Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

PowerBox SparkSwitch RS unregulated
69.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	ALU servo arm 90º 3 mm shaft
1 x	ALU servo arm 3 mm shaft
1 x	ALU double servo arm 3 mm shaft
2 x	"L" servo arm 65x49 mm (2 pcs)
1 x	Hitec 20 mm servo arm
2 x	XTorque CFK Servohebel 38 HITEC 25T
1 x	Xplorer2 anemometro
2 x	Xplorer4 anemometro
2 x	Hitec 46 mm servo arm with ball link
2 x	Adapter rotula M3
2 x	Hitec 38 mm servo arm
2 x	Futaba 24/30 mm servo pull-pull double arm with ball link
2 x	Futaba 20 mm servo arm
3 x	HITEC 20 mm servo arm with ball link
2 x	46 mm Futaba servo arm tandem with ball link
3 x	Futaba 25 mm servo arm with ball link
1 x	Hitec 30 mm servo rounded arm
2 x	Futaba 30 mm servo arm with M3 ball link
2 x	XTorque CFK Servohebel 38
2 x	17 mm servo arm with ball link DES Graupner
2 x	Futaba 54 mm servo arm with ball link
2 x	Futaba 76/92 mm servo pull-pull double arm with ball link
2 x	Futaba 52 mm servo arm
3 x	Futaba 38 mm servo arm
2 x	Brazo Servo XTorque 52 mm HITEC 25T-6
3 x	Hitec 38 mm servo arm with ball link
2 x	Horizontal mounting servo holder
1 x	Ferrita 14x8x5.5 mm
2 x	Horn 16,5x20 mm (2 pcs)
1 x	Servo FUTABA S 3072 HV S-Bus
1 x	Horn 6/35 with M3 Bearing
1 x	Servo FUTABA BLS 272SV
1 x	Servo FUTABA BLS172 SV
1 x	Servo FUTABA S 3071 HV S-Bus
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Servo AN-8 HBA
1 x	20 mm carbon horn
1 x	Futaba BLS255/272/471SV - Gear Set
2 x	Brass control horn M4 short for wire (4 pcs)
2 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Futaba S3010 Servo - Standard BB 0.16s/6.5kg
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
2 x	6 mm red aluminium threaded horn with patella
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Horn 6/20 with M3 Bearing
1 x	6 mm aluminium horn with patella
1 x	Horn with ball 55x40
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Servos wing assembly set HS 80/81/82/85
1 x	Servo arms set 40/50/55/5055 MG
1 x	Servo arms set HS-60/81/85/5082MG/5085mg
1 x	Fast attachment for servos (25 pcs)
1 x	25 mm carbon servo arm
1 x	MIG 29 3D RTF, Servo
1 x	Metal gear set for HS81MG/5082MG
1 x	Miniature brass strap hinge, 1 m
1 x	Small pinned hinge (12 uds)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	18 mm reinforced hinge
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
2 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Long pinned hinge (6 uds)
1 x	Gates hinge aluminium (1 pcs)
2 x	25 mm reinforced hinge
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
3 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	Wing OXY 0,5 pulgadas2
1 x	Foil for sticking flaps and ailerons
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	Red aluminium servo arm V2-Futaba 1,75" inch M3
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Smoke set "Glider"
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
2 x	Futaba 38 mm servo arm with ball link
2 x	Futaba 14/20 mm servo pull-pull double arm with ball link
3 x	Hitec 25 mm servo arm with ball link
1 x	Futaba 17 mm servo arm with ball link HITEC
1 x	Servo GO-1088MGW 74 kg.cm 0.125s/60º
2 x	Vertical mounting servo holder
1 x	Support XT60 conector (2 pcs)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Suncover 100cc Red
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
2 x	Vertical servo holder
1 x	Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x	Cable with accesories
1 x	Long horn 50x26
1 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
2 x	Horn 20x28,5 mm (2 pcs)
1 x	RH long aluminium horn (2pcs)
2 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Small aluminium horn red (2pcs)
1 x	Extra long horn 60x30
1 x	Cable control set
1 x	Horn with ball 40x30
1 x	Short adjustable control horn 3x24
1 x	Horn DUBRO 1/2A
1 x	Horn 5/15 with M2 Bearing
1 x	5 mm M2 variable horn
1 x	Horn 5/10 with M2 Bearing
1 x	Brass control horn M2 large for wire (2pcs)
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
2 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
2 x	54 mm Futaba servo arm tandem with ball link
2 x	Hitec 52 mm servo arm
2 x	Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al
2 x	Xplorer3 anemometro
1 x	Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
1 x	Futaba 30 mm servo rounded arm
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	Indoor hinge with servo arm integraded
1 x	Snap pin for micro clevis (10 uds)
1 x	140 mm rods + T patellas set for direction control
1 x	100 mm rods + T patellas set for direction control
1 x	Cable grommet Ø 4 mm (4 uds)
1 x	Split pin 1x8 mm (10 uds)
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
2 x	Robart Door Hinge (Pk2)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
2 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Propeller balancer
1 x	HITEC 17 mm servo arm with ball link HITEC
1 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	Fiberglass landing gear for 140-160
1 x	Cable FUTABA profesor-alumno LEAD 9C cuadrado-cuadrado
1 x	Surface Indicator Gauge Small
1 x	Field folding model stand
1 x	250 mm / 16 mm Airbrakes
1 x	FUTABA 20 mm servo arm with ball link
1 x	Servo safety connector (10 pcs)
1 x	Futaba 50/60 mm servo pull-pull double arm with ball link
2 x	Futaba 46 mm servo arm with ball link
2 x	Futaba 25 mm servo arm with M3 ball link
1 x	Futaba 2x20 mm servo double arm
1 x	Rudder tandem for two Futaba servos
1 x	Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C
1 x	Futaba Prop Module F14
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Cable S.BUS 3 salidas 300 mm
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Switch moment button, 2 functions, long FUTABA
1 x	Antena FUTABA R7108/7014/7114SB (1 pc)
1 x	Cabel "Y" 30 cm (Futaba)
1 x	White aluminium 230 mm landing gear
1 x	Battery FUTABA 18MZ
1 x	White silicone 0,25 mm² wire (25 m)
1 x	SU 29S 140 carbon landing gear
1 x	Nose leg 155 mm with wheels 70 mm
1 x	4 LiPo XH>EH adapter
1 x	Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Indoor landing gear set
1 x	Long adjustable control horn 3x34
1 x	Long extra-strong control horn with bearing 2,8x34
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x	3 mm Short Prop Adapter M5
1 x	Couple M4 for wire (10 pcs)
1 x	Threaded coupler M2 (10 uds)
1 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Adapter 3,2 mm M8
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Adapter 4,0 mm M6
1 x	Tail wheel for 8-12 kg models
1 x	Tailwheel for F3A size
1 x	Long adjustable aluminium control horn 2,8x24
1 x	Ferrita con funda
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
1 x	Servo BMS-4112
1 x	Small aluminium horn gold (2pcs)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	19.5x13 Falcon electric 3-Blade carbon prop (54 g)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Adapter 3,0 mm M8
1 x	ORACOVER Ferrari red (2 m)
1 x	PropCover 16-20" (1 pcs)
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Horizontal servo holder
1 x	Hitec 25 mm servo arm with M3 ball link

5,130.22EUR