Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Beaver DHC-2 DeHavilland 3000mm White/Black CYMODEL
975.02EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	SIMtransmitter 6 Mode 2
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Round Rod 4,0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Strip 1,5x1,5x330 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	Round Rod 2,0x1000 mm
1 x	Round Rod 3,0x1000 mm
1 x	Round Rod 1,0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	Round Rod 1,25x1000 mm
2 x	Round Rod 1,5x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Round Rod 5,0x1000 mm
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
2 x	XH female balance (5S) connector (2 pcs)
2 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	XH male balance (5S) connector (2 pcs)
1 x	2,0x50 mm allen screwdriver
1 x	XH male balance (4S) connector (2 pcs)
1 x	Crimping tool
2 x	Optotronix Aurora Plug
1 x	XH female balance (3S) connector (2 pcs)
1 x
1 x	Screwdriver for Hexagon 1,27mm
2 x	Banna gold connector 2,5 mm (M/F)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	Connectors banna oro 0,8 mm (M/F)
2 x	Digital scale up to 40 kg
2 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
2 x	2,5x60 mm allen screwdriver
1 x	Starter EM Gear Power 80
1 x	Connector CAN 15
2 x	Hot Glue Stick RED
2 x	2 mm female connector (2 pcs) with safety connector
2 x	Ball Link Plier
1 x	Dust collector for mould cleaning
3 x	Conector BEC male (10 pcs)
2 x	Connectors banna oro 3,5 mm (M/F)
2 x	Starter EM Gear Power 250
1 x	Connectors DEANS 4 pins (1 pair)
1 x	1,5x50 mm allen screwdriver
1 x	Connectors banna oro 4 mm (M/F)
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	3,0x60 mm allen screwdriver
1 x	Connectors banna oro 8,0 mm (M/F)
2 x	Connectors banna oro 3 mm (M/F)
2 x	XH female balance (2S) connector (2 pcs)
2 x	Connectors banna gold 5,5 mm (M/F)
1 x	Hexagonal ball head 2.0 x 50 mm
2 x	Hot Glue Stick BLACK
1 x	Z Bender - S Type Tool
1 x	30 cm DEANS female connector
2 x	Connectors banna oro 2 mm (M/F)
1 x	Z Bender - S Type Tool
2 x	Copier 5x20 cm pcs
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Conector Servo female 4 pines
1 x	Screwdriver for Torx® TX6
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
3 x	Simulador RealFlight RF-9.5 S (sin emisora)
2 x	Interface Jack Adapter IKARUS
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Interface Realflight Simulator
2 x	Brass rod Ø 1.5 mm x 1000 mm
2 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Extension silicon 30 cm female (Futaba)
1 x	A/C economy plywood 600x300x6+.0 mm
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Parachute PV6 for F3J
1 x	MPX housing with flange (4 pcs)
1 x	Gold antispark 5,5 mm plug
1 x	Screwdriver for Hexagon 1,5mm
1 x	Pump hose (Ø 6/8 mm) transparent
1 x	Mounting frame MPX female connector
1 x	Servo Connector Brackets (10 pcs)
2 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Steel brush wheel with 2.35mm
1 x	XH male balance (8S) connector (2 pcs)
1 x	Connectors DEANS (T)
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Conector XT-30 (hembra)
1 x	Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x	Conector FUTABA Servo male BLUE silicon (10 pcs)
2 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Conector XT-150 6mm (Set: 5 pares)
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x	Propeller diller for DLE111 and DA85-150
1 x	Heli digital angle measurer
1 x	Kwik link unmount tool
1 x	Pistola termica MH 550 micro
1 x	PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
1 x	Propeller drill jig DA 100/85/120/150/200 and VM 60-210
1 x	Laminating brush 10 mm, pack/ 50 pcs
1 x	Mini-handed clamp
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	SE Ring 200 mm (2 pcs)
1 x	Glow Plug Clip 1.3 Ah
1 x	EasyFLY Addon
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Slave-cable USB Easy Sim
1 x	4 mm Prop Adapter CN-Spinner
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	2 mm Prop Adapter M6
1 x	Prop Shaft Adapter 4 mm/M8 "long" 35 mm
1 x	4 mm Prop Adapter M8
1 x	Starter Sullivan-STAR 601
1 x	Crimping tool
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	3 mm Prop Adapter M6
1 x	Digital precision scale up to 2000 g
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	3 mm Prop Adapter M6
1 x	Hardener Aero EPH 161 (250 g)
1 x
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	XH female balance (8S) connector (2 pcs)
1 x	Red 4 mm connector holder
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Cut tube
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Connectors MPX male (PIN double)
1 x	Vacuum pump P1-N
1 x	XH female balance (9S) connector (2 pcs)
1 x	XH male balance (9S) connector (2 pcs)
1 x	XH female balance (7S) connector (2 pcs)
1 x	XT-60 connector (female)
1 x	Connectors MPX black female
1 x	Motor PERMAX BL-O 3520-920 (Extra 330 SC)
1 x	Program card KAVAN PRO
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 240 mm (2 pcs)
1 x	Powerset FunJet 2 with Vectorcontrol unit
1 x	Charger LiPo Charger4
1 x	Decorative caps, multicoloured
1 x	10 mm Prop Adapter M12
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	3.2 mm Prop Adapter M6
1 x	Canopy Latch
1 x	4 mm Prop Adapter M6
1 x	2.3 mm Adapter for 30 mm spinners
1 x	Flap hinge (6 pcs)
1 x	Set clevis for pull-pull (TY13233 & TY13234)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	SE Ring 300 mm (2 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	20x1000 mm Ring Strap Back To Back
1 x	SE Ring 250 mm (2 pcs)
1 x	SE Ring 400 mm (2 pcs)
1 x	SE Ring 350 mm (2 pcs)
1 x	Marker ties (20 pcs)

4,177.86EUR