Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Hélice Falcon 22x12 eléctrica
105.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Tubo ABS 7,0x6,0x1000 mm
1 x	Acople ALU M2,5 Ø 6 (2 uds)
1 x	Horn de mando carbono 20 mm
1 x	Horn de mando 6/35 con rótula M3
2 x	Horn aluminio pequeño azul (2pcs)
1 x	Horn 16,5x20 mm (2 pcs)
2 x	Horn aluminio negro LH largo L31xH30 (2pcs)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Horn aluminio pequeño amarillo (2pcs)
2 x	Acople ALU M2 Ø 3 (2 uds)
1 x	Acople ALU Izda. M3 Ø 4 (2 uds)
1 x	Horn control flaps (1 pcs)
1 x	Horn aluminio anodiazado 6 mm rojo con rótula
1 x	Horn de mando 5/20 con rótula M2
1 x	Horn corto de latón M2 para cable (2 pcs)
1 x	Acople ALU M2 Ø 4 (2 uds)
1 x	Acople ALU M3 Ø 6 (2 uds)
1 x	Acople ALU Izda. M2,5 Ø 3 (2 uds)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Cable con accesorios
1 x	Horn aluminio pequeño rojo (2pcs)
2 x	Horn corto de latón M4 para cable (10 pcs)
1 x	Horn de mando 5/10 con rótula M2
1 x	Horn con ball 40x30
1 x	Acople ALU Izda. M2,5 Ø 4 (2 uds)
1 x	Acople ALU M3 Ø 4 (2 uds)
1 x	Horn aluminio anodiazado 6 mm azul con rótula
1 x	Horn con ball 55x40
2 x	Pegatinas números para marcar
1 x	Cartucho de humo Verde 140 g
1 x	Cargas cohete B4-0 (6 pcs)
1 x	Espuma expulsión paracaídas
1 x	Cartucho de humo Amarillo 140 g
1 x	Cartuchos de humo AX-60 blanco (5 pcs)
1 x	Iniciadores para AX-60 (5 pcs)
1 x	Iniciadores para AX-60 (5 pcs)
1 x	Cartuchos de humo AX-9 blanco (10 pcs)
1 x	Cartucho de humo Rojo 140 g
1 x	Cartucho de humo Amarillo 65 g
1 x	Cartucho de humo Verde 100 g
1 x	Cartucho de humo Blanco 100 g
1 x	Iniciador FRX2 Wireless Receptor
1 x	Set de Humo "S"
1 x	Sistema remoto de ignición eléctrica
2 x	Set de Humo "Planeador"
1 x	Cartucho de humo Rojo 65 g
1 x	Prolongador cable servo 0,14 PVC, conector ZH micro
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Prolongador Futaba hembra 40 cm de silicona
1 x	Prolongador servo 15cm MULTIPLEX
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Prolongador S-Bus 1-2 silicona 30 cm
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Prolongador 30 cm (Futaba)
1 x	Cable silicona "Y" 30 cm (Futaba)
1 x	Prolongador Futaba 100 cm Ø 0,35 mm
1 x	Extension silicona 30 cm hembra (Futaba)
1 x	Prolongador Futaba macho 40 cm de silicona
1 x	Extension silicona 30 cm hembra (Graupner)
1 x	Prolongador servo 20 cm HITEC/JR
1 x	Gorra Jeti Negra
1 x	Gafas Stratus
1 x	Gafas Zurich Sport Sunglasse Dark Sensity MAGENTA
2 x	Anemometro Xplorer3
2 x	Anemometro Xplorer2
1 x	Gafas Moritz
1 x	Gafas Ace
1 x	Gafas Innovation Plus
1 x	Cable acero trenzado Ø 0,5 mm (2 m)
1 x	Destornillador Allen 1.27 mm
1 x	Varilla carbono 4.0 mmx1000 mm
1 x	Perfil de ABS cuadrado 2 x 1000 mm
1 x	Varilla ABS 5,0x1000 mm
1 x	Manga viento Ozone S - 700 mm
1 x	Bisagra papel CA (12 uds)
2 x	Sistema cierre baterías 20x200 mm
2 x	Horn de mando largo ajustable aluminio con rodamiento 2,8x24
1 x	Conector Servo hembra 4 pines
1 x	Cartuchos de humo AX-3 blanco (10 pcs)
1 x	Device Terminal
2 x	Anemometro Xplorer1
1 x	Cable telemetría ALTIS para Futaba
1 x	Altímetro Altis V4
1 x	Cinta autoadhesiva 13 mm x 16.80m; Diente 0.5 mm
1 x	Sistema cierre Mini 14x60 mm (4 pcs)
1 x	Sistema cierre 400 mm con abrazadera (2 pcs)
1 x	Horn de control para SlowFlyer (3 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x	Set bisagras indoor con horns integrados
1 x	Horn de mando corto con rodamiento (2 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x	Cable simulador USB multiplayer
1 x	SistemaLDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 mm
1 x	Altímetro Altis NANO
1 x	LDC Small para MultiLog y UltraLight
2 x	Cable telemetría ALTIS 6 cm
1 x	Anemometro Xplorer4
1 x	Cable telemetría ALTIS 20 cm
1 x	Combo ALTIMETRO SHRead
1 x	Resina Epoxy L (2.5 Kg)
1 x	Resina Epoxy L-385 con catalizador H385 (7 kg total)
1 x	Varilla acero Ø 4,0 mm x 1000 mm
1 x	Varilla acero Ø 1,2 mm x 1500 mm
1 x	Varilla latón hexagonal Ø 3.5 mm x 1000 mm
2 x	Tornillo Servos M2x9/16 (4 pcs)
2 x	Medidor angulos y/o incidencias
2 x	Varilla latón Ø 0,5 mm x 1000 mm
1 x	Varilla acero roscada M2 - 1m
2 x	Varilla acero Ø 1,0 mm x 1000 mm
2 x	Varilla acero Ø 5,0 mm x 1000 mm
1 x	Varilla latón hexagonal Ø 3 mm x 1000 mm
1 x	Varilla acero Ø 2,5 mm x 1000 mm
2 x	Varilla acero Ø 5,5 mm x 1000 mm
2 x	Varilla acero Ø 2,0 mm x 1000 mm
1 x	Varilla latón hexagonal Ø 5 mm x 1000 mm
1 x	Varilla latón Ø 0,8 mm x 1000 mm
1 x	Varilla acero Ø 14,0 mm x 1000 mm
2 x	Varilla acero Ø 1,5 mm x 1500 mm
1 x	Varilla acero Ø 0,5 mm x 1000 mm
1 x	Varilla latón Ø 1,0 mm x 1000 mm
1 x	Varilla acero Ø 3,0 mm x 1000 mm
1 x	Anillo espaciador para hélice graupner 8/5.5 mm
1 x	Cartucho de humo Blanco 65 g
1 x	Listón de HAYA redondo 3,0 x 1000 mm
1 x	Cono INO 75 mm Chrome (Imitacion metal)
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x	Horn de mando largo ajustable aluminio 2,8x24
1 x	Horn de mando corto extrafuerte con rodamiento 2,8x15
1 x	Horn aluminio LH largo L31xH30 (2pcs)
1 x	Cable telemetría ALTIS 12 cm
1 x	DJI Mavic Air Fly More Combo
1 x	Polvo de algodon 500g
1 x	Endurecedor MEKP 100 g
1 x	Resina Epoxy L-385 con catalizador H385 (3.5 kg total)
1 x	Microbalones (0.12g) 400 g (aproxx 3.3 l)
1 x	Kit de montaje "S" para avión
1 x	Cono carbono para F3A 75 mm para Hacker C-50
1 x	Cono Aluminio hélice fija 50 mm diámetro / eje 5,0 mm
1 x	Cono plástico rojo hélice fija 30 mm diámetro
1 x	Emisora MZ-18, 9 Ch HoTT
1 x	Cristal RX 35.250 Ch 285
1 x	Cono Aluminio hélice fija 40 mm diámetro / eje 3,0 mm
1 x	Cristal TX 35.050 Ch 65
1 x	Conector FESTO 6-4mm
1 x	Cristal Universal TX 35.140 Ch 74
1 x	Cristal TX 35.150 Ch 75
1 x	Cono FALCON 82 mm 3-BL carbon ventilado
1 x	Bisagra de Flaps 33x9 mm (6 uds)
1 x	Pinza de cierre tubo 6 mm
1 x	Extension silicona 30 cm macho (Graupner)
1 x	Cristal Universal RX 35.170 Ch 77
1 x	Plancha aluminio 500x250x0.5 mm
1 x	Micro Cristal RX 35.070 Ch 67
1 x	Cono INO 57 mm Chrome (Imitacion metal)
1 x	Capuchón decorativo interruptores TX
1 x	Cono hélice fija 60 mm diámetro / eje 5,0 mm
1 x	Programador ALTIS V4
1 x	GPS Altis
1 x	DJI FPV Combo
1 x	Cable TS832 a Gopro AV/Power
1 x	Cono NUT 1/4x28
1 x	Microbalones relleno CA 20g
1 x	Gelcoat blanco 1 Kg
1 x	Resina Epoxy L-385 (1250 g)
1 x	Polvo de algodon 7 Kg
1 x	Varilla latón Ø 1,5 mm x 1000 mm
1 x	Varilla acero Ø 0,8 mm x 1000 mm
1 x	Microbalones (2.5g/cm3 - Aprox 1L)
1 x	Cianocrilato CA Glue (medium) 20g
1 x	Helice APC 11x3.8 SF

7,577.08EUR