1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Oracover White 10 m
2 x Sebart 2.2 m YELLOW/BLACK (SebART)
2 x ULTRA STICK 10 cc ARF
2 x EDGE 540-A 74" (1880 mm)
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x "S" set for boats
1 x Pilot "Duke" Legends Series (Slimline)
1 x Buy Perforated film 145 cm / 50 m
1 x Hobbylite Filler, Balsa colour
1 x Horn 6/20 with M3 Bearing
1 x Extension silicon 35 cm male (Futaba)
1 x Blue silicone 0,5 qmm wire (50 m)
1 x Horn mando long (2 pcs)
1 x Yellow smoke bombs AX-60 (5 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x 1/12 Pilot "Cougar"
1 x SE Ring 450 mm (2 pcs)
1 x Plasti Dip Liquid Tape 429 ml black
1 x 1/12 Pilot "Fighter"
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x 5 LiPo XH>EH adapter
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Fresa corte diamante Ø 2.3mm (bola)
1 x 
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Universal Colour Paste white 50 g
1 x Cabel charger transmitter GRAUPNER
1 x Initior Transmitter FTX2 Wireless
1 x 1/10 Pilot "Jack"
1 x Connector CAN 15
2 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x 1/6 Pilot "Cindy"
1 x BALSA leading edge 8x10x1000 mm
1 x 1,5x50 mm allen screwdriver
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x EC-Cutter
1 x Double conector with JR adapter and 200 mm extension
2 x Fabric scissors curved Premium, 16 cm / 6" length
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Slave-cable USB Easy Sim
1 x Oracover Yellow CUB 10 m
1 x Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x DRACO 2.0m Helice 14.5x9 4-Blade
1 x PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF
1 x EDGE 540-A 91" (2310 mm)
1 x Sebart 2.2 m WHITE/BLUE (SebART)
1 x Blue aluminium servo arm V2-Hitec 1,25 inch M3
1 x Rudder 2_Tray 3.5~4 inch
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm)
1 x 800TVL CMOS camera for FPV
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x 10 mm Prop Adapter M12
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
1 x 6 mm Prop Adapter M8
1 x DPSI 2001 RV
1 x Steel brush wheel with 2.35mm
1 x 2.3 mm Adapter for 30 mm spinners
1 x Cross Connector 4.0 mm x 1000 mm
1 x Carbon Non-Woven, 240 g/m² 100 cm x 2m
1 x 6 mm Quick clamp_S (10 pcs)
1 x Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x Profile ABS half cane 2.5x1000 mm
1 x XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell
1 x 3.17 mm Prop Adapter CN-Spinner
1 x Cable set PREMIUM, fuselage/wing
1 x Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x DPSI V-Match
1 x XT-60 Plug Mold
1 x 3,2 mm Prop Adapter M6
1 x Soldering tip for KAVAN soldering iron KAV66.8338
1 x Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain)
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Servo-V-Limiter 5.2V
1 x Pushrod octagone 4/3
1 x Wheel collar 2 mm Ø (4 uds)
1 x M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs)
1 x Allen wheel collar M3x3
1 x Landing gear frontal support 29x26x13,5
1 x Landing gear frontal support 25x32x16
1 x Pushrod greyline 3/2 with coupler M2
1 x EDGE 540 1.73m SEAGULL Model
1 x SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x ARS 300 91" ARF 2311mm ORANGE
1 x Sukhoi 29S 2,6 m,CF landing gear(SebART)
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x SLICK 360-B 104" (2640 mm)
1 x EDGE 540-A 105" (2660 mm)
1 x Sukhoi 29S 2,6 m Yellow/Black (SebART)
1 x PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x ULTRA STICK 30 cc ARF
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x Sukhoi 29S 2,6 m White/Blue (SebART)
1 x EXTRA 330 LX 2.34m ARF (LX-09) Pilot
1 x Red aluminium servo arm V1-Futaba 17 mm M2
1 x aluminium servo arm V2-JR 2,0 inch M3
1 x Red aluminium servo arm V1-Futaba 1,0" inch M2
1 x Red aluminium servo arm V1-Futaba 15 mm iM2
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x PIX Hawk with accesories
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x Tube Pitot to PIXHAWK
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x 
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x SAVOX SH 0254 servo
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x ABS angle 5,0x5,0x1000 mm
1 x Profile ABS half cane 2.0x1000 mm
1 x Profile ABS triangular 6.0x1000 mm 90º
1 x Profile ABS half cane 6.0x1000 mm
1 x Schul-Malpinsel Gr.5
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x 3 mm Prop Adapter M6
1 x Profile ABS Square 2 x 1000 mm
1 x SCHARNHORST accessories
1 x Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
1 x DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
22,812.27EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies