4.50EUR

CA Glue fast 20g
[R1501032]


CA Glue fast 20g
Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Extension MPX-MPX 20 cm
Extension MPX-MPX 20 cm

temporarily out of stock
temporarily out of stock

Sparkplug NGK CM6
Sparkplug NGK CM6

temporarily out of stock
temporarily out of stock

TYGON tubo 1 m Diam. 3.4 x 2.0  mm
TYGON tubo 1 m Diam. 3.4 x 2.0 mm

temporarily out of stock
temporarily out of stock

Tygon tube 6.35 - 3.18 mm 1m
Tygon tube 6.35 - 3.18 mm 1m

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 23x8
Propeller MENZ-S 23x8

temporarily out of stock
temporarily out of stock

XT-60  connector (female)
XT-60 connector (female)

temporarily out of stock
temporarily out of stock

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Connectors banna oro 2 mm (M/F)
2 x Connectors banna oro 3 mm (M/F)
2 x Conector Servo female 4 pines
2 x Connectors DEANS (T) micro
1 x Bag connector 2 mm
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
2 x Conector JR Servo female (10 pcs)
1 x Conector FUTABA Servo male BLUE silicon (10 pcs)
2 x Connector CAN 15
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Conector FUTABA Servo female BLUE silicon (10 pcs)
2 x Connectors banna oro 8,0 mm (M/F)
2 x Connectors banna gold 5,5 mm (M/F)
3 x Connectors banna oro 4 mm (M/F) (ultralight)
2 x Conector BEC female (10 pcs)
1 x Conector FUTABA Servo female (10 pcs)
2 x Connectors banna oro 8,0 mm (Male) 5 pcs.
2 x Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x Banna gold connector 2,5 mm (M/F)
1 x Connectors banna oro 3,5 mm (M/F)
1 x Conector JR Servo male (10 pcs)
1 x 2 mm male connector (2 pcs) with safety connector
1 x Conector JR Servo male (10 pcs)
2 x Connectors banna oro 2 mm (M/F) (ultralight)
2 x Conector FUTABA Servo male (10 pcs)
2 x Conector BEC male (10 pcs)
1 x Connectors banna oro 0,8 mm (M/F)
3 x 2 mm female connector (2 pcs) with safety connector
1 x Connectors DEANS (T)
1 x 30 cm MULTIPLEX female connector
1 x XT-90 connector (pair)
2 x MPX housing with flange (4 pcs)
1 x MPX Support (2 pcs)
1 x Protector Connector Dean-T (1 pair)
2 x XH LiPo extension lead
1 x Contacto macho pin conector (10 pcs)
1 x XT-30 connector (pair)
2 x PIN Connector female (100 pcs)
1 x Wing conexion 2 servos Futaba 50 cm
1 x Wing connector 8pin with pin strip, plug & socket
1 x Kontronik connector (10 connectors, 5 pairs)
2 x Conector MT-60 (pair)
1 x Servo Connector Brackets (10 pcs)
2 x MPX Support
2 x Connectors MPX black male
2 x MR30 connector male
1 x Protector Connector MPX (1 pair)
1 x MPX PCB "4 Pins", 5 pieces
1 x MPX PCB "Gender-Changer (5 pcs)
1 x Red 3m5 mm connector holder
1 x MPX PCB "6 Pins", 5 pieces
1 x MPX screwable clips (4 pcs)
1 x Parachute P4
1 x Rescue 1,8m2 / BackPack
1 x Paramotor BackPack XXS 2
1 x Windsock Ozone L -1200 mm
1 x Parachute BACKUP X100
1 x Paramotor Trike XL
1 x Opale Rucksack
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Wing OXY 5,0 m2
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x MPX-Dean "T" Adapter
1 x CM-3
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x 3 LiPo XH>EH adapter
1 x 2 LiPo XH>EH adapter
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x BEC 3A FOXY
1 x 4 LiPo XH>EH adapter
1 x CC 05
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Circlick securite
1 x Oratex Natural White 20m
1 x 1/12 Pilot "Langley"
2 x Connectors DEANS 4 pins (1 pair)
1 x 9x4.7 * 22x12 carbon propeller
1 x Metalic nose for PROJETI
1 x XH female balance (2S) connector (2 pcs)
