Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Servo GO-1006MG (0.052s/60º, 3.0Kg)
52.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Extractor piñones 2.3/3.2 mm
2 x	Bungee HLG Premium
2 x	Perfil de ABS cuadrado 3 x 1000 mm
1 x	Perfil Acero Inox. 12.3x7.7x1000 mm
2 x	Perfil de ABS de media caña 3x1000 mm
2 x	Conector ABS "H" 4.0 mm x 1000 mm
1 x	Conector banana oro 8,0 mm. 5 pcs (macho)
1 x	Conector 2 mm macho (2 pcs) con conector de seguridad
1 x	Conector banana oro 2,5 mm (pareja)
1 x	Conector banana oro 8,0 mm 5 pcs (hembra)
1 x	Conector equilibrado XH (4S) macho (2 pcs)
1 x	Adaptador Sub-d conector MPX
1 x	Conector banana oro 3 mm
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Conector equilibrado XH (3S) macho (2 pcs)
2 x	Conector banana oro 3,5 mm
1 x	Conector BEC hembra (10 pcs)
1 x	Conector equilibrado XH (4S) hembra (2 pcs)
1 x	Conector DEANS (T)
1 x	Conector DEANS 4 pines (1 par)
1 x	Conector banana oro 5,5 mm antichispa
1 x	Conector banana oro 2,5 mm (100 parejas)
1 x	Conector 2 mm hembra (2 pcs) con conector de seguridad
1 x	Conector Servo hembra 4 pines
1 x	Conector equilibrado XH (2S) hembra (2 pcs)
1 x	Conector banana oro 6,0 mm Ultralight (pareja)
1 x	Conector ala MPX 8 pines con conector M/H
1 x	Conector banana oro 6,0 mm
1 x	Conector banana oro 2 mm (Ultralight)
1 x	Conector equilibrado XH (3S) hembra (2 pcs)
1 x	Conector Centralita Optotronix Aurora
2 x	Conector banana oro 4 mm (Ultralight)
1 x	Varilla carbono 7.0 mmx1000 mm
1 x	CC 02
1 x	Cinta autoadhesiva 5 mm x 16.80m; Diente 0.5 mm
1 x	Plancha contrachapado Abedul 600x300x6,0 mm
2 x	Adaptador de hélice 3 mm M5 (corto)
1 x	Conexión alas 2 servos JR/Graupner 50 cm
3 x	Catapulta Vasa model
1 x	Perfil de ABS "L" 4,0x4,0x1000 mm
1 x	Perfil de ABS triangular 4.0x1000 mm 90º
1 x	Perfil de ABS "L" 1.5x1.5x1000 mm
2 x	Perfil de ABS rectangular 12x6,0x1000 mm
1 x	Perfil Acero Inox. 10.5x5.7x1000 mm
2 x	Canal de ABS de 8,0x4,0x1000 mm
1 x	Perfil de ABS cuadrado 4 x 1000 mm
1 x	Perfil de ABS "T" 6.0x6.0x1000 mm
1 x	Perfil de ABS de media caña 8,0x1000 mm
1 x	Perfil goma 6-2 mm 2M
2 x	Conector ABS "CRUZ" 4.0 mm x 1000 mm
3 x	Perfil de ABS "T" 2.0x2.0x1000 mm
2 x	Canal de ABS de 2,0x4,0x1000 mm
1 x	Perfil Acero Inox. 11.5x6.5x1000 mm
2 x	Perfil de ABS "T" 4.0x4.0x1000 mm
1 x	Perfil de ABS triangular 2.0x1000 mm 90º
1 x	Perfil Acero Inox. 15.5x8.5x1000 mm
2 x	Perfil de ABS de media caña 2,5x1000 mm
1 x	Perfil de ABS "L" 6,0x6,0x1000 mm
1 x	Perfil de ABS cuadrado 1 x 1000 mm
1 x	Perfil de ABS "L" 5,0x5,0x1000 mm
1 x	Canal de ABS de 3,0x6,0x1000 mm
1 x	Canal de ABS de 5,0x10,0x1000 mm
2 x	Canal de ABS de 1,0x2,0x1000 mm
1 x	Perfil Acero Inox. 7.5x4.5x1000 mm
1 x	Interruptor largo dos posiciones FUTABA
1 x	Antena FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
1 x	Refueling Cap V3 Black
1 x	Alicate para hacer "Z"
1 x	Destornillador allen 2,5x60 mm molibdeno
1 x	Espuma caja emisora FUTABA longe case
1 x	Correa V2 doble
1 x	Pupitre FUTABA 14SG/16SZ
1 x	Capuchón M interruptor aluminio rojo
1 x	Prolongador Cable S-Bus
1 x	Conector equilibrado XH (9S) hembra (2 pcs)
1 x	Conector XT-150 6mm (Set: 5 pares)
1 x	Conector equilibrado XH (6S) macho (2 pcs)
1 x	Conector MT-60 (pareja)
1 x	Conector banana oro 4 mm
2 x	Soporte carbono MR30 (2 pcs)
1 x	Contacto macho pin conector (10 pcs)
1 x	Soporte conector MPX
1 x	Soporte conector MPX (2 pcs)
1 x	Conector MPX negro hembra
1 x	SBEC Jeti
2 x	Conector MR-60 (pareja)
1 x	Prolongador 5 lipos conector JST - JST/C
1 x	Adaptador 4,0 mm M8 para cono 40 mm hélice pleg.
1 x	Adaptador 3,2 mm M6 para cono 40 mm hélice fija.
1 x	Acoplador de aluminio para tubo de carbono 6/M4
1 x	Adaptador 3,0 mm M6 para cono 30 mm hélice pleg.
1 x	Adaptador 5,0 mm M8 para cono 40 mm hélice pleg.
1 x	Prisionero aluminio 3 mm Ø (4 uds)
1 x	Prisionero allen M4x4
1 x	Adaptador 2,3 mm M5 para cono 30 mm hélice fija.
1 x	Adaptador de hélice 2,3 mm M4 (Günther)
1 x	Prisionero aluminio 2 mm Ø (4 uds)
2 x	Adaptador de hélice 3,2 mm M5
1 x	Disipador axial para motores MPJ AC 25/25-xx
1 x	Disipador radial para motores MPJ AC 25/25-xx
1 x	Prisionero aluminio 4 mm Ø (4 uds)
1 x	Adaptador 3,2 mm M8 para cono 40 mm hélice pleg.
1 x	Adaptador de hélice 2,3 mm M5
1 x	Adaptador 4,0 mm M6 para cono 30 mm hélice pleg.
1 x	Prisionero allen M3x3
1 x	Adaptador 3,2 mm M5 para cono 30 mm hélice fija.
1 x	Ball link ALU M2,5/2 con rodamiento (1 pcs)
1 x	Adaptador de hélice 2 mm M5
1 x	Adaptador de hélice 4 mm M6
1 x	Prisionero aluminio 3.5 mm Ø (4 uds)
1 x	Prisionero aluminio 2.5 mm Ø (4 uds)
1 x	Ball link ALU M3/2 con rodamiento (1 pcs)
1 x	Dogdrive props 10 mm
1 x	Banda lijado g. 180 "Carburo de Silicio" para BSL 220/E (5 pcs)
1 x	PILATUS PC-6 Turbo Porter 33% 5.290 mm
1 x	Hélice 8x4,3 SlowFlyer
1 x	Cono 42 mm EXTRA 330SC
1 x	Regulador X-30-Pro BEC
1 x	Regulador MasterSPIN 70 Pro OPTO
1 x	Regulador Master MEZON 120
1 x	Guías externas para antena de 2,4 GHz blancas (2 pcs)
1 x	Interruptor OPTO Gas Engine
1 x	Prolongador macho/hembra equilibrador Thunder Power 6S
1 x	Interruptor magnetico para DPSI RV Family
1 x	Interruptor electronico JETI SP06 Opto
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Extintor CO2 - 2 Kg
