25.00EUR

Lipo KAVAN 2200 mAh 11.1v 30/60C
[KAV33.7126]


Lipo KAVAN 2200 mAh 11.1v 30/60C
KAVAN 30/60C lithium polymer packs are great for Sunday flyers, all-around and sport models; they feature 30C max. discharge rate, charge rate 1-2C, wide capacity range (350-3250 mAh) and long lifespan at truly affordable price.
KAVAN 30/60C packs present a perfect power supply for all-around sport, semi-scale and aerobatic models (both pattern and 3D), scale boats etc. that will make happy Sunday flyers or skippers. The comparatively high discharge rate allows unleashing the full power of your power unit, quite aggressive flight style and all sorts of fun.
Do not use a charge rate higher than 2 C, the recommended charge rate is 1-2 C. We recommend using a balancer during every charge. KAVAN 30/60C LiPo batteries do not require any initial forming; however, if you intend to use 2C charge rate, the initial three charging cycles should be performed at a rate not higher than 1C. There is no need to discharge the LiPo batteries before the charging - you can charge partly discharged packs.
The batteries are supplied as "Air Packs“ optimized for model planes and helicopters. The packs feature heavy duty silicone power (charging) cables without connectors and balance cables with JST-XH connectors that could be connected directly to the balance sockets of the most of KAVAN, Raytronic, SkyRC, GT Power etc. chargers. The package contents: KAVAN 30/60C battery pack, instruction manual.
Capacity [mAh]: 2200 ; Voltage [V]: 11.1 ; Charging current [A]: 2.2 - 4.4 ; Max. Charging current [A]: 4.4 ; discharging current [A]: 66 ; Max. discharging current [A]: 132 ; Energie [Wh]: 24.4 ; Lenght [mm]: 107 ; Width [mm]: 35 ; Height [mm]: 22 ; Weight [g]: 164


temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
    A123 LiFe Batteries
    Accesories
    AIRSOFT Battery
    Lead batteries
    LiIo Batteries
    LiPo Batteries->
      E-Flite
      Gens Ace
      KAVAN
      RAY/FOXY
      ROBBE
      ROI IMPORT
      SPEKTRUM
      TopFuel
    NiMH/NiCd Batteries
    Battery Testers
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 
1 x Hovercraft sailcloth
2 x Servo NARO Max Std
1 x Propeller POWER-PROP 13x9
1 x DUPLEX 2.4EX Central Box 210
1 x FALCON 20X9 CARBON PROPELLER (GAS)
1 x Propeller POWER-PROP 14x9
1 x Straightened rod Ø 14.0 mm x 1000 mm
2 x CNC FPV Display screen&Transmitter Holder Vertical
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Rocket D9-7
1 x Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm
1 x Rigid coupling brass Ø 2 mm L: 15 mm
1 x Ancla Met. 16 mm (5 pcs)
2 x Catalog AERO-NAUT 2016
1 x La Capitania di Venetia accesories
1 x Ancla 40 x 24 mm (2 pcs)
1 x GameCommander USB Universal
1 x Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey)
1 x Barandilla Ms 10x250 mm (2 pcs)
1 x Rigid coupling brass Ø 5 mm L: 25 mm
1 x SE Ring 300 mm (2 pcs)
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x Glases Ace
1 x ABS Strip 1.5x8.0x1000 mm
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x ABS Strip 1.5x3.0x1000 mm
2 x Piloto Jet "Green" 1/6 Scale
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Pin hinge 34x16 mm (10 uds)
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x ABS Strip 1.0x4.0x1000 mm
1 x SE Ring 240 mm (2 pcs)
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x 20x200 mm battery rings
1 x Round Rod 2,0x1000 mm
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x Strip 1,5x1,5x330 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x Round Rod 5,0x1000 mm
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x 120x60 mm SLH KOVO wheel
1 x Pilot "Anthony" (Slimline)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Strip 2,0x2,0x330 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x 1/10 Pilot "Jack"
1 x 1/4 Pilot "Mike"
1 x SE Ring 450 mm (2 pcs)
1 x Tape GFK 38 mm
1 x SE Ring HACKER 300 mm (2 pcs)
1 x 1/7 Pilot "Japanese"
1 x Round Rod 1,0x1000 mm
2 x Piloto jet 130 mm
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Miniature brass strap hinge, 1 m
1 x Strip ABS 2.0x8.0x1000 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x SE Ring 200 mm (2 pcs)
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Strip ABS 2.0x3.0x1000 mm
1 x 800TVL CMOS camera for FPV
1 x Glases Flitemaster
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x Red smoke canister 100 g
1 x Profile ABS Square 3 x 1000 mm
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Universal Colour Paste deep black 250 g
1 x Angled clevis with threaded rod M3
1 x Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x Profile ABS Square 4 x 1000 mm
1 x U Profile ABS 3,0x6,0x1000 mm
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x ABS angle 6,0x6,0x1000 mm
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x U Profile ABS 5,0x10,0x1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x Racor 2/3 mm
1 x SERVO HOLDER
1 x Banna gold connector 2,5 mm (M/F)
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x Transom 40 mm
1 x Connectors banna oro 0,8 mm (M/F)
1 x 10 mm dogdrive props
1 x Ringöse 10 mm (50 pcs)
1 x Propeller 3BL 30 mm M4 plastic Right
1 x Mounting single stop Ms 10 mm
1 x Coupling for 5 mm axis
1 x Railing 5x100 mm
1 x Feedthroughs 4 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Gold antispark 4 mm plug
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Cleat 20 mm (2 pcs)
1 x Connector CAN 15
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x 2 mm female connector (2 pcs) with safety connector
1 x XH female balance (5S) connector (2 pcs)
1 x Tube Pitot to PIXHAWK
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x 290 mm 290 mm M5x18 mm shaft ship
1 x 2 mm male connector (2 pcs) with safety connector
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Doppelpoller 17 mm (6 uds)
1 x 290 mm M4/M4 6.0x4.0 mm shaft ship
1 x Connectors banna oro 3,5 mm (M/F)
1 x Doppelpoller 7 mm plastic (10 uds)
1 x Escalera gris 7 mm (L 60mm)
1 x Spare Shaft Ø6mm L:450mm M5
1 x Wing connector 8pin with pin strip, plug & socket
1 x 261 mm M4/M4 6.0x4.0 mm shaft ship
1 x Furling sail Ms.10mm (5pcs)
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x Cornamusa 8 mm plastico (10 pcs)
1 x XH male balance (4S) connector (2 pcs)
1 x PIX Hawk with accesories
1 x Davit 70 mm (2 pcs)
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Propeller APC 10x5.5 MR Electric multirrotor
1 x Power supply NT 40 Amp.
1 x Cinta Goldfix 1m
1 x Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x 70 mm INO spinner (carbon imitation)
1 x 82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x 89 mm INO spinner (carbon imitation)
1 x Blade holder upper
1 x Head lower part
1 x LA500 rotor head core
1 x Blade holder lower
1 x LA500 ciclic lever
1 x Vasa model Catapult
1 x Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Connectors banna oro 6,0 mm (M/F)
1 x Sheave Pl. 2R. 12 mm
1 x Repair set for RAB0108-31
1 x Lancha neumatica 95 mm
1 x 45 mm flag mast
1 x Molinete / Cabestrante amarre Scale 1:32
1 x Coupling for 2,3 mm axis
1 x Wood anchor 30 mm (2 uds)
1 x Deck Lamp with Reflector Ø 22 mm 3 V
1 x Picas 12 mm (20 pcs)
1 x Ringöse 12 mm (50 pcs)
1 x Propeller APC 10x4.7 SF Pusher
1 x Propeller APC 10x6 Electric
1 x Propeller APC 10x5.5 MR Electric multirrotor PUSHER
1 x Propeller APC 13x4 Electric Pusher
1 x Propeller APC 10x10 Electric
1 x Propeller APC 11x5.5 Electric Pusher
1 x Propeller APC 10x6 Electric Pusher
1 x ASH 31 Mi Scale:1/3 - 7m
1 x Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery
1 x Landing gear axle Ø 6 mm (2 uds)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x 1/6 Pilot "John"
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Nose OPTIMA 2.200 mm (Elec or Glider)
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x 1/12 Pilot "Langley"
1 x Motor mount class 48"
1 x Eje barco 450x4 mm M4
1 x Spinner Alumin. fixed propeller 50 mm / 3,2 mm
1 x Spinner INO 63 mm Chrome (Imitacion metal)
1 x F3A carbon 80 mm spinner for Spark EVO
1 x Spinner INO 70 mm Chrome (Imitacion metal)
1 x F3A carbon 75 mm spinner for Hacker C-50
1 x Spinner INO 51 mm Chrome (Imitacion metal)
1 x Spinner Alumin. fixed propeller 45 mm / 5,0 mm
1 x F3A carbon 85 mm spinner for Hacker Q-80
1 x 82 mm INO spinner (carbon imitation)
1 x Spinner Alumin. fixed propeller 50 mm / 6,0 mm
1 x Spinner Alumin. fixed propeller 50 mm / 5,0 mm
1 x Spinner INO 75 mm Chrome (Imitacion metal)
1 x 51 mm INO spinner (carbon imitation)
1 x 38 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x F3A carbon 95 mm spinner
1 x 57 mm INO spinner (carbon imitation)
1 x 57 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x 45 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x 51 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x Spinner INOVA 102 mm Black
1 x Cono NUT 5/16"x 24 -M4
1 x Bearing 3x6x2,5
1 x Blades 330mm
1 x Ball joint long
1 x Head lower part New
1 x Bearing housing
1 x LA500 Autogyro
1 x Blade holder center
1 x Complet landing gear
1 x LA500 housing-lower cyclic
1 x Head spacer
1 x LA500 Blades
1 x Head upper part
1 x Cierva C30 simulated motor
1 x Autogyro Cierva C30 Spain
1 x Head core
1 x LA500 front gear holder
1 x Head runner
1 x Head core bushing
1 x LA500 freewheel bearing
1 x Cierva C30 spanish decoration Stickers
1 x Grub screw M3x3 shouldered (2 pcs)
1 x Cierva C30 Body Spain
1 x LA500 cyclic central part
1 x LA500 pre-rotation gear hub
1 x LA500 pre-rotation gear
1 x LA500 pilot-seat set
1 x Baering 3x8x4
1 x Balls 4 mm
1 x Batetia LiFe 3200 mAh 6.6v MPX PowerBox
10,178.07EUR
Manufacturers
Manufacturer Info
Kavan
Other products
Languages
Español English
Currencies