Top » Catalog » Motors & Turbines » Electric » Brushless » KAVAN » KAV30.1638C

120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
  Turbines->
  Electric->
    Brusehd->
    Brushless->
      Actro
      AXI->
      FOXY/RAY
      Glavak
      Hacker
      Hacker FES System
      JETI
      KAVAN
      Kontronik->
      Mega
      MP Jet
      MULTIPLEX
      MVVS
      O.S.
      Plettemberg
      RIPMAX
      ROI-Import
      Scorpion Motor
      T-Motor
      Top Model CZ
      Typhoon
    Accesorios
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

ULTIMATUM 2.0 PRO "Joker 5N"
2,900.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Hovercraft sailcloth
2 x	Servo NARO Max Std
2 x	Glases Ace
2 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
2 x	Glases Innovation Plus
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Universal Colour Paste deep black 50 g
1 x	Large flex hinge (12 uds)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Motor Mega AC 16/15/02
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Motor Mega AC 16/25/03
1 x	Spray adhesive AEROFIX 2
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Motor Mega AC 22/30/03
1 x	Motor Mega AC 16/25/01E 3.17mm
1 x	Motor Mega AC 16/25/02
1 x	Motor Mega AC 16/15/05 CE F5J
1 x	Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x	Adjustable launching hook
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	10 mm dogdrive props
1 x	290 mm M4/M4 6.0x4.0 mm shaft ship
1 x	31,0 mm propeller (rigth propeller)
2 x	14 mm portholes (10 pcs)
1 x	Alfileres de cobre 0,7 x 7 mm, aprox.50 g
1 x	Conector JR/Uni Servo female BLUE silicon (10 pcs)
2 x	28 mm turnbuckle
1 x	Conector male bateria 1s Kavan/Walkera 10cm cable
1 x	Conector JR Servo male (10 pcs)
1 x	Fiberglass motor-holder for electric motors
1 x	Cooler motor type 400
1 x	12x6 tree blades propeller
1 x	1/12 Pilot "Cougar"
1 x	1/10 Pilot "Jimmy"
1 x	Glases Aspen
1 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Motor Mega AC 16/25/04
1 x	Micro flex hinge (12 uds)
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	METEOR 1.000 mm kit
2 x	Spray YELLOW Inca Lexan 150ml
1 x	LOWER TOW HOOK
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Aeronaut Baumbeschlag (Ms) 10 mm
1 x	300x4 mm M4 shaft ship
1 x	Connectors banna oro 2 mm (M/F)
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	25,0 mm 3-BL M4 hydro-propeller (left hydropropeller)
1 x	12 mm dogdrive props
1 x	Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x	Conector JR Servo male (50 pcs)
1 x	3 mm Leader (L 100 mm)
1 x	Conector MT-60 (pair)
1 x	Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x	12 mm mast holder
1 x	290 mm M5 Prop shaft
1 x	Conector Servo female 4 pines
1 x	10 mm portholes (10 pcs)
1 x	Conector MR-60 (pareja)
1 x	60 mm aluminium spinner (Kavan)
1 x	Radial mount for electric 2.5-5.6
1 x	Actro 32-3 Heli MAX 5mm
1 x	Combustible Glow "KAVAN" air/heli 5% nitro
1 x	PYRO 900-52L
1 x	KIRA 400-34
1 x	Propeller CFK 12.75x13
1 x	Propeller RF CFK 16x8,5 S
1 x	Propeller CFK 15x13 Slim
1 x	Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x	Size "M" motor holder for class 400
1 x	Propeller CFK 14x8
1 x	"Taxi Tank" Fuel Tank
1 x	110x55 mm C SLH KOVO wheel
1 x
1 x	2 mm Prop Adapter M5
1 x	Glases Nimbus
1 x	Glases Moritz
2 x	Glases Stratus
1 x	Glases Flitemaster
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Small pinned hinge (12 uds)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	Motor Mega AC 16/15/07 COMBAT
1 x	Hobbylite Filler, Balsa colour
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Motor Mega AC 16/35/01
1 x	Mega Motor RC 400 F5J 1950KV
1 x	Motor Mega AC 16/07/06
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Spannlack 1000 ml
1 x	Gates hinge
1 x	800TVL CMOS camera for FPV
1 x	Motor Mega AC 16/07/04
1 x	Nitroverdu 500 ml
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Motor Mega AC 16/15/04
1 x	Motor Mega AC 16/25/04 COMBAT
1 x	Gates hinge aluminium (1 pcs)
1 x	Universal Colour Paste deep black 250 g
1 x	Paint gun for sprays
1 x	Flap hinge (6 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	15 mm reinforced hinge
2 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Motor Mega AC 22/45/03 E
1 x	GM Propellers Folding propeller Scale 20x13 Carbon 1 pair
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	Tow hook for tug
1 x	Towing hook
1 x	Towing hook <3m
1 x	Fixed launching hook
1 x	Banna gold connector 2,5 mm (M/F)
1 x	30 cm DEANS female connector
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	25 mm fenders (10 pcs)
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Conector FUTABA Servo male (10 pcs)
1 x	290 mm M4/4 mm Prop shaft
1 x	33,0 mm propeller (left propeller)
2 x	29,0 mm propeller (left propeller)
1 x	30 cm MULTIPLEX female connector
1 x	270 mm 3/3 mm shaft ship
1 x	Conector XT-30 (hembra)
1 x	40 mm 1/4" Race propeller (rigth hydropropeller)
1 x	25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x	Conector JR Servo female (50 pcs)
1 x	2 mm male connector (2 pcs) with safety connector
1 x	42,0 mm propeller (rigth propeller)
1 x	Bag connector 2 mm
1 x	Connectors banna oro 3 mm (M/F)
1 x	75 mm
1 x	33,0 mm propeller (rigth propeller)
1 x	14 mm Portholes for screws (10 pcs)
1 x	290x4 mm M4 shaft ship
1 x	Conector FUTABA Servo female (10 pcs)
1 x	38 mm fenders (10 pcs)
1 x	261 mm M4/M4 6.0x4.0 mm shaft ship
1 x	39,0 mm propeller (rigth propeller)
1 x	Connector CAN 15
1 x	Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	36,0 mm propeller (rigth propeller)
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	KIRA 480-38
1 x	DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV)
1 x	Combo RAY C3542-1000 + ESC 60A
1 x	KIRA 600-17
1 x	PYRO 800-40 Long Axi
1 x	DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV)
1 x	KIRA 500-36 6,7:1
1 x	45 mm aluminium spinner (Kavan)
1 x	Charger SKY RC e680
1 x	KIRA 600-16
1 x	Concave-Convex sandpaper file 13 mm
1 x	KIRA 600-20
1 x	KIRA 400-39 5,2:1
1 x	BETA 1400 RTF Red
1 x	Ciano KAVAN Super Thin 20g
1 x	55 mm aluminium spinner (Kavan)
1 x	KIRA 600-38 6,7:1
1 x	BETA 1400 ARF Red
1 x	Motor MVVS 5.6/690 GLIDER
1 x	PYRO 700-45
1 x	QUANTUM II 55 Brushless Motor
1 x	KIRA 480-31 5,2:1
1 x	Blade holder metal LAMA
1 x
1 x	Adaptadores carga 6s JST-XH
1 x	PYRO 650-103 Long Axi
1 x	KONDOR 15-92
1 x	10 mm aluminium spinner (Kavan)
1 x	10 mm gas motor standoff
1 x	Cables suitable for the motor AC 28/7
1 x	2,3 mm Prop Adapter M6
1 x	3 mm Prop Adapter M6
1 x	Propeller CFK 20x13 "white"
1 x	3 mm Prop Adapter M6
1 x	15x7 tree blades propeller
1 x	Propeller CFK 15x7
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	Propeller CFK 18x17
1 x	Propeller RF CFK 13x7
1 x	3,2 mm Prop Adapter M8
1 x	Propeller CFK 14x7
1 x	Motor Mount for Multiplex FunJet
1 x	Propeller CFK 11x8
1 x	2.3 mm Adapter for 30 mm spinners
1 x	PHASOR RACE 2035/2100 2D
1 x	Propeller CFK 12.5x6.5
1 x	3.2 mm Prop Adapter M6
1 x	Fan for A60
1 x	Cooler motor type 280
1 x	Propeller CFK 17x18
1 x	Motor mount M
1 x	A60 Motor Mount Alu complete set
1 x	Metalic motor holder for class 550-600
1 x	Frontal support Speed 280
1 x	Propeller CFK 17x13
1 x	Ø 38 mm fiberglass motor-holder for electric motors

11,236.71EUR