Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Hélice BIELA 21x14 3Bl Pusher (Tripala)
89.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Conector banana oro 2 mm (Ultralight)
2 x	Conector banana oro 6,0 mm Ultralight (pareja)
2 x	Funda conector 2 mm
1 x	Conector JR Servo hembra (10 pcs)
1 x	Conector JR/Uni Servo macho BLUE silicon (10 pcs)
2 x	Conector FUTABA Servo macho BLUE silicon (10 pcs)
2 x	Conector BEC hembra (10 pcs)
1 x	Conector banana oro 5,5 mm
1 x	Conector MULTIPLEX hembra 30 cm
1 x	Conector banana oro 8,0 mm
1 x	Conector banana oro 0,8 mm
2 x	Conector CAN 15
1 x	Conector Servo hembra 4 pines
1 x	Conector JR Servo macho (10 pcs)
1 x	Conector FUTABA Servo macho (10 pcs)
1 x	Conector JR Servo hembra (10 pcs)
1 x	Conector FUTABA Servo hembra BLUE silicon (10 pcs)
1 x	Conector FUTABA Servo hembra (10 pcs)
2 x	Conector 2 mm macho (2 pcs) con conector de seguridad
1 x	Conector banana oro 6,0 mm
1 x	Conector banana oro 2,5 mm (pareja)
1 x	Conector banana oro 4 mm
1 x	Conector banana oro 8,0 mm. 5 pcs (macho)
2 x	Conector banana oro 2,5 mm (100 parejas)
1 x	Conector BEC macho (10 pcs)
1 x	Conector banana oro 8,0 mm 5 pcs (hembra)
1 x	Casquillo para grimpar cable de 0,70 mm (10 pcs)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Varilla acero Ø 0,5 mm x 1000 mm
1 x	Varilla latón hexagonal Ø 3.5 mm x 1000 mm
1 x	Anclaje micro varilla mando Ø 1 mm prisionero/arandela (2 uds)
2 x	Cable acero trenzado Ø 0,5 mm (20 m)
1 x	Varilla acero roscada M3 -1m
1 x	Varilla acero Ø 5,0 mm x 1000 mm
1 x	Brazo direccional 12 mm Ø 4 mm
2 x	Varilla acero Ø 1,5 mm x 1500 mm
1 x	Varilla acero Ø 6,0 mm x 1000 mm
2 x	Brazo direccional 12 mm Ø 3 mm ( 2 uds)
2 x	Brazo direccional 12 mm Ø 4 mm ( 2 uds)
1 x	Varilla latón hexagonal Ø 4 mm x 1000 mm
1 x	Varilla latón hexagonal Ø 5 mm x 1000 mm
1 x	Cierre de plástico para cabinas
2 x	Cable acero trenzado Ø 0,62 mm (10 m)
1 x	Abrazadera 2.5x100 (20 uds)
1 x	Anclaje cabina en L "tipo F3A" (2 pcs)
1 x	Brazo direccional 16 mm Ø 3 mm ( 2 uds)
1 x	Abrazadera 3.2x142 (20 uds)
1 x	Cable acero trenzado Ø 0.88 mm - 60 kp (10 m)
2 x	Anclaje varilla mando Ø 2 mm prisionero/circlick (2 uds)
2 x	Varilla latón Ø 0,5 mm x 1000 mm
1 x	Anclaje varilla mando M2 mm prisionero/tuerca (2 uds)
1 x	Varilla acero Ø 5,5 mm x 1000 mm
1 x	Varilla acero Ø 2,5 mm x 1000 mm
2 x	Varilla acero Ø 1,2 mm x 1500 mm
1 x	Anclaje cabina de soporte vertical "tipo F3A" (2 pcs)
2 x	Cierre cubiertas o carenados
2 x	Soporte para aviones SebArt
1 x	Soporte para aviones
1 x	Medidor ángulos
2 x	Equilibrador hélices
1 x	Conector MPX negro hembra
1 x	Conector DEANS (T)
1 x	Conector equilibrado XH (8S) hembra (2 pcs)
1 x	Conector equilibrado XH (9S) hembra (2 pcs)
1 x	Conector MPX macho (doble PIN)
1 x	Conector 2 mm hembra (2 pcs) con conector de seguridad
1 x	Conector MR30 (hembra)
2 x	Conector banana oro 3 mm
3 x	Instrumentos individuales 1/4 Planeador
2 x	Liston ABS I 20x10x1000 mm
1 x	Varilla ABS 3,0x1000 mm
1 x	Liston ABS I 2,5x1,25x330 mm
