1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Vacuum bag, 1200 mm x 50 m |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
2 x | BALSA trip 10x10x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
2 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
4 x | BALSA trip 3.0x3.0x1000 mm |
2 x | Beech dowels 2.0 x 1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
2 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | Xplorer1 anemometro |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | 140 mm rods set for direction control |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Support Pitot JETI |
1 x | Fiberglass plate 620x540x3,2 mm |
1 x | Support Filtro FESTO |
2 x | Chopped glass fibre strands 3 mm |
1 x | Glass fabric 25 g (2 m²) |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | Head runner |
1 x | Nut M1,6 |
1 x | Steering lever |
1 x | Blade holder center GFK 0,5 mm |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
2 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Horn 16,5x20 mm (2 pcs) |
1 x | Cable with accesories |
1 x | Horn with ball 55x40 |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Small aluminium horn red (2pcs) |
1 x | Horn mando small (2 pcs) |
3 x | Horn mando long (2 pcs) |
1 x | Truck-trailer for gliders 720 x 285 mm |
3 x | Angle measurer |
1 x | Tester LiPo/LiIon/LiMn/LiFe |
1 x | 15 mm reinforced hinge |
1 x | BALSA trip 8.0x8.0x1000 mm |
2 x | Birch plywood plate 600x300x1.2 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | 28 mm tailwheel unit |
2 x | Fiberglass plate 620x540x1,0 mm |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
2 x | Film release agent PVA 25 ml |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | Flap hinge (6 pcs) |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
2 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Fiberglass plate 620x540x2,0 mm |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
2 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Fiberglass plate 350x150x4.0 mm |
1 x | Fiberglass plate 620x540x0,3 mm |
1 x | Release film 100 cm x 50 m |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
2 x | Fiberglass plate 620x540x0,2 mm |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Long pinned hinge (12 uds) |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Carbon plate 350x150x1.5 mm |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Extra long horn 60x30 |
1 x | Long horn 50x26 |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Short adjustable control horn 3x24 |
1 x | Small aluminium horn gold (2pcs) |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Motor mount class 48" |
2 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Propeller balancer |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | WingFix ULTRA Black Edition |
1 x | Angle of incidence meter |
1 x | Small control horn with bearing (2 pcs) |
1 x | Micro control horn T2 Ø 1 |
1 x | Long adjustable control horn 3x34 |
1 x | Control horn long w/ball |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Horn DUBRO 1/2A |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Field folding model stand |
1 x | Field folding model stand SebArt |
1 x | EXTREME FLIGHT BLACK MAGNETIC ROUND FILLER PLUG |
1 x | EXTRA 330SC-E 95" Orange/Blue/White |
1 x | EXTREME FLIGHT BLUE MAGNETIC ROUND FILLER PLUG |
1 x | Motor mount EDGE 540 48" |
2 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
2 x | Balsa panel 4.0x100x1000 mm |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Carbon plate 550x350x2.5 mm ECOTECH |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | Medidor ángulos y/o incidencias |
1 x | Balsa panel 10x100x1000 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Carbon plate 350x150x2.0 mm |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Motor wall |
|
8,442.82EUR |