4.50EUR

CA Glue fast 20g
[R1501032]


CA Glue fast 20g
Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Sparkplug NGK CM6
Sparkplug NGK CM6

temporarily out of stock
temporarily out of stock

TYGON tubo 1 m Diam. 3.4 x 2.0  mm
TYGON tubo 1 m Diam. 3.4 x 2.0 mm

temporarily out of stock
temporarily out of stock

Tygon tube 6.35 - 3.18 mm 1m
Tygon tube 6.35 - 3.18 mm 1m

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 23x8
Propeller MENZ-S 23x8

temporarily out of stock
temporarily out of stock

Conector BEC male (10 pcs)
Conector BEC male (10 pcs)

temporarily out of stock
temporarily out of stock

Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)

temporarily out of stock
temporarily out of stock

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Angled clevis with threaded rod M3
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Z type of cable coupler Ø 1 (2 uds)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Threaded coupler M3 (10 uds)
1 x Threaded coupler M2 (10 uds)
1 x Brass ball links BS M3 V1 (10 pcs)
2 x Threaded coupler ALU M3 Ø 5 (2 uds)
2 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
2 x Ball link Aluminio M3 (2 pcs)
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Z type of cable coupler Ø 2 (2 uds)
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Z Bender - S Type Tool
2 x Hot Glue Stick BLACK
2 x Hot Glue Stick RED
1 x Vacuum pump P1-N
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x Crimping tool
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
2 x 1,5x50 mm allen screwdriver
3 x 
2 x Screwdriver for Torx® TX6
2 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x Vacuum pump 12 CFM
2 x Ball Link Plier
2 x Crimping tool
1 x Hot Glue Stick GREEN
2 x Copier 5x20 cm pcs
1 x AX-60 starters (5 pcs)
1 x 1/6 Pilot "Tony"
1 x Truck-trailer for gliders 720 x 239 mm
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6
2 x Schul-Malpinsel Gr.5
2 x Fresa corte diamante Ø 2.7mm (bola)
2 x 25 mm Sandpaper file
2 x Mini-handed clamp
1 x PROXXON - SAW BLADE 8MM 0ZI220E
1 x Sealing Iron Sleeve STD
1 x Disposable Injector Bags (30x16cm) 100 pcs
2 x Starter Sullivan-STAR 603 DINATRON
1 x Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x Motor A2212/13T
1 x Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x Screwdriver for Hexagon 1,5mm
1 x Rubber Insert soft, 1 Pcs.
2 x 
2 x Ball Link Plier
2 x Soldering tip for KAVAN soldering iron KAV66.8338
1 x PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
1 x 2,0x50 mm allen screwdriver
2 x Fresa corte diamante Ø 2.35mm (flame)
2 x PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E
1 x Smart Soldering Iron 110W/230V AC
1 x Pump hose (Ø 6/8 mm) transparent
1 x Copier 2x20 cm pcs
1 x Fabric scissors curved Premium, 16 cm / 6" length
1 x Mini Lock Grips 2PCS
1 x Boxed KIT OF 7 Rotary Burrs FINE
1 x Dust collector for mould cleaning
1 x Kwik link unmount tool
1 x Motor SAITO FG-61 TS
1 x Fresa corte diamante Ø 1.0mm (bola)
2 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x Handle for PERMAGRIT lime
2 x Digital scale up to 40 kg
1 x Propeller diller 5/6,3/8/9
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Escape O-Ring ZIMMERMANN FG-84/90 R3
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Xplorer3 anemometro
1 x Spinner propeller pleg. 30 mm / 3,2 mm
1 x Spinner Alumin. propeller pleg. 30 mm / 3,0 mm
1 x Spinner propeller pleg. 40 mm / 3,0 mm
1 x Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x Ball bearing 6002 DLE
1 x DLE 85/111/120 Crankshaft keyway
1 x NF-1 RC set
1 x Bearing upper rod DA-50R, DA-60, DA-100, DA-100L, DA-120
1 x 60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B
1 x Motor DA 60
1 x Head Gasket 30cc (3 pcs)
1 x Gasket set DLE-120
1 x Ignition RM-25V
1 x LED wire (orange - 2pcs)
1 x DLE 111 pipe plug
1 x Gasket Carburetor-Insulator ZG22/23/26/ZG231/G2D96-D/G230R
1 x LED blink wire flashing (red - 2pcs)
1 x 8Wx2 Navigation & Strobe, 11mm Green/White
1 x Cer clip DA-50R, DA-60 DA-100 DA-100L DA-120, 1 piece
1 x Gasket set DLE-20
1 x Carburettor and crankcase nipple for ZG45SL, ZG62/S/SL and ZG74B
1 x Dia. 20x15 mm teflon tube for escape
1 x 50cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x Insulator block ZG 38/S/SC
1 x O-ring Saito FG-73 5cyl
1 x Moki Pushrod S250 (1 pcs)
1 x ZENOAH ZG 80B
1 x Moki Carburetor Throttle Arm with Extension
1 x 120x60 mm SLH KOVO wheel
1 x Spinner Alumin. propeller pleg. 40 mm / 4,0 mm
1 x Spinner propeller pleg. 40 mm / 3,2 mm
1 x Tube bender
1 x silverlot 45% - 1,50x500 mm solder rods (2 pcs)
1 x Steel brush wheel with 2.35mm
1 x Starter Sullivan-STAR 601
1 x Latex Gloves GRIP, size L, box/ 100 pcs
1 x 
1 x Dremel PERMAGRIT 18 mm round lime
1 x PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH
1 x Screwdriver for Hexagon 1,27mm
1 x Aramid fibre shears Proton®, 21 cm / 8" length
1 x Heli digital angle measurer
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x Sealing Iron Profi LCD
1 x Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs
1 x Screwdriver for Torx® TX8
1 x Tool for entel
1 x Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x Spinner Alumin. fixed propeller 30 mm / 2,3 mm
1 x Xplorer4 anemometro
1 x 90x75 mm standart servo cover
1 x Avia (Top Model)
1 x 34 mm Alu spinner 3.17 mm pleg. propeller
1 x Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x 11 mm wing servo holder
1 x Dia. 25x20 mm tefon tube for escape
1 x Intake tube with flange and 2 M5x60
1 x Moki Exhaust Bend 200 mm
1 x Escape Moki 100 BVT
1 x Crankshaft bearing front, DA-85, DA-100 DA-100L DA-120 DA-150 DA
1 x Motor Moki 180
1 x Mould Resin P 10 kg
1 x Spinner Alumin. fixed propeller 40 mm / 3,0 mm
1 x Spinner NUT M5
1 x RANGER Jet Red/Yellow 1.854mm combo
1 x RANGER Jet Red/White 1.854mm combo
1 x Cut tube
1 x Astra (Top Model)
1 x Bidule 111 3000 mm Canopy
1 x 58 mm micro servo cover
1 x 7 mm gas motor standoff
1 x 57 mm micro-mini servo cover
1 x Albatros red/white (Top Model)
1 x Avia spare fouselage CF reinforced (Top Model)
1 x BULLIT Wing 1095 mm
1 x 65 mm mini servo cover
1 x Bidule 170 ARF 3.48 m
1 x 13 mm wing servo holder
1 x Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x Adjustable launching hook
1 x 18 mm wing servo holder
1 x Avia spare blue cockpit (Top Model)
1 x Angle measurer
1 x Astra wing Joinner (Top Model)
20,292.08EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies