1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x SAVOX SH 0255 MG servo
1 x Savox Brushless Servo SB-2271SG
1 x Servo SAVOX SW-1250 MG digi
1 x Extension MPX-MPX 20 cm
1 x Servo SAVOX SV-1261 MG
1 x Savox Brushless Servo SC-1251 MG
2 x Servo SAVOX SV-1270 TG
2 x Servo SAVOX SA-128S SG
2 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x Adaptadores carga 6s JST-XH
1 x Servo mounting frame SV-1260MG
1 x Servo SAVOX SB-2290 SG
2 x Servoarm SH-81, two sides, aluminium
1 x Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x Servo SAVOX SH 0257 MG
2 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x Piñones SAVOX SH-0350
1 x Servo SAVOX SV-1260 MG
1 x SAVOX SH 1250 MG servo digi
1 x Ferrita 17x10x6.5 mm
1 x Ferrita 27x14x7 mm
1 x Ferrita 14x8x5.5 mm
1 x Glases Moritz
1 x Ferrita con funda
1 x Optical RPM Sensor
1 x DYNAMOMETER S-1580
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Threaded coupler M3 (10 uds)
1 x Couple M4 for wire (10 pcs)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
2 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
2 x Aluminium red ball links M3 V1 (10 pcs)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Z type of cable coupler Ø 2 (2 uds)
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Threaded coupler M2 (10 uds)
1 x Stickers-digit for marking
1 x Circlick securite
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Blue aluminium double servo arm V3-Hitec 3,5inch
2 x Support XT60 conector (2 pcs)
2 x Tube support Ø 6mm (10 pcs)
1 x Support ECU Xicoy X-45
1 x Savox Brushless Servo SC-1267 SG
1 x Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Oracover light Grey 2m
1 x Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x Glases Flitemaster
1 x Oracover GREY Seafire Sea 2m
1 x Glases Aspen
1 x Motor KAVAN PRO 2225-1600
1 x Propeller POWER-PROP 14x9
2 x Porta Kwik link M4 4 mm (2 pcs)
1 x Servo SAVOX SV-1273 TG
1 x Conector MR-60 (pareja)
1 x 8Wx2 Navigation & Strobe, 11mm Green/White
1 x 8Wx2 Navigation & Strobe, 11mm Red/White
1 x Starter EM Gear Power 80
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x resin-hardener L-385 H-385 (1250 g)
1 x GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
2 x Porta Kwik link M3 3 mm (2 pcs)
1 x Pulley brass 2,5/1 (2 pcs)
1 x Threaded coupler M2,5 (10 pcs)
1 x Cable coupler M2 (10 uds)
1 x wire tensioner (black)
1 x Tester LiPo/LiIon/LiMn/LiFe
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Sanyo RX Battery Eneloop 6,0 V FUT
1 x Soporte filtro FESTO (4 pcs)
1 x Recessed MPX connector support (6 pcs)
1 x Angle support XT60 conector
1 x Support Pitot JETI
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Support pumb/filter Xicoy X45
1 x Support FUEL DOT V3
1 x Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery
1 x Mobile Terminal
1 x Prop Holder AXI 41xx V2
1 x ANGEL 48" pp red/blue/white
1 x LASER 260 60" V2 ARF Yellow (SkyWing)
1 x Sanyo RX Battery Eneloop RX 4,8 V Futaba
1 x ABS tube 14.0x10.0x1000 mm
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x ABS angle 6,0x6,0x1000 mm
1 x Pulley brass 16/2 (2 pcs)
1 x Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm
1 x Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left
1 x 16mm Gear-Spotlight, 4W
1 x 290 mm M4/M4 6.0x4.0 mm shaft ship
1 x ABS angle 10,0x10,0x1000 mm
1 x ABS tube 2.0x1.0x1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x ABS tube 10.0x8.0x1000 mm
1 x ABS rectangular profile 10x5.0x1000 mm
1 x ABS tube 16.0x14.0x1000 mm
1 x ABS angle 1.5x1.5x1000 mm
1 x 290 mm 290 mm M5x18 mm shaft ship
1 x ABS Strip 1.0x3.0x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x ABS tube 3.0x1.0x1000 mm
1 x GPS Logger Dymond
1 x Pulley brass 6/1,5 (2 pcs)
1 x Selfstarr DLE55, EME55/60, DLA56, SE 55
1 x Spark motor OS nº 3
1 x Deposito combustible tipo "turbina" 330 ml
1 x Spring Clip Ø25 mm
1 x Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas
1 x Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs)
1 x Micro clevis 0.8 mm(10 uds)
1 x Microbalon filler for CA glues. Packaging bottle 20g
7,199.96EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies