	Motor DLE 200cc Std
3 x	Motor A2212/13T
1 x	1000 ml sealer (DOPE)
1 x	Cabel "Y" 30 cm (graupner)
1 x	Premium servo extension 75cm
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	1/12 Pilot "Tom"
2 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Para-RC Mix
1 x	Straightened threaded rod M2-1m
2 x	Brass hexagonal rod Ø 4 mm x 1000 mm
2 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
2 x	Pine wood slat 6.0x6.0x1000 mm
2 x	Trailing edge BALSA 35x8x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	2.3 mm Adapter for 30 mm spinners
2 x	HITEC Power Supply 30A. Max. 540w
1 x	6 mm Prop Adapter M8
1 x	Power supply NT 40 Amp.
1 x	3,2 mm Prop Adapter M6
1 x	5 mm Prop Adapter M8
2 x	2,3 mm Prop Adapter M6
1 x	4 mm Prop Adapter M8
1 x	4 mm Prop Adapter M8
1 x	Glases Moritz
1 x	V tail SILENT DREAM 2.200 mm (Elec or Glider)
2 x	Motor mount class 48"
1 x	XT-90 connector (pair)
1 x	XH LiPo extension lead
1 x	XH male balance (9S) connector (2 pcs)
1 x	Red 4 mm connector holder
1 x	XH female balance (9S) connector (2 pcs)
1 x	MPX Sub-D Adaptor
1 x	Red 3m5 mm connector holder
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x	Glases Stratus
2 x	EDGE 540-A 91" (2310 mm)
1 x	EDGE 540-A 105" (2660 mm)
1 x	Quick hose connector 3-3 mm
1 x	Servo arm with 5 mm hole to FEMA 9810A
1 x	Professional Servo tester
1 x	ANGEL 48" pp orange/black/white
1 x	LASER 260 60" V2 ARF Yellow (SkyWing)
1 x	SLICK 360-B 104" (2640 mm)
1 x	LASER 260 60" V2 ARF Red (SkyWing)
2 x	SLICK 360-A 104" (2640 mm)
1 x	EXTRA NG 85" 2159mm yellow/blue
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	EXTRA NG 85" 2159mm red/white
1 x	ANGEL 48" pp red/blue/white
1 x	ARS 300 91" ARF 2311mm ORANGE
1 x	EXTRA NG 74" yello/blue/red (Skywing RC)
1 x	PC-6 Pilatus Porter Big "Tiger" (PICHLER)
2 x	SkyMaxx 1.550 mm (kit)
1 x	TRAINER RC Pilot V2 90" w/r ARF
1 x	BOOMERANG II 40/46 ARF 1.55mm
1 x	PC-6 Pilatus Porter Big "Fredi" (PICHLER)
1 x	Cessna SKYLANE T182 1.75m - Seagull Model
1 x	Servo arm with 6 mm hole to FEMA 9800A
1 x	Landing gear strap large (4 uds)
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Tap FESTO 4-4 mm
1 x	T-Hose connector 2-2-2 mm
1 x	Air pressure gauge
1 x	Y-Hose connector 4mm
1 x	Wheel cover holder Ø 6 mm (2 uds)
1 x	Wheel cover holder Ø 5 mm (2 uds)
1 x	Quick hose connector 6-6 mm
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	Servo TOPMODEL DS1413 T
1 x	Angled clevis with threaded rod M3
1 x	Quick hose connector 4-4 mm
1 x	Y-Hose connector 3-3-3 mm
2 x	90x75 mm standart servo cover
1 x	Wheel cover holder Ø 3 mm (2 uds)
1 x	40 mm air cylinder
1 x	58 mm micro servo cover
1 x	Y-Hose connector 6-6-6 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Birch plywood plate 600x300x1.5 mm
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Balsa panel 8.0x100x1000 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	A/C economy plywood 600x300x6+.0 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Balsa panel 4.0x100x1000 mm
1 x	Birch plywood plate 600x300x1.2 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Extension MPX-MPX 20 cm
1 x	USB Charger 120-240V AC
1 x	25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x	Big Crow DLE-170M
1 x	Cylynder DLE 20-RA
1 x	DLE 55-RA Muffler
1 x	XH female balance (3S) connector (2 pcs)
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	XH female balance (2S) connector (2 pcs)
1 x	XH male balance (5S) connector (2 pcs)
1 x	Tarjeta programadora RAY G2
1 x	Canister combo DLE 120 cc
1 x	DLE 55 Muffler
1 x	OS 37 SZ-H, Connecting rod
1 x	Bujia OS G5 gasolina
1 x	OS 37 SZ-H, Carburetor Wharf OS 40, 60, FS70, 91S and 120SE
1 x	Muffler DLE 30
1 x	Motor OS 15 LA
1 x	Muffler DLE-120 Right
1 x	Metalic nose for PROJETI
1 x	Connectors banna oro 3 mm (M/F)
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Connector CAN 15
1 x	Gold antispark 4 mm plug
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Telemetry interface ALTIS 6 cm
1 x	Connectors DEANS (T)
1 x	Telemetry interface ALTIS 20 cm
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	Conector Servo female 4 pines
1 x	Conector BEC female (10 pcs)
1 x	XH male balance (3S) connector (2 pcs)
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Altimeter Altis NAO
1 x	XH male balance (2S) connector (2 pcs)
1 x	Planetary gearbox(3,8:1)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	ARTIST 1.560 mm
1 x	PARAGON Trainer 46-55 1580 mm
1 x	Bidule 111 3000 mm Canopy
1 x	Servo TOPMODEL STANDARD S3217
1 x	BULLIT Wing 840 mm

21,626.01EUR