Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Emisora Spektrum NX10 10ch (solo Tx)
619.92EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 15 m
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 10m
1 x	Fibra carbono tela 160g/m2 127 cm x 1 m
1 x	Cinta carbono TeXtreme 38 g/m2 IM UD 20mm x 100 m
2 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 30 mm, 100m
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
2 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 50m
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs)
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Fibra carbono tela 160g/m2 100 cm x 5 m
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Fibra carbono tela 160g/m2 127 cm x 10 m
1 x	Fibra carbono "MANGA" 12k 170 mm x 5 m
2 x	AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs)
2 x	AIREX® M060 lámina (amarilla) 1200x550x6,0 mm (5 pcs)
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 100m
1 x	Cinta fibra carbono 50 mm 3k 200 g/m2 x 10m
1 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 100m
1 x	Cuña desmoldeo roja (5 pcs) [40x20mm]
1 x	Fibra carbono tela 160g/m2 100 cm x 10 m
1 x	Cinta fibra de vidrio 49 g/m2 5cm x 100m (plain weave)
1 x	Fibra carbono tela 160g/m2 100 cm x 25 m
1 x	Bolsa vacio 1200 mm x 50 m
2 x	Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 22 rollos
1 x	Listón triangular de BALSA 10x10x1000 mm
1 x	Listón de PINO 3,0x5,0x1000 mm
1 x	Listón de HAYA redondo 4,0 x 1000 mm
1 x	Listón de CAOBA 3,0x3,0x1000 mm
2 x	Liston de BALSA 10 x 10 x 1000 mm
1 x	Listón OBECHI 2,0x3,0x1000 mm
1 x	Listón triangular de BALSA 8x8x1000 mm
1 x	Listón de BALSA 4,0x4,0x1000 mm
1 x	Listón de PINO 2,0x2,0x1000 mm
2 x	Listón de PINO 3,0x10,0x1000 mm
1 x	Listón triangular de BALSA 6x6x1000 mm
2 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Listón de BALSA 2,0x2,0x1000 mm
1 x	Listón de PINO 5,0x5,0x1000 mm
4 x	Listón de BALSA 3,0x3,0x1000 mm
2 x	Listón de HAYA redondo 2,0 x 1000 mm
1 x	Listón de BALSA 5,0x5,0x1000 mm
1 x	Listón de PINO 6,0x6,0x1000 mm
1 x	Listón de HAYA redondo 10 mm x 1000 mm
1 x	Listón de PINO 1,5x3,0x1000 mm
2 x	Listón de NOGAL 3,0x3,0x1000 mm
1 x	Listón triangular de BALSA 15x15x1000 mm
1 x	Varilla carbono 5.0 mmx1000 mm
1 x	Piloto "Duke" Legends Series(Slimline)
1 x	Conector equilibrado XH (4S) hembra (2 pcs)
1 x	Anemometro Xplorer1
1 x	Cera desmoldemante "Alta Temperatura" 340g
1 x	Conjunto bieleta 140 mm para dirección
1 x	Bisagra pin 26x11 mm (10 uds)
1 x	Varilla acero Ø 2,5 mm x 1000 mm
1 x	Soporte Pitot JETI
1 x	Plancha fibra vidrio 620x540x3,2 mm
1 x	Soporte Filtro FESTO
2 x	Fibra de vidrio picada 3mm (200g)
1 x	Fibra de vidrio 25 g (2 m²)
1 x	Fibra vidrio 80g/m2 (100cm x 1m) cruzada
1 x	Enganche de las palas del rotor
1 x	Tuerca M1,6
1 x	Palanca de dirección
1 x	Soporte cental de las palas del rotor GFK 0,5 mm
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Fibra carbono tela 160g/m2 127 cm x 5 m
2 x	Acople ALU Izda. M2,5 Ø 3 (2 uds)
2 x	Set acople ALU M2,5 Ø 4 (2 uds)
2 x	Horn 16,5x20 mm (2 pcs)
1 x	Cable con accesorios
1 x	Horn con ball 55x40
2 x	Acople ALU M3 Ø 4 (2 uds)
1 x	Horn aluminio pequeño rojo (2pcs)
1 x	Horn mando small (2 pcs)
3 x	Horn mando long (2 pcs)
1 x	Carro remolque para veleros 720 x 285 mm
3 x	Medidor ángulos
1 x	Tester LiPo/LiIon/LiMn/LiFe
1 x	Bisagra 15 mm reforzada
1 x	Liston de BALSA 8,0x8,0x1000 mm
1 x	Plancha contrachapado Abedul 600x300x1,2 mm
1 x	Plancha contrachapado Abedul 600x300x2,0 mm
1 x	Listón de CAOBA 1,5x1,5x1000 mm
1 x	Listón de BALSA 3,0x5,0x1000 mm
1 x	Plancha contrachapado Abedul 600x300x4,0 mm
1 x	Liston de BALSA Borde ataque 8 x 10 x 1000 mm
1 x	Listón de PINO 2,0x10,0x1000 mm
1 x	Bisagra de Flaps 33x9 mm (6 uds)
1 x	Plancha de goma espuma (310x210x5 mm)
1 x	Rueda de cola de 28 mm
2 x	Plancha fibra vidrio 620x540x1,0 mm
1 x	Plancha termoformable 0,5 mm (0,02") DIN A4
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
2 x	Repelente agent PVA 250 ml
1 x	Plancha fibra vidrio 350x150x0.3 mm
1 x	Bisagra de Flaps (6 uds)
1 x	Varilla latón Ø 1,5 mm x 1000 mm
1 x	Helice Race 40 mm 1/4"(hélice derecha)
1 x	Varilla latón Ø 1,0 mm x 1000 mm
1 x	Varilla latón hexagonal Ø 4 mm x 1000 mm
2 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x	Plancha fibra vidrio 620x540x2,0 mm
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
2 x	Plancha termoformable 0,1 mm (0,004") DIN A5
1 x	Plancha fibra vidrio 350x150x4.0 mm
1 x	Plancha fibra vidrio 620x540x0,3 mm
1 x	Release film 100 cm x 50 m
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
2 x	Plancha fibra vidrio 620x540x0,2 mm
1 x	Plancha PVC 320 x 194 x 0,23 mm (marrón)
1 x	Rodillo teflon 40 mm x 15 mm Diam.
1 x	Plancha de goma espuma (310x210x3 mm)
1 x	Hoja Depron Aero 1250x800x3 mm
1 x	Plancha termoformable 0,3 mm (0,039") DIN A4
1 x	Plancha aluminio 500x250x0.5 mm
1 x	Bisagra larga con pin metalico (12 uds)
1 x	Plancha estireno 320x120x0.5 mm
1 x	Plancha carbono 350x150x1.5 mm
1 x	Plancha carbono 1000x500x2,0 mm ECOTECH
2 x	Acople ALU M2,5 Ø 4 (2 uds)
1 x	Horn corto de latón M3 para cable (2 pcs)
1 x	Horn extra largo 60x30
1 x	Horn largo 50x26
1 x	Horn de control para SlowFlyer (3 pcs)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Horn corto de latón M2 para cable (2 pcs)
1 x	Acople ALU M2,5 Ø 6 (2 uds)
1 x	Horn de mando corto ajustable 3x24
1 x	Horn aluminio pequeño amarillo (2pcs)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Bancada motor clase 48"
2 x	Acople ALU M2 Ø 3 (2 uds)
2 x	Acople ALU M2,5 Ø 3 (2 uds)
1 x	Equilibrador hélices
1 x	Acople ALU M3 Ø 5 (2 uds)
1 x	Soporte WingFix ULTRA BE
1 x	Medidor de incidencias
1 x	Horn de mando corto con rodamiento (2 pcs)
1 x	Horn micro T2 Ø 1 (2 uds)
1 x	Horn de mando largo ajustable 3x34
1 x	Horn de mando largo con rodamiento (2 ud)
1 x	Acople ALU Izda. M2,5 Ø 4 (2 uds)
1 x	Horn DUBRO 1/2A
1 x	Horn mando DU-BRO 1/2 (2 pcs)
1 x	Acople ALU M2 Ø 4 (2 uds)
1 x	Carro remolque para veleros 720 x 239 mm
1 x	Soporte para aviones
1 x	Soporte para aviones SebArt
1 x	Tapon combustible magnetico Extreme Flight Negro
1 x	EXTRA 330SC-E 95" Orange/Blue/White
1 x	Tapon combustible magnetico Extreme Flight Azul
1 x	Bancada motor EDGE 540 48"
2 x	Plancha contrachapado HAYA 600 x 300 x 2,0 mm
2 x	Plancha de balsa 4,0x100x1000 mm
1 x	ARAMID panel nido de abeja 1300x2600x2 mm
1 x	Fibra carbono tela 160g/m2 100 cm x 3 m
1 x	Plancha carbono 550x350x2.5 mm ECOTECH
1 x	Plancha fibra vidrio 350x150x2.5 mm
1 x	Medidor angulos y/o incidencias

7,992.79EUR