Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

VSpeak ECU converter KingTech
79.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Piloto 1/6 "John"
1 x	Piloto militar "Kamikaze" tamaño 9cm (Slimline)
2 x	Piloto civil "Joe" tamaño 9cm (Slimline)
3 x	Piloto JAN 1/4 Veleros
2 x	Piloto 1/10 "Jack"
1 x	Piloto 1/4 "Mike"
1 x	Piloto 1/4 "Heidi"
2 x	Piloto 1/12 "Tom"
2 x	Piloto 1/12 "Cougar"
2 x	Piloto Jet "Green" 1/6 Scale
2 x	Piloto civil "Curt" tamaño 9cm (Slimline)
1 x	Piloto 1/7 "Japonés"
2 x	Piloto 1/10 "Jimmy"
1 x	Piloto 1/6 "Cindy"
2 x	Piloto 1/12 "Langley"
2 x	Piloto civil "Gramps" tamaño 9cm (Slimline)
2 x	Piloto civil "Pamela" tamaño 9cm (Slimline)
1 x	Piloto 1/6 "Garry"
1 x	Piloto "Goose" (Slimline)
1 x	Liston ABS I 20x10x1000 mm
1 x	Varilla ABS 2,5x1000 mm
1 x	Liston ABS 1,5x3,0x1000 mm
1 x	Liston ABS I 3,5x1,75x330 mm
1 x	Varilla ABS 6,0x1000 mm
1 x	Varilla ABS 4,0x1000 mm
1 x	Liston ABS 1,5x2,0x1000 mm
1 x	Varilla ABS 5,0x1000 mm
1 x	Liston ABS H 1,5x1,5x330 mm
1 x	Liston ABS 1,5x8,0x1000 mm
1 x	Varilla ABS 3,0x1000 mm
1 x	Liston ABS 1,0x2,0x1000 mm
1 x	Varilla ABS 2,0x1000 mm
1 x	Liston ABS H 2,0x2,0x330 mm
1 x	Liston ABS 1,5x6,0x1000 mm
1 x	Liston ABS 2.0x10.0x1000 mm
1 x	Varilla ABS 1,25x1000 mm
1 x	Liston ABS I 2,5x1,25x330 mm
1 x	Varilla ABS 1,5x1000 mm
1 x	Liston ABS I 10x5x1000 mm
1 x	Liston ABS 1,5x4,0x1000 mm
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Piloto 1/12 "Fighter"
1 x	Piloto "Dick" Legends Series(Slimline)
3 x	Piloto civil "G-Man" tamaño 9cm (Slimline)
2 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
2 x	Anemometro Xplorer1
1 x	Anemometro Xplorer2
1 x	Anemometro Xplorer4
2 x	Horn de control para SlowFlyer (3 pcs)
1 x	Horn de mando 6/20 con rótula M3
1 x	Horn de mando 5/20 con rótula M2
1 x	Horn de mando 6/27 con rótula M3
1 x	Horn aluminio pequeño azul (2pcs)
1 x	Horn de mando carbono 20 mm
1 x	Horn con ball 55x40
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Horn corto de latón M2 para cable (2 pcs)
1 x	Acople ALU M2,5 Ø 6 (2 uds)
1 x	Acople ALU M2 Ø 3 (2 uds)
1 x	Acople ALU M3 Ø 4 (2 uds)
1 x	Horn aluminio negro LH largo L31xH30 (2pcs)
1 x	Varilla acero Ø 0,8 mm x 1000 mm
1 x	Varilla latón Ø 0,8 mm x 1000 mm
1 x	Varilla acero Ø 6,0 mm x 1000 mm
1 x	Varilla latón hexagonal Ø 5 mm x 1000 mm
1 x	Varilla acero Ø 4,0 mm x 1000 mm
1 x	Varilla acero Ø 4,5 mm x 1000 mm
1 x	Varilla acero Ø 1,0 mm x 1000 mm
1 x	Varilla acero Ø 5,5 mm x 1000 mm
3 x	Adaptador JST-XH
2 x	DPS Interruptor JR/JR
2 x	Adaptador (GP/KO hasta 4S) para CellPRO 4S
1 x	Conexion PREMIUM fuselaje/alas para 3 servos SUB-D 160 cm
1 x	Adaptador 2 LiPos XH>EH
1 x	Cable "Y" equilibrador 6S, 2x JST-XH / 1x JST-EH
1 x	Cable carga bateria transmisor Multiplex 2x0,5 qmm (50 cm)
1 x	Conector Sub-D 2+5 Hembra
1 x	Tornillo Servos M4x5/8 aluminio anodizado negro (4 pcs)
2 x	Arandela conica ancha alumino M4 Oro (4 pcs)
1 x	Arandela conica ancha alumino M4 Azul (4 pcs)
1 x	Arandela conica ancha alumino M3 oro (4 pcs)
1 x	Círculo autoadhesivo 15 mm (30 pcs)
2 x	Tornillo M4x0,7x25 mm Cabeza Botón alum. anodizado azul (4 pcs)
1 x	Tuerca autoempotrable M3 (4 pcs)
1 x	Arandela conica ancha alumino M3 rojo (4 pcs)
1 x	Tuerca autoempotrable M5 (4 pcs)
2 x	Tornillo M4x0,7x20 mm aluminio anodizado azul (4 pcs)
1 x	Círculo autoadhesivo 10 mm (72 pcs)
2 x	Tornillo M4x0,7x20 mm Cabeza Plana alum. anodizado azul (4 pcs)
3 x	Tornillo Servos M3x16 aluminio anodizado rojo (4 pcs)
1 x	Tuerca autoempotrable M6 (4 pcs)
1 x	Tuerca autoempotrable M6 (4 pcs)
2 x	Tornillo M3x0,5x20 mm Sokect Head aluminio anodizado azul (4 pcs
1 x	Arandela conica ancha alumino M4 Negro (4 pcs)
1 x	Silent-blocks DLE 170M
1 x	Rótula con bola M3 (10 pcs)
1 x	GameCommander USB Universal
1 x	Gafas Innovation Plus
1 x	Termo-retráctil negro tubo de 6,4x1000 mm 2:1
1 x	Bayoneta de carbono 13,4 mm Ø 0,48 mm
1 x	Sistema remoto de ignición eléctrica
1 x	Piloto "Adolf" Legends Series(Slimline)
1 x	Piloto JET 1:3,5
1 x	Suncover 100cc Red
1 x	Fuente alimentacion NT 25 Amp.
1 x	Carga cohete D3-P
1 x	Servo SAVOX SC-1251 MG
1 x	Brazo servo Savox SH-82 aluminio
1 x	Soporte montaje servos Std. apaisado
1 x	Brazo servo Futaba tandem 54 mm con rótula
1 x	Anemometro Xplorer3
1 x	Brazo servo 52 mm Hitec
2 x	Brazo servo doble pull-pull 14/20 mm Futaba con rótulas
2 x	Servo DITEX TD2612S
1 x	Brazo servo 20 mm Hitec
1 x	Combustible Glow "KAVAN" air/heli 10% nitro
1 x	Servo KST DS125MG servo ala 10mm 28g 7Kg
1 x	Servo KST X08 Plus 9g HV servo
1 x	Soporte servos para retráctil
1 x	Plancha carbono 350x150x3.0 mm
1 x	Servo BLS-M55B 61.2kg
2 x	Soporte servo KST X10 mini / DS135MG
1 x	Set piñones servo HITEC HS-55
1 x	Set acople ALU M2,5 Ø 4 (2 uds)
2 x	Tuerca autoblocante M3 (10 pcs)
1 x	Arandela de bloqueo 3 mm (10 pcs)
1 x	Horn aluminio RH largo (2pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Set piñones servo HITEC HS-7950TH
1 x	Servo ROBBE FS-31 Pico Servo
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
1 x	Set piñones servo HITEC HS-81
1 x	Piloto "Duke" Legends Series(Slimline)
1 x	Brazo de servo 50 mm con rodamiento (2 pcs)
1 x	Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
1 x	Servo HITEC D941 TW
1 x	Set piñones servo HITEC HS-311/322/325BB
1 x	Servo KST A08H V6.0 3,2Kg HV
1 x	Adaptador 4 LiPos XH>EH
2 x	Prolongador 5 lipos conector JST - JST/C
1 x	Interruptor electrónico autoarranque
2 x	Cable BEC 30 cm (macho)
1 x	Multi-adaptador equilibradores JST/C - TP
3 x	Alambre de cobre esmaltado en rojo Ø0,2 mm (5 m)
2 x	SBEC 30 D
1 x	Tapón antena V1 Futaba-JR (Plata)
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Servo NARO Max Std
1 x	Protector Conector Dean-T (1 pareja)
1 x	Conector XT-150 6mm (Set: 5 pares)
1 x	Pletina MPX 6 pines (5 uds)
1 x	Conector XT-30 (pareja)
1 x	Soporte conector MPX macho (6 pcs)
1 x	CC 03
1 x	Alambre de cobre esmaltado Ø0,2 mm (5 m)
2 x	SBEC 40
1 x	CC 02
1 x	Conector alas/fuselaje para 16 pines AWG 20-24
1 x	MAX BEC 2D plus EX
1 x	Prolongador 2/3 lipos conector JST/C
1 x	PSC 6
1 x	Interruptor SPS 70V 100/200 A
1 x	Conector JST SH 1,0mm hembra con cable de 10 cm
1 x	Interface REVOLECTRIX USB para CellPRO 10s
1 x	Interruptor RX/Batería
1 x	Switch electronico SXH HV
1 x	Interruptor canal todo-nada 3 posiciones
1 x	USB cable ALTIS
3 x	Cable carga bateria transmisor Futaba 2x0,5 qmm (50 cm)
3 x	Adaptador TP/TopFuel - XH 2/3S
1 x	Alambre de cobre esmaltado en negro Ø0,2 mm (5 m)
1 x	Conector alas/fuselaje para 12 pines AWG 20-22
2 x	Tuerca autoblocante M6 (10 pcs)
1 x	Arandela 1.7 mm (20 pcs)
2 x	Tornillo M3x0,5x20 mm Sokect Head aluminio anodizado lila (4 pcs
1 x	Circlick para eje 1.9 mm (10 pcs)
2 x	Tuerca para montaje M6 (4 pcs)
2 x	Tornillo Servos M2x7/16 (4 pcs)
1 x	Tuerca hexagonal M3 (10 pcs)
1 x	Circlick para eje 2.3 mm (10 pcs)
1 x	Tornillo Servos M2x9/16 (4 pcs)
1 x	Tuerca para insertar M4 (4 pcs)
1 x	Tuerca hexagonal M4 (20 pcs)
1 x	Clevis con trasmisión M3
1 x	Servo DITEX EL0510M
1 x	Brazo servo doble pull-pull 24/30 mm Futaba con rótulas
1 x	Servo KST BLS825 V8.0 HV 35Kg 8.4v
1 x	Soporte servo KST X08/H and Plus
1 x	Tornillo allen M3x8 (10 pcs)
1 x	Tornillo M2x12 mm aluminio (4 pcs)
1 x	Brazo servo 25 mm Hitec con rótula M3
1 x	SLICK 360-A 104" (2640 mm)
1 x	Brazo servo 20 mm FUTABA con rótula
1 x	Brazo servo 25 mm Hitec con rótula
1 x	Brazo servo doble pull-pull 50/60 mm Futaba con rótulas
1 x	SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x	Brazo servo 25 mm Futaba con rótula M3
1 x	Brazo servo redondo 30 mm Futaba
1 x	EDGE 540-A 105" (2660 mm)
1 x	Brazo servo 20 mm Futaba
1 x	Brazo servo 38 mm Hitec con rótula
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x	Brazo servo doble pull-pull 76/92 mm Futaba con rótulas