1 x	Liston ABS 1,5x3,0x1000 mm
1 x	Varilla ABS 6,0x1000 mm
1 x	Liston ABS I 10x5x1000 mm
1 x	Varilla ABS 1,5x1000 mm
3 x	Liston ABS 1,0x2,0x1000 mm
1 x	Liston ABS 2.0x8.0x1000 mm
1 x	Liston ABS 2.0x5.0x1000 mm
2 x	Liston ABS 1,0x4,0x1000 mm
1 x	Liston ABS 1,5x6,0x1000 mm
1 x	Liston ABS I 3,5x1,75x330 mm
1 x	Liston ABS 2.0x3.0x1000 mm
1 x	Sistema cierre 200 mm con abrazadera (2 pcs)
1 x	CC 01
1 x	Alambre de cobre esmaltado en rojo Ø0,2 mm (5 m)
1 x	Varilla carbono plana 3.0 x 1.0 x 1000 mm
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Fibra carbono tela 245g/m2 127 cm x 10m
1 x	Rótula M3
1 x	Conector XT-30 (pareja)
1 x	Tubo ABS 18,0x16,0x1000 mm
1 x	Conector JR/Uni Servo hembra BLUE silicon (10 pcs)
1 x	Tubo carton cohete 25mm x 24mm x 230mm
2 x	Soporte bomba Xicoy X45
1 x	Soporte conector MPX (6 pcs)
1 x	Brazo direccional 16 mm Ø 4 mm
1 x	Cierre/Anclaje Ala M6 Azul (2 pcs)
2 x	Protector punta ala 38x10x12 (2 pcs)
1 x	Varilla acero Ø 3,0 mm x 1000 mm
1 x	Brazo direccional 16 mm Ø 4 mm ( 2 uds)
1 x	Cierre cabina 33/23.5mm (2 uds)
1 x	Pasador M1,2x10 (10 pcs)
1 x	Pasador 1x8 mm (10 uds)
1 x	Prisionero 4 mm Ø (4 uds)
1 x	Varilla acero Ø 0,8 mm x 1000 mm
1 x	Cierre metalico para cabinas
1 x	Anclaje cabina de soporte horizontal "tipo F3A" (2 pcs)
1 x	Anclaje varilla mando Ø 1.5 mm prisionero/arandela (2 uds)
1 x	Cierre para cable de acero diam. 1,0 (10 pcs)
1 x	Varilla latón Ø 0,8 mm x 1000 mm
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Cierre/Anclaje Ala M3 Rojo (2 pcs)
1 x	Frenos Cuchillo 250 mm / 16 mm
2 x	Varilla ABS 4,0x1000 mm
2 x	Soporte WingFix ULTRA BE
1 x	Conector banana oro 4 mm antichispa
3 x	Bungee HLG Premium
1 x	Soporte conector MPX
1 x	Conectores Kontronik (10 conectores, 5 pares)
1 x	Placa kit MPX 8 pines con conector macho/hembra
1 x	Conector JAPAN G2 Set 5 pares
1 x	Conector JR Servo hembra (50 pcs)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Abrazadera 4.6x203 (20 uds)
1 x	Conector DEANS 4 pines (1 par)
1 x	Conector banana oro 3,5 mm
1 x	Liston ABS H 2,0x2,0x330 mm
1 x	Servo KST BLS825 V8.0 HV 35Kg 8.4v
1 x	Varilla ABS 1,25x1000 mm
1 x	Servo KST A08H V6.0 3,2Kg HV
1 x	Liston ABS 1,0x5,0x1000 mm
1 x	Helice PT 22x10 EL
1 x	Helice PT 21x13 EL
1 x	Actro 32-3 Heli MAX 5mm
1 x	Helice pleg. VITAPROP 15x9.5 carbono
1 x	Pendulo "Special" depositos 60g
2 x	Soporte Filtro FESTO
1 x	Soporte conector XT-60 (2 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Cierre cabina tipo FOX MDM1 4m (1 par)
2 x	Varilla mando doble roscada duraluminio M3 100 mm (2 pcs)
1 x	Aero frenos eléctricos para veleros 440 mm (2 pcs)
1 x	Colador protector turbina 67 x 32 mm
1 x	Colador protector turbina 94 x 34 mm
1 x	Pipa Jet A-10 Skymaster (set 2 pcs)
1 x	Soporte filtro FESTO (4 pcs)
1 x	Pipa Jet 40N-80N (200 mm)
1 x	Pipa Jet ASPIRE 2m
2 x	Soporte Angular conector XT-60 (2 pcs)
2 x	Varilla mando doble roscada duraluminio M3 40 mm (2 pcs)
1 x	Disipador motor tipo 400
1 x	Disipador motor tipo 280
1 x	Soporte de motor para FunJet (Multiplex)
1 x	Carro remolque para veleros 720 x 239 mm
1 x	Varilla mando doble roscada aluminio M3 30 mm (2 pcs)
1 x	Bancada trasera motor gasolina 38 mm
1 x	Carro remolque para veleros 720 x 285 mm
1 x	Astra Bayoneta (Top Model)
1 x	Bancada AXI
2 x	Varilla mando doble roscada duraluminio M3 120 mm (2 pcs)
1 x	Varilla mando doble roscada aluminio M3 80 mm (2 pcs)
1 x	Albatros rojo/blanco (Top Model)
1 x	Aero frenos eléctricos para veleros 300 mm (2 pcs)
2 x	Bidule 111 3000 mm, Cabina
1 x	ALBATROS 3.0 m (naranja/blanco)
1 x	Bancada servo ala 18 mm
1 x	Bidule 55 2460 mm, Cabina
2 x	Varilla mando doble roscada duraluminio M3 130 mm (2 pcs)
1 x	Transmision funda/varilla octog. plastica 3/2 porta kwik link M2
1 x	Varilla mando doble roscada aluminio M2,5 60 mm (2 pcs)
1 x	Rodamientos para motor HACKER C50
1 x	Varilla mando doble roscada SUS303 M2.5 70mm (2 pcs)
1 x	Transmision funda/varilla octog. plastica 4/3 porta kwik link M3
1 x	Varilla mando roscada M2,5 (2 uds)
1 x	Varilla mando doble roscada duraluminio M3 34 mm (2 pcs)
1 x	Varilla mando doble roscada duraluminio M3 90 mm (2 pcs)
1 x	Varilla mando doble roscada aluminio M2,5 40 mm (2 pcs)
1 x	Adaptadores carga 6s JST-XH
1 x	Bascula precisión 0.1- 600 g
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 20m
1 x	Pala carbono 230 mm
1 x	Liston ABS 1,0x3,0x1000 mm
1 x	Medidor de incidencias
1 x	Varilla ABS 2,5x1000 mm
1 x	Medidor angulos tamaño pequeño
1 x	Varilla ABS 1,0x1000 mm
2 x	Catapulta Vasa model
1 x	TMM 2512-3S heli
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 100 m
1 x	Tubo carbono (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Ferrita 27x14x7 mm
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x	Ferrita 14x8x5.5 mm
1 x	Fibra carbono TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Fibra carbono tela 68 g/m² (Aero, plain weave) 100 cm x 0.5m
1 x	Film perforado 100 cm / 50 m
1 x	Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Ferrita con funda
1 x	AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs)
1 x	Fibra carbono molida 100g
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m
1 x	Ferrita 17x10x6.5 mm
1 x	Cianocrilato CA Glue (medium) 20g
1 x	Manta bolsa de vacio 300 gr/m2 Bobina 1m
1 x	Varilla carbono 2.0 mmx1000 mm
1 x	8Wx2 Gears-Spotlight, UltraPower, 20mm White
1 x	Microbalones 100g (0.20g/cm3 - Aprox 1L)
1 x	Servo KST MS825 V8.0 35kg 8.4v
1 x	Thixotropic agente TM100, tin/415g (aprox. 5 L)
1 x	Tren retráctil veleros 8-16 Kg 2.5-3.2 (rueda 140 mm con freno)
1 x	Tren retráctil veleros 8-16 Kg 2.5-3.2 (rueda 127 mm)
1 x	Tren retráctil veleros 3-7 Kg 3.8-4.3 (sin rueda) 70-82 mm
1 x	Tren retráctil veleros 8-16 Kg 2.5-3.2 (sin rueda) 140 mm
1 x	Tren retráctil veleros hasta 2 Kg
1 x	Tren retráctil veleros hasta 3,5 Kg
1 x	Aceite para Bomba Vacio (1 litro)
1 x	Soporte conector MPX empotrado (6 pcs)
1 x	Soporte conector MPX enrasado (6 pcs)
1 x	Tubo carton cohete 50mm x 48mm x 250mm

8,513.87EUR