1 x Motor mount class 48"
1 x XT-60 connector (female)
1 x Servo NARO Max Std
1 x XH male balance (4S) connector (2 pcs)
1 x Nose OPTIMA 2.200 mm (Elec or Glider)
1 x XH female balance (3S) connector (2 pcs)
2 x Landing gear retract neumatic (Jet Legend)
2 x XH male balance (5S) connector (2 pcs)
1 x XH female balance (7S) connector (2 pcs)
1 x Gold antispark 5,5 mm plug
2 x Connectors banna oro 4 mm (M/F)
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon fiber rod 6.0 mmx1000 mm
3 x Carbon fiber rod 1.5 mm x 1000 mm
1 x VPP system propeller for AXI VPP motors (spare)
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x XH male balance (2S) connector (2 pcs)
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x Connectors banna oro 6,0 mm (M/F)
2 x SE Ring 240 mm (2 pcs)
1 x Ring 320 mm length (5 pcs)
1 x SE Ring 360 mm (2 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Brass control horn M2 large for wire (2pcs)
1 x Horn 20x28,5 mm (2 pcs)
1 x Horn with ball 40x30
1 x Horn DU-BRO 1/2 (2 pcs)
1 x Horn DUBRO 1/2A
3 x Ferrita con funda
1 x Carbon fiber rod 7.0 mmx1000 mm
3 x Ferrita 17x10x6.5 mm
1 x XH male balance (3S) connector (2 pcs)
1 x Landing gear axle Ø 5 mm (2 uds)
2 x Spare Part Frame Set for EACHINE RACER 250
2 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
4 x Canopy Latch
1 x Flap hinge (6 pcs)
3 x 40,0 mm hydro-propeller (left hydropropeller)
1 x Threaded coupler M2 (10 pcs)
1 x KONDOR 15-92
3 x Brass rod Ø 1.5 mm x 1000 mm
2 x Brass rod Ø 0.5 mm x 1000 mm
2 x Beech dowels 3.0 x 1000 mm
1 x Contest-S-Pult-Carbon mc-20/mc-24
1 x Aluminium sheet 500x250x0,5mm
1 x Bearing block for noseleg landing gear
3 x Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x Foam plastic plates (310x210x3 mm)
2 x Carbon fiber rod 5.0 mmx1000 mm
2 x Beech dowels 2.0 x 1000 mm
3 x Conector JAPAN G2 Set 5 pares
2 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
2 x Foreman, scale 1:32
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x Foam plastic plates (310x210x2 mm)
2 x 40 mm 1/4" Race propeller (rigth hydropropeller)
2 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
2 x Decorative caps, multicoloured, short
2 x Distanzstück motor OS 120 AX
2 x Foam plastic plates (310x210x5 mm)
2 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
2 x Brass hexagonal rod Ø 5 mm x 1000 mm
2 x Flap hinge 33x9 mm (6 pcs)
1 x XPower XC3522/5 LS
1 x MAMBO 17
1 x XPower XC4226/12 LS
1 x KIRA 480-43
1 x FesEx-Uni6 System
1 x KIRA 480-34 5,2:1
1 x KIRA 600-38 6,7:1
1 x Motor A30-10 XL V4
1 x PYRO 900-52L
1 x Cable with accesories
1 x Program 5v SIO RS 232
1 x Brass control horn M4 short for wire (4 pcs)
1 x 45 mm white plastic spinner for fixed propeller
1 x PYRO 700-45
1 x PYRO 800-48 Long Axi
1 x PYRO 650-103 Long Axi
1 x Shaft for A60-L V4
1 x Motor A60-6XS V4 28-pole kv370
1 x Motor A50-16 S V4
1 x A40-10S V2 8-Pole + 6,7:1 PG
1 x Motor B40-10 L
1 x Motor A50-14L Turnado V3 Glider
1 x Motor A40-14 L 14-Pole V4
1 x Motor A40-10 L V2 14-Pole Glider
1 x Motor A200-6
1 x Radial mount for electric 2.5-5.6
2 x SERVO DES 588 BB MG
3 x Ferrita 27x14x7 mm
1 x Conector JR Servo female (10 pcs)
1 x Propeller CFK 16x13
1 x SE Ring 350 mm (2 pcs)
1 x Cinta Goldfix 1m
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Conector XT-150 6mm (Set: 5 pares)
1 x 20x1000 mm Ring Strap Back To Back
1 x Magnetic Connect locking system
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Propeller CFK 15x7
1 x Propeller CFK 15.5x10
