Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

16x8 BIELA propeller (3-blades) Pusher
68.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Optical RPM Sensor
1 x	2 LiPo XH>EH adapter
1 x	TrainerCord (master-learner)
1 x	4 LiPo XH>EH adapter
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	APM2.6 Power module with 5.3V DC BEC
2 x	Adapter lead MPX/EC3
1 x	CM-3
1 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	Black copper lacquer wire Ø0,2 mm (5 m)
2 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
2 x	MPX-Dean "T" Adapter
2 x	3 LiPo XH>EH adapter
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	DUPLEX 2.4EX Central Box 210
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Profile ABS half cane 2.0x1000 mm
1 x	Jeti Box mini
2 x	CellPRO 4S Adaptader (GP/KO up to 4S)
4 x	Servo KST A08H V6.0 3,2Kg HV
1 x	Extension 5 lipos JST - JST/C
1 x	JETImodel SINGLE BEC
1 x	Switc electronic 30 Amp
1 x	Magnetic Interruptor MULTIPLEX
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	CC 02
1 x	SBEC Jeti
1 x	Extension 5 lipos JST/C - JST
1 x	PSC 6
1 x	SWTU2 switch
1 x	90x60 mm standart servo cover
3 x	PSC 5
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	120x60 mm SLH KOVO wheel
2 x	MAX BEC 2D plus EX
1 x	UBEC 6A KAVAN
1 x	Extension 2/3 lipos JST/C
1 x	30 cm BEC cable (male)
1 x	USB interface ALTIS
1 x	Male Prolonger TP 4/5S
2 x	Servo slow down unit (0,7-14,7 sec )
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	SPS 70V 100/200 A
1 x	MAX BEC
1 x	SBEC 40
1 x	Opto Gas Engine Kill Switch
1 x	JETImodel DPS 40
1 x	Multi-adapter balancer JST/C - TP
1 x	Multi-adapter balancer JST - TP
1 x	Hitec 38 mm servo arm
1 x	Futaba 46 mm servo arm with ball link
1 x	Servo SAVOX SW-1250 MG digi
1 x	Futaba 20 mm servo arm
2 x	SE Ring 450 mm (2 pcs)
1 x	Crystal Universal RX 35.090 Ch 69
1 x	Marker ties (20 pcs)
1 x	Servo Robbe FS 525 BB MG HV
1 x	Servo SAVOX SV-1261 MG
1 x	Transmitter Crystal 35 Mc/s Ch 77
1 x	Crystal TX 35.100 Ch 70
1 x	Servo mounting frame SV-1260MG
1 x	Servo HS-5565MH High Voltage
1 x	Servo HITEC HS-45 HB, servo box
1 x	SE Ring 360 mm (2 pcs)
1 x	Futaba 54 mm servo arm with ball link
1 x	Servo JETI DSHV 3D13T (13 Kg)
1 x	Servo case HS-225MG/225BB/5245MG
1 x	Spinner plastic red fixed propeller 30 mm
1 x	40 mm white plastic spinner for fixed propeller
1 x	Propeller POWER-PROP 7x7
1 x	Spinner plastic black fixed propeller 30 mm
2 x	Spinner fixed propeller 42 mm / 5,0 mm
1 x	45 mm black plastic spinner for fixed propeller
2 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Connector CAN 15
1 x	Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x	100m servo "Premium" wire (white/red/blue)
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	50 mm servo arm with bearing (2 pcs)
1 x	POWER PEAK D7 EQ-BID 12V/230V-Duo Charger
1 x	TMM 1210-3S heli
1 x	Tape GFK 25 mm
2 x	Foil for sticking flaps and ailerons
2 x	SE Ring 350 mm (2 pcs)
1 x	SPARK Switch 5.9v
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	Y-Hose connector 4mm
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Dean "T" - Futaba Adapter
1 x	Adapter lead MPX/XT60
1 x	QUANTUM II 55 Brushless Motor
2 x	SE Ring 330 mm (4 pcs)
2 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Motor mount M
2 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x	YAK-23 "FLORA" (RBC Kits)
2 x	Cooler motor type 150
2 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Servo KST MS825 V8.0 35kg 8.4v
3 x	Soporte servo KST X08/H and Plus
1 x	Frontal support Speed 280
2 x	Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
1 x	Motor holder AXI
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Metalic motor holder for class 550-600
1 x	TMM 2512-3S heli
1 x	SERVO DES 806 Pignons
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x	Servo KST BLS915 HV V8.0 25Kg 20mm 78g
1 x	Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg
1 x	Servo KST X10-710 V8.0 7.5Kg HV
1 x	Axle wheel with accesories
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x	Motor holder for AC 28/7
1 x	Electric coversion set
1 x	Hacker A30-S Radial Set
1 x	Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
2 x	Servo KST DS125MG servo ala 10mm 28g 7Kg
1 x	20x1000 mm Ring Strap Back To Back
1 x	Set montaje amortiguador para modelos 8-16 Kg
1 x	SE Ring 480 mm (2 pcs)
1 x	Size "M" motor holder for class 400
1 x	Ø 40 mm fiberglass motor-holder for electric motors
2 x	Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
1 x	10 mm gas motor standoff
1 x	Servo KST X20-7512 V8.0 82kg 8.4v
1 x
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x	SE Ring 300 mm (2 pcs)
1 x	Servo KST X08 Plus 9g HV servo
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Frontal support Speed 600
1 x	Spikes Band (5 m)
1 x	Radial heatsink for MPJ AC25/35-xx motor
1 x	Servo KST BLS905X HV V2.0 8Kg 20mm
1 x	A50 Motor Mount Alu complete set
1 x	Motor mount for 1200 mm models
1 x	Ring 320 mm length (5 pcs)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x
1 x	Set freno para ruedas Dia. 127 mm
1 x	Bearings for motor HACKER C50
1 x	Motor mount for 1 m models
1 x	SE Ring 200 mm (2 pcs)
1 x	Ø 38 mm fiberglass motor-holder for electric motors
1 x	Frontal support Speed 400/480
1 x	Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Central support Speed 280
1 x	Servo KST X15-1208 V8.0 13.5Kg HV
1 x	Fiberglass motor-holder for electric motors
1 x	Tape GFK 38 mm
1 x	Servo KST BLS825 V8.0 HV 35Kg 8.4v
1 x	Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x	Central support Speed 600
1 x	Metal ring front FEMA
1 x	Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x	Cooler motor type 400
1 x	Cinta Goldfix 1m
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	A60 Motor Mount Alu complete set
1 x	Receiver bed (Blue)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Size "M" motor holder for class 600
1 x	Indoor motor holder

6,576.80EUR