Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Resin/Gelcoat » R1401601

32.00EUR

White gelcoat 1 Kg
[R1401601]

Ready to use*
Tack-free curing
Paraffin-free
Preaccelerated with cobalt
Can be dyed with our universal colour pastes
Thixotropic (non-drip) polyester gel coat that cures to yield tack-free white top layers in conjunction with epoxy laminates.
Processing time with 2 % MEKP: approx. 15-20 minutes
Consumption (at a layer thickness of 0.4 mm): approx. 0,5 kg/m²
Colour: White (following RAL 9010)
An epoxy resin laminate can be applied after approximately 2 to 24 hours of curing time. It Can also be used as topcoat on cured laminates.
Can be diluted with styrene.
*Store containers below 20 °C and tightly closed, shelf life will then be about 6 months.
Please order MEKP hardener separately
Laminate structures for vehicle construction in combination with this product are approved by the TÜV-Süd.
Due to limited shelf life, we produce this product freshly thus we are able to guarantee best quality and max. storage life. This fact can sometimes lead to a supply shortage.

under request

Reviews

Customers who bought this product also purchased

Servo HITEC HSB-9380TH under request	Epoxy L 40 min. 10 kg (Resin) under request	Silicone black 4,0 qmm wire (25 m) under request
XT-60 connector (male) under request	T- Fittings blue color (2pcs) under request	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) under request

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

SAITO FG-120 TSS Boxer 4T
1,800.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Cierre cabina aluminio Ø5, I=16 mm
2 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	SUS wire 3m (nylon coated)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	One touch canopy lock
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Cockpit plastic closing
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Para-RC "RC-Evo-Cross" Rescue
2 x	Opale Rucksack
2 x	Paramotor Trike XL
1 x	Set cintas unión paracaídas 145 cm
1 x	Rescue 1,8m2 / BackPack
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Parachute PV6 for F3J
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Extension silicon 100 cm (Graupner)
1 x	Cable S.BUS 3 salidas 100 mm
3 x	Extension silicon 100 cm (Futaba)
2 x	200 mm extensión servo HITEC/JR
1 x	Premium servo extension 75cm
1 x	Extension silicon 35 cm male (Futaba)
1 x	Solvent Plasti Dip 1000 ml
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	Spray YELLOW Inca Lexan 150ml
1 x	Universal Colour Paste deep black 250 g
1 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Spannlack 1000 ml
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Universal Colour Paste white 50 g
1 x	Plasti Dip Liquid Tape 429 ml orange
1 x	Release wax 250ml
1 x	DPSI Ampere battery backer
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	LOWER TOW HOOK
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 240 mm (2 pcs)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	100 mm rods + T patellas set for direction control
2 x	LUCAS pilot ARTF
1 x	Ballast 700gr OPALE
1 x	White gelcoat 1 Kg
1 x	Wing OXY 0,5 pulgadas2
1 x	resin-hardener package L-385 with hardener H-385
1 x	Para-RC Mix
1 x	Epoxy Resin L (2.5 Kg)
1 x	Circlick securite
1 x	MAX pilot ARTF
1 x	Extension silicon 25 cm (Futaba)
1 x	Futaba Female 40 cm extension
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Parachute P4
1 x	Extension silicon 50 cm (Graupner)
1 x	Paramotor BackPack XXS (without accessories)
2 x	Cabel "Y" 30 cm (graupner)
1 x	Extension silicon 10 cm (Graupner)
1 x	Extension silicon 30 cm female (Graupner)
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Extension silicon 30 cm male (Futaba)
1 x	Extension silicon 50 cm (Futaba)
2 x	Extension 15 cm (Futaba)
1 x	Futaba Female 40 cm extension
1 x	Paramotor BackPack XXS 2
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Extension silicon 25 cm (Graupner)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
2 x	Cable S.BUS 3 salidas 300 mm
1 x	Extension silicon 30 cm male (Graupner)
1 x	Premium servo extension 100cm
1 x	Retract undercarriage
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	Civilian pilot "Curt" size 9cm (Slimline)
2 x	Pilot "Goose" (Slimline)
1 x	Ball Link Plier
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	Bateria LRP 2200-7.2v 6 cell NiMH
1 x	Vasa model Catapult
1 x	12V Car Adapter
1 x	AC-10 pre-rotacion with motor
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Piloto Jet "Red" 1/6 Scale
1 x	1/12 Pilot "Cougar"
1 x	Pilot JAN 1/4 Saiplanes
1 x	1/6 Pilot "John"
1 x	1/12 Pilot "Langley"
1 x	Spinner INOVA 102 mm Black
1 x	Spinner INO 89 mm Chrome (Imitacion metal)
1 x	Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x	Spinner INOVA 45 mm White

5,909.66EUR