1 x 
1 x Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x Propeller CFK 12.5x7
1 x Propeller RF CFK 10x17
1 x Conector male bateria 1s Kavan/Walkera 10cm cable
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Propeller CFK 12X6
1 x SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x Horn with ball 55x40
1 x Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
2 x Ferrita 14x8x5.5 mm
1 x Propeller 10x4,7 SlowFlyer
1 x KIRA 400-39 5,2:1
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon fiber rod 14 mmx1000 mm
1 x XH female balance (8S) connector (2 pcs)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Propeller CFK 15x13 Slim
1 x Connectors MPX 8 pins with support (black) 1 pair (male-female)
1 x Tape GFK 25 mm
1 x SE Ring 480 mm (2 pcs)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Conector XT-30 (hembra)
1 x XH female balance (6S) connector (2 pcs)
1 x Propeller CFK 15x13
1 x Connectors MPX male (PIN double)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Small aluminium horn gold (2pcs)
1 x Long adjustable control horn 3x34
1 x Small aluminium horn blue (2pcs)
1 x 6 mm blue aluminium threaded horn with patella
1 x 140 mm rods + T patellas set for direction control
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x Long extra-strong control horn with bearing 2,8x34
1 x Small aluminium horn red (2pcs)
1 x Rudder forward 80x28 "type Kato"
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x 80 mm rods set for direction control
1 x Horns indoor
1 x 45 mm rods set for direction control
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x 45 mm rods + T patellas set for direction control
1 x Rudder forward 90x28 "type Kato"
1 x Short extra-strong control horn with bearing 2,8x15
1 x 100 mm rods set for direction control
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x LH long aluminium horn L31xH30 (2pcs)
1 x Micro control horn T2 Ø 1
1 x Long adjustable control horn with bearing
1 x Long adjustable aluminium control horn with bearing 2,8x15
1 x Long horn 50x26
1 x 100 mm rods + T patellas set for direction control
1 x Indoor hinge with servo arm integraded
1 x Long adjustable aluminium control horn 2,8x24
1 x PT 21x13 EL Propeller 3 Blade
1 x Epoxy QUIK-CURE™ 5 min (130g)
1 x Propeller CFK 18x17
1 x Propeller CFK 13x9
1 x 20x200 mm battery rings
1 x SERVO DES 658 BB MG
1 x POLARON EX 800w charger
1 x MZ-18, 9 Channel HoTT
1 x SERVO DES 707 BB MG, Pignons
1 x Receptor GRAUPNER GR-24 HoTT
2 x Adjustable brass horn threaded M3
1 x Propeller CFK 11x8
2 x Carbon fiber rod 0.5 mmx1000 mm
1 x Propeller Pleg CAM-Prop 10x6 + Spinner
2 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Motor A20-20 L EVO
1 x 6 mm M3 variable inclined horn
1 x Wing bolts M3 Steel screw Red (2 pcs)
1 x Epoxy FINISH-CURE™ 20 min (130g)
1 x Motor Mega AC 16/15/07 COMBAT
1 x Actuador lineal HLS12-100210-7.4v
2 x Decorative caps, multicoloured
2 x Transmitter Crystal 35 Mc/s Ch 62
1 x Soporte metal para servos
1 x Hose clips 6 mm
1 x VARIO module Hott
1 x SERVO DES 806 Pignons
2 x Receiver Crystal 35 Mc/s Ch 62
1 x Propeller Pleg CAM-Prop 8x6
1 x Receiver replacement antenna, approx. 15
1 x Spinner fixed propeller 60 mm / 5,0 mm
1 x Servo HBS 690BB HV Digital
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Propeller G-Sonic 20x8
1 x Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x Coupling bush 5 - 5 mm
1 x Charger LiPo Charger4
15,316.23EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies