Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Epoxy » Epoxy R-G » R1001101

29.50EUR

Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har
[R1001101]

Epoxy Resin L and Hardener L 40 min. (1 Kg) 715g Resina / 285g Hardener

The resin system Epoxy Resin L + Hardener L yields superior impregnating and wetting properties towards carbon, glass, aramid and natural fibres.

Low viscosity
Highly transparent
High degree of UV stability
Tack-free curing even of thin layers
Glass transition temperature (Tg) max. 76 °C (post-curing at 60 °C / 15 h)
High static and dynamic strength
Free of nonylphenol and DETA
Processing time: 40 minutes (100 g / 20 °C)
Mixing ratio:
100 : 40 parts by weight resin : hardener
100 : 45 parts by volume resin : hardener
It exhibits a very good price/performance ratio and is suitable for the following processing procedures:
Hand laminating
Vacuum moulding
Press moulding
Expertise for the resin system Epoxy Resin L + Hardener L: this system is not cytotoxic (cell damaging), important for applications in medical purposes.
Mechanical properties (Neat resin after curing)
Flexural test
Flexural strength (DIN EN ISO 178): 111 MPa
Flexural modulus (DIN EN ISO 178): 2.960 MPa
Tensile test
Tensile strength (DIN EN ISO 527): 69 MPa
Elongation at break: 4.7 %
Compression test
Compressive strength (DIN EN ISO 1426): 91 MPa
PoxySystems® is a registered trademark of R&G
General information about the system "Epoxy Resin L" with Hardeners S, L, CL, EPH 500, EPH 161, W 300, GL 1 and GL 2
* Low viscosity, free of solvents and fillers
* Fast impregnation of glass, aramid, carbon and natural fibres
* High static and dynamic strength (GL approval with the Hardeners GL 1 and GL 2 being present

Epoxy Resin L with the corresponding Hardeners S, L, CL, EPH 500, EPH 161, W 300, GL 1 and GL 2 is the most commonly used laminating and adhesive resin in R&G`s delivery programme.

In conjunction with the Hardeners S (15 minutes), L (40 minutes), CL (60 minutes), EPH 500 (60 minutes), EPH 161 (90 minutes), W 300 (300 minutes), GL 1 (30 minutes) and GL 2 (210 minutes), this epoxy resin exhibits similar mechanical properties to those of the laminating systems usual aerospace .Its heat deflection temperature reaches from 60 °C (S, L, EPH 500, W 300), to 80 °C (GL 1 and GL 2, after post-curing), to 95 °C (CL, after post-curing) and finally to 120 °C (EPH 161, after post-curing).

Its low surface tension, good adhesion, and minimal curing shrinkage makes the Epoxy Resin L ideal for bonding wood, metal, foamed polystyrene like Styropor® etc. It can be processed in all of the customary methods, e.g. hand lay-up, pressure and vacuum impregnation, press moulding and filament winding.

under request

Reviews

Customers who bought this product also purchased

Spinner 100 mm CFK under request	SPS 70V 140/280 A under request	MPS Gas-Cap-Powerswitch under request
Epoxy SLOW-CURE™ 30 min (130g) under request	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll under request	Servo HITEC HSB-9380TH under request