1 x	Brazo servo redondo 30 mm Hitec
1 x	Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm
1 x	Servo KST X15-1208 V8.0 13.5Kg HV
1 x	Combustible Glow "KAVAN" air/heli 15% nitro
1 x	Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x	Horn de mando 5/10 con rótula M2
1 x	Cable "Y" carga 4 mm (2 IN-1 OUT)
2 x	Base para servo
1 x	Helice Carbono 23x12
2 x	SBEC Jeti
1 x	Hélice plegable CAM-Carbon 14x6
1 x	Interruptor electronico RC 30 Amp
1 x	Tornillo allen M3x30 (10 pcs)
1 x	Tornillo M2.9x9.5 (10 pcs) Especial cabinas, tapas servos
1 x	Círculo autoadhesivo para arandelas M4 (36 pcs)
1 x	Tornillo allen M3x12 (10 pcs)
1 x	Emisora MZ-12, 6 Ch HoTT
1 x	Capuchón decorativo interruptores TX
1 x	Cierre cabina
1 x	Hélice 44,0 mm (hélice izquierda)
1 x	Pinza de cierre tubo 6 mm
1 x	Mini termometro infrarrojos
1 x	Prolongador macho/hembra equilibrador Thunder Power 6S
1 x	Adaptador 3 LiPos XH>EH
2 x	Adaptador MPX-EC3 10cm
1 x	Cable "Y" equilibrador 7S, 2x JST-XH / 1x JST-EH
1 x	Cable carga bateria transmisor Graupner 2x0,5 qmm (50 cm)
2 x	Cable conexión RX
1 x	Cable silicona 6,0 mm2 negro (1 m)
1 x	Tarjeta SD HC 8 GB
1 x	Anillo espaciador para hélice graupner 8/5.5 mm
1 x	Helice Carbono 16x17
1 x	Hélice plegable CAM-Carbon 11x7
1 x	Cable silicona "Y" 30 cm (Futaba)
1 x	Hélice plegable CAM-Carbon 10x8
1 x	Interruptor magnetico para DPSI RV Family
1 x	Hélice plegable CAM-Carbon 15x6
1 x	Cable servos PVC 0,08 mm2 Graupner (5 m)
1 x	Hélice plegable CAM-Carbon 11x10
1 x	Hélice plegable CAM-Carbon 13x6.5
2 x	Tuerca autoblocante M5 (10 pcs)
1 x	Tornillo M3x0,5x6 mm Cabeza Plana Titanio (4 pcs)
2 x	Tornillo M4x0,7x20 mm Cabeza Plana alum. anodizado lila (4 pcs)
1 x	Tornillo Servos M4x5/8 aluminio anodizado azul (4 pcs)
1 x	Tuerca autoblocante M2 (10 pcs)
1 x	Tuerca autoblocante M2,5 aluminio (4 pcs)
1 x	Tuerca autoblocante M4 aluminio azul (4 pcs)
1 x	Tornillo M3x0,5x20 mm Cabeza Plana alum. anodizado azul (4 pcs)
1 x	Tornillo nylon M4x20
1 x	Tornillo nylon M6x40
1 x	Tornillo M4x0,7x20 mm Cabeza Botón alum. anodizado azul oscuro(4
1 x	Tornillo Servos M2x5/16 (4 pcs)
1 x	Tuerca autoblocante M2 (20 pcs)
1 x	Tornillo M2x8 PH
1 x	Tuerca autoblocante M2.5 (10 pcs)
1 x	Tornillo nylon M5x30
1 x	Tornillos 2,2 x 6,5 mm (20 pcs)
1 x	Tornillo M3x0,5x12 mm Cabeza Plana Titanio (4 pcs)
1 x	Tornillo M3x0,5x8 mm Cabeza Plana Titanio (4 pcs)
1 x	Tornillo M2x8 PH cabeza abellanada
1 x	Tuerca autoblocante M3 aluminio azul (4 pcs)
1 x	Tornillo Servos M4x5/8 aluminio anodizado plata (4 pcs)
1 x	Tuerca autoblocante M2 aluminio (4 pcs)

12,124.90EUR