Top » Catalog » Hardware » Power supply system/Data Recordi » Jeti » JETCB3202+

534.01EUR

DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
[JETCB3202+]

JETI DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements.The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.

Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.

Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied R/C switch.

Recommended receivers
Two compatible RSat2 receivers are included. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

P-47 Thunderbird Deco 04
3,990.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

3 x	Motor A2212/13T
1 x	DUPLEX R10 receiver REX Assist
1 x	DUPLEX R10 receiver 2,4GHz
1 x	Battery FUTABA 18MZ
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	JETImodel Addcap 820
1 x	Switch Cap M (silver)
1 x	Transmitter Balancer Futaba V
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Receiver bed (Blue)
1 x	3l Smoke oil
1 x	30 cm BEC cable (male)
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Horn mando small (2 pcs)
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Smoke set "S"
1 x	Horn mando long (2 pcs)
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	Green silicone 0,25 mm² wire (25 m)
1 x	CC 05
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Ferrita 27x14x7 mm
1 x	LOWER TOW HOOK
1 x	Hovercraft sailcloth
1 x	1/4 Pilot "Heidi"
1 x	Protective Cover for wires Ø 3 mm 1000 mm
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Yellow smoke canister 100 g
1 x	Support Flush MPX Conector (6 pcs)
1 x	Support Filtro FESTO
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Fabric scissors curved Premium, 16 cm / 6" length
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	10m servo "Premium" wire (white/red/blue)
1 x	Piloto jet 130 mm
1 x	55% silver electrodes (2 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Extractor piñones 2.3/3.2 mm
1 x	5 line servos wire black (1 m)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
1 x	Profile ABS half cane 6.0x1000 mm
1 x	Conector FUTABA Servo female (10 pcs)
1 x	Conector JR Servo male (10 pcs)
1 x	Rubber profile 6-2 mm 2M
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Conector MR-60 (pareja)
1 x	Cable tie mounts 4.3 (4 uds)
1 x	90 mm rods + T patellas set for direction control
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Sensor DUPLEX 2.4EX MUI 200
1 x	DUPLEX R18 EX 2,4GHz + Rsat2
1 x	Receiver R7008HV comatible FUTABA
1 x	DUPLEX R14 receiver 2,4GHz
1 x	DUPLEX 2,4GHz MRPM-AC EX
1 x	Three-function control switch by FUTABA
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	FPV Station for SE TX-Tray V1
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Switch Cap M (red)
1 x	Futaba Aero Large Case - Internal Foam
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Futaba Neckstrap
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
1 x	Towing hook
1 x	VARIO module Hott
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Protective Cover for wires Ø 10 mm 1000 mm
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Digital scale up to 40 kg
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Dean "T" - Futaba Adapter
1 x	1/10 Pilot "Jack"
1 x	ABS tube 9.0x8.0x1000 mm
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	ABS tube 4.0x2.0x1000 mm
1 x	White smoke canister 140 g
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Soporte filtro FESTO (4 pcs)
1 x	6 mm M3 variable horn
1 x	R6106 HF 2,4 GHz receiver
1 x	Propeller balancer
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Adjustable launching hook
1 x	Digital precision scale up to 2000 g
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	ABS tube 5.0x3.0x1000 mm
1 x	Sun Cover PC 21 XXL (JMB Jets)
2 x	Xplorer3 anemometro
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Dean-T Plug Mold
1 x	1/6 Pilot "Cindy"
1 x	Support Pitot JETI
1 x	Soporte grifo FESTO (2 pcs)
1 x	Blind nut M2 (10 pcs)
1 x	Receptor FUTABA R3106GF T-FHSS
1 x	Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs)
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Receptor FUTABA R7003SB FASST
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Antena FUTABA RX 606/607/6014/2006/2008/3008/7006/7008, 2 pcs.
1 x	BEC 3A FOXY
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Cable grommet 9.5 mm (4 uds)
1 x	80 mm rods set for direction control
1 x	ABS angle 2,0x2,0x1000 mm
1 x	ASG 32 560 mm
1 x	Wingstabi 9 DR M-Link Receiver
1 x	Receiver DUPLEX R3L EX 2.4 GHz
1 x	DUPLEX R7 receiver 2,4GHz
1 x	Pitot tube JETI MSpeed DUPLEX
1 x	Propeller FIALA 15x8 3-Blade
1 x	DUPLEX 2.4EX RC Power Switch 10
1 x	DUPLEX 2.4 EX MVario2
1 x	Receiver DUPLEX REX 3 A20 2.4 GHz
1 x	MT 125 temperature sensor
1 x	FIALA Propeller 23x8 Electric
1 x	DUPLEX 2.4EX MFlow2 Gas 800
1 x	Multiplex True Air Speed + Vario Sensor to M-LINK
1 x	DUPLEX 2,4GHz MRPM EX
1 x	DUPLEX R7 receiver REX Assist
1 x	Receiver RFA05 5Ch compatible FUTABA
1 x	DUPLEX R7 REX receiver 2,4GHz
1 x	Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro
1 x	DUPLEX R7 REX receiver 2,4GHz A40
1 x	Suport PITOT
2 x	Antenna holder bracket double
1 x	Transmitter Balancer Futaba T-10CG
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Switch Cap L (Red)
1 x	Straightened threaded rod M3 - 1m
1 x	Switch Cap L (Blue)
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Futaba S-Bus Rx/Gyro Link Lead
1 x	Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x	Transmitter Balancer Futaba FF9-DX7-JR-Hitec
1 x	Contest-S-Pult-Carbon mc-20/mc-24
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Adap/Exten for Futaba 12-14C
1 x	Switch Cap M (black)
1 x	SWTU2 switch
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Switch Cap M (blue)
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Neck strap Double V2
1 x	Decorative caps, multicoloured, short
1 x	Charger FUTABA SQN30W12P-08 220v
1 x	Antenna Hole Cap V1 (Silver)
1 x	MULTIPLEX ALUMINUM CASE "M-LINK"
1 x	Remote electric ignition system
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x	White 2,4 GHz antenna exit guides (2 pcs)
1 x
1 x	Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x	Control horn long w/ball
1 x	Fabric scissors curved (offset handles), 16 cm / 6" length
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Support pumb/filter Xicoy X45
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	1/6 Pilot "Garry"
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Optical RPM Sensor
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	EC-Cutter
1 x	Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x	Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x	B4-0 rocket charges (6 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Electric rocket starters (6 pcs)
1 x	Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Cabel charger transmitter GRAUPNER
1 x	Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.)
1 x	Cut tube
1 x	ABS tube 10.0x8.0x1000 mm
1 x	Extra long horn 60x30
1 x	Towing hook <3m
1 x	Cable control set
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	Cable set PREMIUM , fuselage/wing one4one
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x	Receiver FUTABA R7108SB FASSTest/FASST
1 x	Round Rod 1,0x1000 mm
1 x	Blind nut M3 (4 pcs)
1 x	Horn DUBRO 1/2A
1 x	Dust collector for mould cleaning
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	6 mm red aluminium threaded horn with patella
1 x	Suncover 100cc Red
1 x	Battery charging cable XT60
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Dremel PERMAGRIT 18 mm round lime
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Piloto Jet "Red" 1/6 Scale
1 x	Horn 6/20 with M3 Bearing
1 x	15 mm floating pad (30 pcs)
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Field folding model stand
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Ventus 1:4 set of instruments
1 x	Receiver FUTABA R7014SB FASST Test
1 x	Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x	Fixed launching hook
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x	Red smoke canister 140 g
1 x	2,5x60 mm allen screwdriver
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Plastic caps for AIR BURTS (30 pcs)
1 x	Protective Cover for wires Ø 20 mm 1000 mm
1 x	CC 02
1 x	20 mm carbon horn
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Green smoke canister 140 g
1 x	100m servo "Premium" wire (white/red/blue)
1 x	Ferrita 14x8x5.5 mm
1 x	"S" set for boats
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	1/12 Pilot "Tom"
1 x	Crimping tool
1 x	2,0x50 mm allen screwdriver
1 x	Initior Transmitter FTX2 Wireless
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Parachute expulsion foam
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Stickers-digit for marking
1 x	Cable set PREMIUM, fuselage/wing
1 x	Blind nut M4 (4 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x	Adapter lead MPX/XT60
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	Receiver GRAUPNER GR-12 HoTT
1 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	ABS tube 5.0x4.0x156 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	USB Mini Camera endoscope
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Jeti Black cap
1 x	ABS tube 12.0x10.0x1000 mm
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Green smoke canister 65 g
1 x	Round Rod 5,0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Parachutist
1 x	ABS 500 x 400 x 1 mm (white)
1 x	Round Rod 4,0x1000 mm
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Buy Perforated film 100 cm / 20 m
1 x	Round Rod 1,5x1000 mm
1 x	Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel Receiver
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Adjustable brass horn threaded M3
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Cable with accesories
1 x	Horn for flap control (1 pcs)
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
1 x	Red smoke canister 65 g
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	ABS tube 8.0x7.0x1000 mm
1 x	CC 01
1 x	Concave-Convex sandpaper file 13 mm
1 x	200m servo "Premium" wire (white/red/blue)
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	1/6 Pilot "John"
1 x	Ventral support for AX-18/AX-60
1 x	Field folding model stand SebArt
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Ferrita con funda
1 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Round Rod 2,5x1000 mm
1 x	DYNAMOMETER S-1580
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Connector Sub-D 2+5 Male
1 x	Copier 5x20 cm pcs
1 x	Connector CAN 15
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Blind nut M5 (4 pcs)
1 x	PCARD Wireless System
1 x	ABS 500 x 400 x 0,5 mm (white)
1 x	Anodized aluminium servo M3x16 screw (4 red pcs)
1 x	Cable Cargador FUTABA
1 x	Fiberglass heat shield Ø 8 mm 1000 mm
1 x	6 mm aluminium horn with patella
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Receiver Futaba R1008SB 8-channel 2.4 GHz FHSS
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Green smoke canister 100 g
1 x	White smoke bombs AX-60 (5 pcs)
1 x	Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.)
1 x	Support conector MPX (6 pcs)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	White smoke canister 100 g
1 x	ABS tube 18.0x16.0x1000 mm
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Medidor ángulos y/o incidencias
1 x

13,142.94EUR