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Servo GO-1006MG (0.052s/60º, 3.0Kg)
52.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Extractor piñones 2.3/3.2 mm
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
2 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Aluminium red ball links M3 V1 (10 pcs)
2 x	Ball link Aluminio M3 (2 pcs)
2 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
2 x	Threaded coupler M2 (10 uds)
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
3 x	Threaded coupler M3 (10 uds)
1 x	Z type of cable coupler Ø 1 (2 uds)
2 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Gold antispark 5,5 mm plug
2 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
2 x	Connectors banna oro 0,8 mm (M/F)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Connectors banna oro 3 mm (M/F)
1 x	XH female balance (4S) connector (2 pcs)
1 x	Conector BEC male (10 pcs)
2 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	MPX Sub-D Adaptor
2 x	Connectors DEANS (T)
1 x	XH male balance (4S) connector (2 pcs)
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
2 x	30 cm DEANS female connector
1 x	XH female balance (3S) connector (2 pcs)
1 x	Conector Servo female 4 pines
1 x	Conector BEC female (10 pcs)
1 x	Connectors DEANS 4 pins (1 pair)
2 x	Banna gold connector 2,5 mm (M/F)
1 x	XH male balance (3S) connector (2 pcs)
2 x	XH female balance (2S) connector (2 pcs)
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
2 x	Vacuum bag, 1200 mm x 50 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Cut tube
1 x	25 mm reinforced hinge
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Large flex hinge (12 uds)
1 x	SUS wire 3m (nylon coated)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Painting GHT Lexan Black 150 ml
1 x	6 mm Prop Adapter M8
1 x	4 mm Prop Adapter M6
1 x	Pull-Pull complet set with CF rudder double servo arm
1 x	wire tensioner (blue)
2 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
2 x	White large kwik link (10 pcs)
1 x	M4xM2,5xL30 nylon clevis and arm (10 uds)
2 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Pulley brass 5/1,5 (2 pcs)
1 x	Magnetic Connect locking system
1 x	XH female balance (5S) connector (2 pcs)
1 x	XH male balance (9S) connector (2 pcs)
1 x	Connectors MPX black female
2 x	Conector XT-150 6mm (Set: 5 pares)
1 x	XH female balance (7S) connector (2 pcs)
1 x	Connectors banna oro 6,0 mm (M/F)
2 x	Connectors banna oro 2 mm (M/F)
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Connectors banna oro 4 mm (M/F)
1 x	Conector MR-60 (pareja)
1 x	Connector CAN 15
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Conector JR Servo female (10 pcs)
1 x	Styrene plate 320x120x1.0 mm
1 x	PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x	Sheet Depron Aero 1250x800x3 mm
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x	Angled clevis with threaded rod M3
2 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	Ball link M2 (10 pcs)
1 x	Short ball link M3 (6 uds)
1 x	M3 Maxi ball link (2 uds)
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	Cable coupler M3 (10 uds)
1 x	5 mm Prop Adapter M6
1 x	Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs)
1 x	Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs)
1 x	Turnbuckle M1,6x17/27 (2pcs)
1 x	Metal ball clevis M3 (10 uds)
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	Cabel charger transmitter GRAUPNER
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	Long ball link M3 (6 uds)
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	Joint with bearing M2 22x5,5
1 x	Ball link M3 (6 uds)
1 x	M3 Maxi ball link (2 uds)
1 x	Socket head long ball link M3 (2 uds)
1 x	Short ball link M2 (6 uds)
2 x	PropCover 16-20" (2 pcs)
1 x	Xoar Electric Beechwood Prop 20x10
1 x	Xoar Electric Beechwood Prop 24x8
1 x	Propeller MEJZLIK 20x13 Electric light (41 g)
2 x	Propeller MEJZLIK 22x10 Electric light (36 g)
1 x	Xoar Electric Beechwood Prop 21x10
1 x	Propeller MEJZLIK 9,5x3 SF Carbon Indoor
1 x	Propeller MEJZLIK 21x10 Electric light (36 g)
2 x	PropCover 16-20" (1 pcs)
2 x	3,2 mm Prop Adapter M5
2 x	Actuador lineal HLS12-100210-7.4v
2 x	Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm
1 x	Turnbuckle M2x29/43 (2pcs)
1 x	3 mm Long Prop Adapter M5
2 x	Small kwik link (10 pcs)
1 x	Round Rod 1.0x3.5 cm
1 x	Cable coupler M2x66 (2 uds)
2 x	Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs)
1 x	Turnbuckle M2,5x27/43 (2pcs)
1 x	Turnbuckle M3 33x49 (2pcs)
1 x	Turnbuckle M2,5x32/48 (2pcs)
1 x	Pin to cable coupler M1,6 ⌀ (6 pcs)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Pulley brass 16/2 (2 pcs)
1 x	Cable coupler M2 (10 uds)
1 x	Black large kwik link (10 pcs)
1 x	2,3 mm Prop Adapter M5
1 x	2 LiPo XH>EH adapter
2 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	PWC6 PowerWingConnector for 6 servos with fuselage socket
2 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	DPSI Ampere & Voltage bundle
2 x	4 LiPo XH>EH adapter
1 x	DPSI RV Mini 5 (2008)
2 x	30 cm BEC cable (male)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm)
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	XT-90 connector (pair)
2 x	White silicone 0,25 qmm wire (150 m)
1 x	MPX screwable clips (4 pcs)
1 x	Mounting frame MPX female connector
1 x	Mounting frame MPX male connector
1 x	Red 3m5 mm connector holder
1 x	XT60 Connector with Holder Male 2pcs
1 x	Glass fibre sleeve Ø 20 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Actrocon 60A ESC
1 x	ABS 500 x 400 x 1 mm (white)
1 x	Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x	ABS 500 x 400 x 1,5 mm (white)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	Peel ply 95 g/m² (plain weave) 100 mm x 100 m
1 x	Buy Perforated film 100 cm / 50 m
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Spinner propeller pleg. 40 mm / 4,0 mm
1 x	Aluminum Fold Prop Spinner 50 mm / 6mm
1 x	Spinner propeller pleg. 30 mm / 2,3 mm
1 x	Spinner propeller pleg. 30 mm / 6,0 mm
1 x	Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Spinner propeller pleg. 45 mm / 5 mm
1 x	30 cm BEC cable (female)
1 x	Stickers-digit for marking
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	Spinner Alumin. propeller pleg. 40 mm / 3,0 mm
1 x	34 mm Alu spinner 3.17 mm pleg. propeller
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Turnbuckle M1,6x20/30 (2pcs)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x	White spinner propeller pleg. 36 mm / 5 mm
1 x	Spinner propeller pleg. 40 mm / 5 mm
1 x	White spinner propeller pleg. 36 mm / 4 mm
1 x	Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Spinner propeller pleg. 40 mm / 4 mm
1 x	Z Spinner (CN) 42mm
1 x	Spinner propeller pleg. 33 mm / 5,0 mm
1 x	Spare white 36-38 mm spinner
1 x	White spinner propeller pleg. 50 mm / 6 mm
1 x	CN-Spinner propeller pleg. 36 mm / 6 mm
1 x	Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Spinner propeller pleg. 33 mm / 6,0 mm
1 x	Micro clevis (10 uds)
1 x	Spinner fold propeller 50 mm (white spare spinner)
1 x	Spinner propeller pleg. 38 mm / 4 mm
1 x	Spinner propeller pleg. 38 mm / 3,17 mm
1 x	Rubber bushing with bracket "A" type (2 pcs)
1 x	Z Spinner (CN) 40mm
1 x	White spinner propeller pleg. 42 mm / 5 mm
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	3 LiPo XH>EH adapter
1 x	Silicone red 0,25 mm² wire (25 m)
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	Cabel "Y" 30 cm (Futaba)
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	5 LiPo XH>EH adapter
1 x	White silicone 0,25 mm² wire (25 m)
1 x	Cabel "Y" 30 cm (graupner)
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	White silicone 0,25 qmm wire (100 m)
1 x	Xoar Electric Beechwood Prop 15x8

6,187.64EUR