Top » Catalog » Planes » Gasoline-Glow » Acrobatics » PILOTPITTS8702

1,559.99EUR

PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF
[PILOTPITTS8702]

Pilot-RC’s first ever biplane! And it could be no other than the classically beautiful Pitts Challenger.
Fear not about long setup times of traditional biplanes, Pilot-RC’s innovative and patented systems allow you to have the model completely put together in under 5 minutes, to then unleash the acrobatic and 3D monster that our Pitts.

FEATURES:
NEW! Pilot-RC’s first ever biplane! Years of experience poured into a new design SPECIAL NEW! Pilot-RC new and patented quick release system for fast wing mounting at the field.
Special Pilot-RC no screw canopy. Quick release with new security latch design.
Strong but light, specially developed for precision acrobatic and extreme 3D flying
Genuine German Oracover (Ultracote) covering
Highly prefabricated, experienced builders can have air ready in under a day
Pre-installed hinges (glued and pinned)
Internally mounted cowling – so no external screws exposed
Removable wings , wing stut and stabs.
Laser engraved motor mounting position

INCLUDED HARDWARE:
Complete air frame with all basic accessories (such as carbon fiber main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
Pre-installed hinges and pre-mounted canopy
Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
Wheels, axels and wheel pants
Pre-prepared pushrods with ball links
Matching carbon spinner

REQUIRED HARDWARE
Motor: 100-120cc
Servos: 7-8 high torque plus throttle // Uses x1 per aileron (total x4), x1 per elevator and x1 or x2 on rudder
Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories…

SPECIFICATIONS:
Model: Pitts Challenger
Wingspan: 87″ (2,200mm)
Length: 79″ (2,000mm)
Wing area: 2,265 “² (1,465 cm²)
Weight: 29.4lbs (13.4kg)

under request

Reviews

Quick Find

Shopping Cart

1 x	Motor DLE 200cc Std
1 x	Motor DLE 200cc Premium Muffler
1 x	Silent-blocks DLE 170M
1 x	Small Crow DLE-170M
1 x	Motor DLE 430 cc - Paramotors
1 x	Metalic nose for PROJETI
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	DLE 55 Muffler
1 x	CILINDER FOR DLE55, DLE111, DLE222
1 x	Canister combo DLE 120 cc
1 x	Muffler DLE 20-RA
1 x	Canister combo DLE 111 cc
1 x	Piston ring for DLE-30
1 x	Muffler DLE-120 Left
1 x	CENTRAL PROPELLER BOLT FOR DLE85/111/120
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Servo GO-1023MG 7.0 kg.cm 0.09s/60º
1 x	Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x	20-25mm Servo Arm
1 x	Battery charging cable XT60
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	Premium servo extension 75cm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	500 ml sealer (DOPE)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Indoor hinge with servo arm integraded
1 x	Plasti Dip Liquid Tape 429 ml orange
1 x	Extension lead 15 cm Multiplex
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Partall paste 650 g
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	White silicone 0,25 mm² wire (25 m)
1 x	Silicone 0,35 qmm servos wire Graupner(100 m)
1 x	Extension 90 cm (Futaba)
1 x	Extension silicon 100 cm (Futaba)
1 x	Strip 2,5x1,25x330 mm
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	Spray EC Red 400ml
1 x	Nitroverdu 500 ml
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Cable Cargador FUTABA
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Round Rod 4,0x1000 mm
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Glases Stratus
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Receiver bed (Blue)
1 x	Decorative caps, multicoloured
1 x	Futaba male 40 cm extension
1 x	GPS Sensor + Logger OPTronics
1 x	HOPPER tank Digitech 250 ml (Festo nipples 6 mm)
1 x	Wing Joiner ULTIMATUM 2.0 m
1 x	Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	X-RAY Micro QR (Tail Tube)
1 x	FesEx-Uni8 System
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Silicone red 0,25 mm² wire (25 m)
1 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	Charger FUTABA SQN30W12P-08 220v
1 x	Glases Innovation Plus
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
1 x	Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x	SWTU2 switch
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Medium pin type hinge (12 uds)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Round Rod 1,5x1000 mm
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	White silicone 0,25 qmm wire (100 m)
1 x	MULTIPLEX ALUMINUM CASE "M-LINK"
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Glases Ace
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	Round Rod 6,0x1000 mm
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Interface Realflight Simulator
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Futaba Neckstrap
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Strip 3,5x1,75x330 mm
1 x	TX-Tray V1 (L) (Black)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Cabel "Y" 30 cm (graupner)
1 x	Profile ABS half cane 3x1000 mm
1 x	Starter 12v (Max 180 and 30ccm)
1 x	XH male balance (2S) connector (2 pcs)
1 x	Conector BEC male (10 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	SERVO HOLDER
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	6 mm aluminium horn with patella
1 x	Beech dowels 3.0 x 1000 mm
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Xplorer3 anemometro
1 x	Horn 5/15 with M2 Bearing
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Green smoke canister 140 g
1 x	One touch canopy lock
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Connectors banna oro 3 mm (M/F)
1 x	Adaptadores carga 6s JST-XH
1 x	Xplorer2 anemometro
1 x	Vacuum pump 12 CFM
1 x	eFuel 30A Power Supply
1 x	Propeller Pleg CAM Carbon 10x12
1 x	Propeller Pleg CAM Carbon 11x6
1 x	Propeller Pleg CAM Carbon 10.5x6
1 x	Propeller Pleg CAM Carbon 14x10
1 x	Propeller Pleg CAM Carbon 15x13
1 x	Propeller Pleg CAM Carbon 14x7
1 x	Propeller Pleg CAM Carbon 15x6
1 x	Propeller Pleg CAM Carbon 13x10
1 x	Propeller Pleg CAM Carbon 10x6
1 x	Propeller Pleg CAM Carbon 12x6.5
1 x	Tank ULTIMATUM 2.0 (3.2 L) PRO
1 x	Set transmisions ULTIMATUM 2.0 (dura/aluminium)

16,997.57EUR