1 x	Arandela prop. ZG45SL, ZG62/S/SL y ZG74B/ZG80B
1 x	Clips scape Ø25 mm
1 x	Conector ABS "L" 4.0 mm x 1000 mm
1 x	Perfil de ABS de media caña 4x1000 mm
1 x	Cinta autoadhesiva 13 mm x 16.80m; Diente 0.5 mm
1 x	Perfil de ABS de media caña 5,0x1000 mm
1 x	Cinta autoadhesiva 20 mm x 12m; Diente 1.0 mm
1 x	Captador DA50/100/150
1 x	Perfil Acero Inox. 14.5x9.6x1000 mm
1 x	Bisagra correa de latón en miniatura 1m
1 x	Conector ABS "L" 1.5 mm x 1000 mm
1 x	Hélice Electric Carbon 6.5x4
1 x	LENTUS MultiplexTren aterrizaje
1 x	Cargador USB 120-240V AC
1 x	PARKMASTER PRO Kit + (RR)
1 x	Adaptador equilibrador HITEC (XH)
1 x	Interruptor Magnetico MULTIPLEX
1 x	FunCup XL RR
1 x	Regulador MasterBasic 70SB
1 x	Regulador MasterSPIN 99 Pro OPTO
1 x	Regulador MEZON 115 Opto
1 x	Regulador MasterBasic 40SB
1 x	Regulador MasterSPIN 80 Pro
1 x	Regulador MasterBasic 55SB
1 x	Regulador X-55-SB-Pro
1 x	Regulador X-75-OPTO-Pro
1 x	TMM 1210-3S heli
1 x	Bateria FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ
1 x	Bancada receptor (Azul)
1 x	Caja servo FUTABA S9650/9670SV
1 x	Emisora FUTABA T18 SZ + R7208SB
1 x	Caja servo BLS-152 / 172
1 x	Pupitre Contest-SPult mc-20/mc-24
1 x	Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C
1 x	Conector 5,0 mm EC5 macho con funda (2 pcs)
1 x	Conector FUTABA Servo hembra BLUE silicon (10 pcs)
1 x	Conector MULTIPLEX hembra 30 cm
1 x	Conector 5,0 mm EC5 hembra con funda (2 pcs)
1 x	Soporte conector MPX macho (6 pcs)
1 x	Conector XT60 macho empotrar (2 pcs)
1 x	Conector MPX 8 pins (verde) 1 par (macho-hembra)
1 x	Conector JR Servo hembra (10 pcs)
1 x	Prolongador equilibrador Thunder Power 6S
1 x	PowerBox SparkSwitch RS
1 x	Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Tuerca hexagonal M2.5 (10 pcs)
1 x	Interruptor On/Off Corto micro
1 x	Varilla mando doble roscada aluminio M2,5 70 mm (2 pcs)
1 x	Rótula larga M3 con bola/tornillo (6 uds)
1 x	Tornillo M2x8 PH
2 x	Adaptador de hélice 3 mm M5 (largo)
1 x	Adaptador 5,0 mm M6 para cono 40 mm hélice fija.
1 x	Arandela 2.7 mm (20 pcs)
1 x	Horn de mando largo con rodamiento (2 ud)
1 x	Interruptor electronico JETI SP6 0-15v/6A
1 x	Prolongador 2/3 lipos conector JST - JST/C
1 x	Horn mando small (2 pcs)
1 x	Varilla mando doble roscada aluminio M3 80 mm (2 pcs)
1 x	Bomba Humo Variable
1 x	Tuerca hexagonal M4 (10 pcs)
1 x	Tuerca hexagonal M1,6 (10 pcs)
1 x	Tuerca para montaje M2,5 (4 pcs)
1 x	Bisagra Micro flexible (12 uds)
1 x	Tuerca autoblocante M2.5 (10 pcs)
1 x	Arandela dentada 3.2 mm (20 pcs)
1 x	Reductora BB motor 480 eje 3,2mm (3,5:1)

9,563.13EUR