Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Hélice BIELA 28x12 3Bl (Tripala)
145.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Acoplador M2,5 Ø 2 mm (10 pcs)
1 x	Acople ALU M3 Ø 6 (2 uds)
1 x	Acople ALU M2,5 Ø 6 (2 uds)
1 x	Acople ALU M2,5 Ø 3 (2 uds)
1 x	Clevis con trasmisión M3
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Acople ALU M2 Ø 4 (2 uds)
1 x	Acoplador "Z" Ø 1 (2 uds)
1 x	Acople ALU M3 Ø 4 (2 uds)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Ball link aluminio M3 V1 (10 pcs)
1 x	Acople ALU M2,5 Ø 4 (2 uds)
1 x	Ball link M2 (10 pcs)
1 x	Ball link ALU M2/2 con rodamiento (1 pcs)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Acoplador M3 (10 uds)
1 x	Acoplador M2 (10 uds)
1 x	Ball link latón BS M3 V1 (10 pcs)
2 x	Acople ALU M3 Ø 5 (2 uds)
2 x	Ball link ALU M2,5/2 con rodamiento (1 pcs)
2 x	Ball link Aluminio M3 (2 pcs)
1 x	Acoplador "Z" Ø 1.8 (2 uds)
2 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Acoplador "Z" Ø 2 (2 uds)
1 x	Crimping sleeves para cables de 1.1 mm (10 pcs)
1 x	Acoplador M2,5 Ø 3 mm (10 pcs)
1 x	Alicate para hacer "Z"
2 x	Barra pegamento caliente Negro
2 x	Barra pegamento caliente Rojo
1 x	Bomba de vacio P1-N
1 x	Banda lijado g. 120 para BSL 220/E (5 pcs)
1 x	Crimpadora
1 x	Banda lijado g. 80 para BSL 220/E (5 pcs)
2 x	Destornillador allen 1,5x50 mm molibdeno
3 x	Bascula precisión 0.1- 600 g
2 x	Destornillador Torx® TX6
2 x	Banda lijado g. 180 "Carburo de Silicio" para BSL 220/E (5 pcs)
1 x	Bomba de vacio 12 CFM completa
2 x	Alicate para "Ball-Link"
2 x	Crimpadora
1 x	Barra pegamento caliente Verde
2 x	Copiador 5 unidades de 20 cm
1 x	Iniciadores para AX-60 (5 pcs)
1 x	Piloto 1/6 "Tony"
1 x	Carro remolque para veleros 720 x 239 mm
1 x	Soporte Antena 2.4 Ghz (2 pcs)
1 x	Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6
2 x	Pincel Gr.5
2 x	Fresa corte diamante Ø 2.7mm (bola)
2 x	Soporte lija 25 mm
2 x	Mini-clip
1 x	Hoja sierra 8 mm OZI220E
1 x	Funda plancha entelar STD
1 x	Bolsas inyectoras desechables (30x16cm) 100 pcs
2 x	Arrancador Sullivan-STAR 603 DINATRON
1 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Motor A2212/13T
1 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	Destornillador Allen 1.5 mm
1 x	Goma arrancador KAVAN "soft"
2 x	Conector "T" 6-6-6 mm tubo bomba vacio
2 x	Alicate para "Ball-Link"
2 x	Punta recambio soldador KAVAN 668838
1 x	Set brocas PROXXON 0.5-3.2mm (10 pcs)
1 x	Destornillador allen 2,0x50 mm molibdeno
2 x	Fresa corte diamante Ø 2.35mm (flame)
2 x	Lijadora triangular OZI/E
1 x	Soldador pequeño 100 w/230 v
1 x	Tubo bomba vacio 8/6 mm transp. (25 m)
1 x	Copiador 2 unidades de 20 cm
1 x	Tijera curva PREMIUM 16 cm
1 x	Llaves mini mordaza/bloqueo (2 uds)
1 x	Set Perma-Grit "Fine" 7 piezas
1 x	Acumulador polvo para limpieza moldes
1 x	Herramienta para desmontar kwik link
1 x	Motor SAITO FG-61 TS
1 x	Fresa corte diamante Ø 1.0mm (bola)
2 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Mango para lima PERMAGRIT
2 x	Bascular < 40 Kg
1 x	Perforador hélices 5/6,3/8/9
1 x	Programador HPP-21 PLUS HITEC digital servos PC
1 x	Escape O-Ring ZIMMERMANN FG-84/90 R3
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Anemometro Xplorer3
1 x	Cono hélice plegable 30 mm diámetro / eje 3,2 mm
1 x	Cono aluminio hélice pleg. 30 mm diámetro / eje 3,0 mm
1 x	Cono autoventilado hélice plegable 40 mm diámetro / eje 3,0 mm
1 x	Plancha termoformable 0,3 mm (0,039") DIN A4
1 x	Rodamiento 6002 DLE
1 x	Chaveta DLE 85/111/120
1 x	NF-1 RC set
1 x	Jaula agujas DA-50R/100/100L/120
1 x	Soporte helice largo 60mm ZG45SL-ZG62/S/SL y ZG80B
1 x	Motor DA 60
1 x	Junta culata MVVS 30 cc (3 pcs)
1 x	Juntas DLE-120
1 x	Encendido ROTO 25V
1 x	Led (naranja - 2 pcs)
1 x	Pipa bujía DLE-111
1 x	Junta carburador aislante para ZG22/23/26/ZG231/G2D96-D/G230R
1 x	Led Flash (rojo - 2 pcs)
1 x	8Wx2 Navigation & Strobe, 11mm Green/White
1 x	Circlip DA-50R/60/100/100L/120 (1 pcs)
1 x	Juntas DLE-20
1 x	Toma combustible carburador ZG45SL, ZG62/S/SL y ZG74B/ZG80B
1 x	Tubo teflon Dia. 20x15 mm para escape
2 x	Tubo escape flexible acero inox. Dia.25 mm x 50 cm
1 x	Separador carburador ZG38/S/SC
1 x	Escape O-ring Saito FG-73 5cyl
3 x	Varilla empujador MOKI S250 (1 pcs)
1 x	ZENOAH ZG 80B
3 x	Brazo carburador con extension MOKI S250
1 x	Rueda KOVO SLH 120x60 mm
1 x	Cono aluminio hélice pleg. 40 mm diámetro / eje 4,0 mm
1 x	Cono autoventilado hélice plegable 40 mm diámetro / eje 3,2 mm
1 x	Doblador de tubos
1 x	Varilla silverlot 45% - 1,50x500 mm (2 pcs)
1 x	Rueda de acero Proxxon/Dremmel 2,35 mm
1 x	Arrancador Sullivan-STAR 601
1 x	Guante Latex GRIP Talla L
1 x	Soporte soldadura universal aluminio
1 x	Lima redonda PERMAGRIT 18 mm para Dremel
1 x	Hoja sierra 65mm 160 Dientes para OZI/E
1 x	Destornillador Allen 1.27 mm
1 x	Tijera Aramid 21 cm/8" PROTON
1 x	Medidor de ángulos digital para helicóptero
1 x	Conexión de vacío VA 1 (para manguera Ø 6 mm)
1 x	Plancha entelar Profi LCD
1 x	Guantes M vynyl IDEAL Light (100 pcs)
1 x	Destornillador Torx® TX8
1 x	Plancha para entelar mini
1 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x	Cono Aluminio hélice fija 30 mm diámetro / eje 2,3 mm
1 x	Anemometro Xplorer4
1 x	Tapa de servo estándar 90x75 mm
1 x	Avia (Top Model)
1 x	Cono aluminio 34 mm / 3.17 mm helice plegable
1 x	Bayoneta aluminio ø35×1.5 mm x 500mm
1 x	Bancada servo ala 11 mm
1 x	Tubo teflon Dia. 25x20 mm para escape
1 x	Trompeta DA 50-R con flange y 2 M5x60
2 x	Extension escape MOKI 200 mm
1 x	Escape Moki 100 BVT
1 x	Rodamiento delantero DA-85/100/100L/120/150/170
1 x	Motor Moki 180
1 x	Resina Molde P 10 kg
1 x	Cono Aluminio hélice fija 40 mm diámetro / eje 3,0 mm
1 x	Cono NUT M5
1 x	RANGER Jet Red/Yellow 1.854 mm combo
1 x	RANGER Jet Red/White 1.854 mm combo
1 x	Corta tubos aire
1 x	Astra (Top Model)
1 x	Bidule 111 3000 mm, Cabina
1 x	Tapa de servo micro 58 mm
1 x	Soporte trasero 7 mm para motor gasolina
1 x	Tapa de servo micro-mini 57 mm
1 x	Albatros rojo/blanco (Top Model)
1 x	Avia, fuselaje reforzado en fibra de carbono(Top Model)
1 x	BULLIT 60 Ala 1095 mm
1 x	Tapa de servo mini 65 mm
1 x	Bidule 170 ARF 3.48 m
1 x	Bancada servo ala 13 mm
1 x	Bayoneta aluminio ø35×1.5 mm x 1m
1 x	Gancho de lanzamiento regulable
1 x	Bancada servo ala 18 mm
1 x	Avia, cabina azul(Top Model)
1 x	Medidor ángulos
1 x	Astra Bayoneta (Top Model)
1 x	Soporte trasero 40 mm para motor gasolina
1 x	Soporte resonador 60 mm
1 x	Tubo escape flexible acero inox. Dia.25 mm x 30 cm
1 x	Soporte trasero 10 mm para motor gasolina
1 x	Soporte trasero 15 mm para motor gasolina
1 x	Tubo teflon Dia. 16x35 mm para escape
1 x	Soporte trasero 5 mm para motor gasolina
1 x	Soporte trasero 30 mm para motor gasolina
1 x	Rodamiento medio DA-50/60/170/VM120B2
1 x	Prop Hub DA-100/100L
1 x	Soporte motor DA-100/100L/120
1 x	Separador carburador DA-60/70
1 x	Tornillo carburador DA100/120/200
2 x	Conector banana oro 2 mm
2 x	Motor Moki 100 BVT
2 x	Filtro aire MOKI
2 x	Captador Moki 250 cc 7 cilindros
2 x	Motor MOKI 160 BVT boxer 4-stroke
2 x	Juntas carburador MOKI
2 x	Perforador helice MOKI S150/S180/S215/S250
1 x	Tubo admisión MOKI S250
1 x	Carburador Moki S250
1 x	Soporte de alumino motor DA-50R
1 x	Tubo teflon Dia. 25x5 mm para escape
1 x	Rodamiento delantero DA-50/60/170/VM120B2
2 x	Motor Moki S 300 cc 5 cilindros
1 x	Motor MOKI S 350 cc 7 cylinder
1 x	Motor Moki S 250 cc 5 cilindros
1 x	Bisagra de compuerta negra 30x16 mm (2 pcs)
1 x	Controlador autoarranque MOKI S250
1 x	Deflector madera MOKI S250/330 mm
1 x	Deflector madera MOKI S180/320 mm
1 x	Conector banana oro 3,5 mm
1 x	Carburador Moki S400

47,945.17EUR