1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Indoor motor holder
1 x Ø 38 mm fiberglass motor-holder for electric motors
1 x Fiberglass motor-holder for electric motors
1 x Ø 40 mm fiberglass motor-holder for electric motors
1 x Electric coversion set
1 x Cooler motor type 280
1 x A60 Motor Mount Alu complete set
2 x Size "M" motor holder for class 600
1 x Ø 28 mm fiberglass motor-holder for electric motors
1 x Frontal support Speed 600
1 x Bearings for motor HACKER C50
1 x Fan for A60
1 x Size "M" motor holder for class 400
1 x Motor mount for 1 m models
2 x Central support Speed 600
1 x Motor holder AXI
2 x Cooler motor type 300
1 x Size "M" motor holder for class 400
1 x Frontal support Speed 400/480
1 x Frontal support Speed 280
1 x Radial heatsink for MPJ AC25/35-xx motor
1 x Metalic motor holder for class 550-600
1 x 
1 x Fiberglass motor-holder for electric motors
1 x Receiver bed (Blue)
1 x Cooler motor type 400
1 x Hacker A30-S Radial Set
1 x Starter EM Gear Power 80
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x Adaptadores carga 6s JST-XH
1 x Extension MPX-MPX 20 cm
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x Conector MR-60 (pareja)
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x Size "L" motor holder for class 600
1 x Motor mount M
1 x 
1 x 15 mm floating pad (30 pcs)
1 x 50 mm gas motor standoff
1 x 10 mm Quick clamp_L (6 pcs)
1 x 12 mm floating pad (49 pcs)
1 x 45 mm gas motor standoff
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Turbina KINGTECH K320 G5
1 x AXI 2820/14 V2
1 x AXI 2826/10 V2
1 x AXI 2826/12 V2 Long
1 x SunCover 50 Class (SebART)
1 x CESSNA 50E White/Red
2 x Tank ULTIMATUM 2.0 (3.2 L) + Smoke (0.9 L) PRO
1 x MOTOR MOUNT RODS AXI 53XX AND AXI 81XX 60MM (4PCS)
1 x AXI Cooler 41xx
2 x EVP Unit for AXI2208/xx and 2212/xx
1 x AXI 2826/6 V2
1 x AXI 2204 Multicopter
1 x AXI 2820/10 V2
1 x AXI 2808/24 V2 Long
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Quicklock washer 2 mm (10 pcs)
1 x Flat washer 3.2 mm (20 pcs)
1 x Lock washer 4.3 mm (20 pcs)
1 x Landing gear axle Ø 5 mm (2 uds)
1 x GM Propellers Spinner Scale ø 45mm Diameter, Motor shaft ø 6mm C
1 x GM Propellers Spinner Scale ø 42mm Diameter, Motor shaft ø 6mm C
2 x Landing gear axle Ø 6 mm (2 uds)
1 x GM Propellers Spinner Scale ø 40mm Diameter, Motor shaft ø 6mm C
1 x Radial Mount Set for AXI2814 and AXI2820 V2
2 x Set transmisions ULTIMATUM 2.0 (stainless/aluminium)
2 x Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts)
2 x Bags de Luxe ULTIMATUM 2.0
1 x Wing Joiner ULTIMATUM 2.0 m
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Axle for AXI 5325/xx motors
1 x Prop Saver for AXI 22xx/xx
1 x Axle for AXI 5330/xx motors
1 x Set Altimeter SHRead
1 x Brushes for VM 2014, 2020, 2028 motors
2 x Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re
2 x Set transmisions ULTIMATUM 2.0 (dura/aluminium)
2 x Set Stickers Ultimatum 2.0 - Andy Folienwelt
2 x Electric Landing Gear GS-200 ULTIMATUM 2.0 (Elektron Retracts)
2 x Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt
2 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
2 x Tank ULTIMATUM 2.0 (3.2 L) PRO
1 x 8 mm Adapter for AXI53xx
1 x Universal Prop Saver
1 x Spring lock washer 2.1 mm (20 pcs)
1 x Vess propeller 12x7 S
1 x Spring lock washer 3.1 mm (20 pcs)
1 x Quicklock washer 3.5 mm (10 pcs)
1 x Quicklock washer 1 mm (10 pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Flat washer 2.7 mm (20 uds)pcs)
1 x Landing gear axle Ø 8 mm (2 uds)
1 x Landing gear axle Ø 4 mm (2 uds)
1 x Flat washer 1.7 mm (20 pcs)
1 x Circlik for shaft 1.2 mm (10 pcs)
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Vess propeller 11x7 S
1 x Adhesive epoxy structures RESOLTECH 3350 (1 kg)
1 x Catalyst RESOLTECH 3357-T (0.45 Kg) Suitable for adhesive 3350/1
21,307.03EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies