Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA85080

16.00EUR

EWC3 40 cm wing connector
[EMCA85080]

EWC3 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Spinner 159x200 mm GFK temporarily out of stock	DUPLEX 2.4EX MU 3 Sensor temporarily out of stock	Quick hose connector 4-4 mm temporarily out of stock
Servo HITEC D951 TW temporarily out of stock	Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) temporarily out of stock	Silicone 0,50 qmm servos wire Futaba (100 m) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Emisora Spektrum NX10 10ch (solo Tx)
619.92EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

3 x	Squared carbon wing joinner 5x5x220 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
2 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
2 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
2 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	One touch canopy lock
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
2 x	Covered closure or fairings
1 x	SUS wire 3m (nylon coated)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	LH long black aluminium horn L31xH30 (2pcs)
2 x	Horn with ball 55x40
1 x	Cable with accesories
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Small aluminium horn blue (2pcs)
2 x	Horn 5/10 with M2 Bearing
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	6 mm red aluminium threaded horn with patella
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Horn 6/35 with M3 Bearing
1 x	RH long aluminium horn (2pcs)
1 x	Horn 6/20 with M3 Bearing
2 x	Horn 20x28,5 mm (2 pcs)
1 x	6 mm blue aluminium threaded horn with patella
1 x	Horn with ball 40x30
1 x	20 mm carbon horn
2 x	Horn 16,5x20 mm (2 pcs)
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	SlowFlyer control horn (3 pcs)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Optical RPM Sensor
1 x	Solvent Plasti Dip 1000 ml
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Spikes Band (5 m)
1 x	SE Ring 250 mm (2 pcs)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Control horn long w/ball
1 x	Battery RX JETI LiIon RB 3100 7.2v
1 x	Support FUEL DOT V3
1 x	Soporte grifo FESTO (2 pcs)
1 x	Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x	Xplorer2 anemometro
1 x
1 x	LiPo Storage Box Type "P"
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Xplorer1 anemometro
1 x	Soporte filtro FESTO (4 pcs)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Digital precision scale up to 2000 g
1 x	Battery RX JETI LiIon RB 6200 7.2v
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Xplorer3 anemometro
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Landing gear frontal support 29x26x13,5
1 x	Pushrod greyline 3/2 with coupler M2 L: 1000 mm
1 x	100 mm rods + T patellas set for direction control
1 x	Control for forward wheel (MINI)
2 x	Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs)
2 x	Allen wheel collar M4x6
1 x	Canopy Latch
1 x	Cockpit metalic closing
2 x	Snap for floding prop for 2 mm axi
1 x	Cockpit plastic closing
1 x	100 mm rods set for direction control
1 x	140 mm rods + T patellas set for direction control
1 x	Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs)
2 x	Tip wing protector 30x10 (2 pcs)
1 x	Wheel collar 3.5 mm Ø (4 uds)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Wheel collar 3 mm Ø (4 uds)
1 x	Split M1,2x10 (10 pcs)
1 x	Wing bolts M6 Steel screw Blue (2 pcs)
1 x	Allen wheel collar M3x3
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Snap pin for micro clevis (10 uds)
1 x	Wing bolts M6 Steel screw Red (2 pcs)
1 x	ABS tube 5.0x3.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Snap long M2 (10 uds)
1 x	Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs)
1 x	38x4,5 mm wires output (2 pcs)
1 x	Window mounting channel 5m
1 x	Triple rod con. 2mm Pushrod (2 pcs)
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x	Clip fixing for wing (2 pcs)
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	Allen wheel collar M4x4
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs)
1 x	Cockpit latch closing I=10 mm
1 x	Locking cable tie 2.5x100 (uds)
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	Cockpit aluminium closing 5.4g
2 x	Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs)
1 x	Allen wheel collar M3x5
1 x	45 mm rods + T patellas set for direction control
1 x	Horn mando small (2 pcs)
1 x	Medium extra-strong control horn with bearing 2,8x24
1 x	Rudder forward 80x28 "type Kato"
1 x	Small control horn with bearing (2 pcs)
1 x	Horn mando long (2 pcs)
1 x	6 mm aluminium horn with patella
1 x	Jeti Black cap
1 x	Battery bed V2_M (black)
1 x	Stick coupler Ms 15 mm
1 x	Ancla Admiralsanker 60 mm (2pcs)
1 x	Ancla metal 40 mm (2 uds)
1 x	75 mm
1 x	Railing Ø 2mm (20 pcs)
1 x	Ancla 40 x 24 mm (2 pcs)
1 x	Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm
1 x	Anchor of tow Met. 60 mm
1 x	M2,5 5Diam metal ball link V3 (2 pcs)
1 x	Initior Transmitter FTX2 Wireless
1 x	Initior Receiver FRX2 Wireless
1 x	M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	EXTRA NG 85" 2159mm red/white
1 x	Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs)

3,093.48EUR