1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Connectors banna oro 2 mm (M/F)
1 x Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x Conector JR Servo male (50 pcs)
1 x 2 mm female connector (2 pcs) with safety connector
1 x 30 cm DEANS female connector
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Conector FUTABA Servo male (10 pcs)
2 x Conector JR Servo female (10 pcs)
1 x Conector JR Servo female (50 pcs)
1 x Conector male bateria 1s Kavan/Walkera 10cm cable
1 x Connectors banna oro 3 mm (M/F)
1 x ABS Strip 1.0x4.0x1000 mm
2 x Round Rod 6,0x1000 mm
1 x Strip ABS 2.0x8.0x1000 mm
2 x Round Rod 1,0x1000 mm
1 x ABS I Strip 10x5x1000 mm
2 x Strip ABS 2.0x5.0x1000 mm
1 x ABS Strip 1.5x3.0x1000 mm
1 x Strip 2,0x2,0x330 mm
1 x ABS Strip 1.5x8.0x1000 mm
1 x ABS Strip 1.5x4.0x1000 mm
1 x Joint with bearing M3 22x5,5
1 x Socket head long ball link M3 (6 uds)
1 x Oratex Silver 2m
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Battery LiPo GENS 2200 mAh 2S 7.4v 60C (Gens Ace)
1 x ABS Strip 1.0x5.0x1000 mm
1 x Battery LiPo GENS 5000 mAh 2S 7.4V 60C (Gens Ace)
2 x Protector Connector MPX (1 pair)
1 x PIN Connector female (100 pcs)
2 x Mounting frame MPX male connector
1 x Conector MR-60 (pareja)
1 x XH LiPo extension lead
2 x XH female balance (9S) connector (2 pcs)
1 x Connectors MPX male
2 x Red 4 mm connector holder
1 x XH female balance (3S) connector (2 pcs)
1 x Gold antispark 4 mm plug
1 x MPX Support (2 pcs)
2 x XH female balance (6S) connector (2 pcs)
1 x Contacto macho pin conector (10 pcs)
1 x Soldering PCBs 8pin, 5 pieces
1 x XH male balance (3S) connector (2 pcs)
1 x MPX screwable clips (4 pcs)
2 x XH male balance (2S) connector (2 pcs)
1 x Connectors MPX female (PIN double)
3 x Wing connector 8pin with pin strip, plug & socket
1 x PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
1 x Universal Filter
1 x Sealing Iron Sleeve PROF
1 x 25 mm Sandpaper file
1 x Precision wrench L100 mm
1 x Xoar Electric Beechwood Prop 12x6
1 x Xoar Electric Beechwood Prop 20x10
2 x Optotronix Aurora Plug
1 x Bag connector 2 mm
1 x Red 3m5 mm connector holder
1 x Wing conexion 2 servos JR/Graupner 50 cm
1 x Conector XT-30 (hembra)
1 x Wing conexion 2 servos Futaba 50 cm
1 x 30 cm MULTIPLEX female connector
1 x Conector JAPAN G2 Set 5 pares
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Wing connector 8pin with pin strip, plug & socket
1 x Connectors MPX black male
1 x XT-90 connector (pair)
1 x 2 mm male connector (2 pcs) with safety connector
1 x Gold antispark 5,5 mm plug
2 x Magnetic Connect locking system
2 x Conector XT-30 (macho)
1 x Servo Connector Brackets (10 pcs)
1 x DPSI RV Mini 6 Magic with Gas-Cap switch
1 x Power Box GPS Sensor III
1 x PowerBox iGyro SRS
1 x Filter Capacitor JR
1 x Strip 2,5x1,25x330 mm
1 x Round Rod 1,25x1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x Battery LiPo GENS 4000 mAh 6S 22.2v 45C (Gens Ace)
1 x Battery LiPo GENS 120 mAh 2S 7.4V 30C (Gens Ace) F3P Pack
1 x Strip ABS 2.0x10.0x1000 mm
1 x Battery LiPo GENS 5000 mAh 12S 44.4v 60/120C (Gens Ace)
1 x Battery LiPo GENS 4000 mAh 6S 22.2v 25C (Gens Ace)
1 x Sanyo TX Battery Eneloop 9,6 V 2500 mAh
2 x DEMON CORTEXpro
1 x Battery LiPo GENS 5000 mAh 6S 22.2V 60C (Gens Ace)
1 x Radial heatsink for MPJ AC25/35-xx motor
1 x Cooler motor type 280
2 x Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x Servo NARO Max Std
1 x Cooler motor type 300
1 x Slave-cable USB Easy Sim
1 x Epoxy MID-CURE™ 15 min (130g)
1 x Epoxy SLOW-CURE™ 30 min (260g)
1 x EXTRA 300 78" V3 Yellow/Red/Blue
1 x Adapter 3,0 mm M8
1 x Adapter 4,0 mm M8
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Pistola termica MH 550 micro
1 x Propeller drill jig DA-35/50/60/70
1 x Sealing Iron Profi LCD
1 x 
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Xoar Electric Beechwood Prop 22x10
1 x Strip 1,5x1,5x330 mm
1 x Round Rod 4,0x1000 mm
1 x Hysol Mixing Caps SET with 10
1 x Heat sink for Optotronix LEDs
1 x DPSI Ampere & Voltage bundle
1 x DPS Switch JR/JR
1 x wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x wing/fuselage connector for 3 pines AWG 20-24
1 x Pipa 3D F-16 Scale 1/6
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Conector XT-150 6mm (Set: 5 pares)
1 x XH male balance (5S) connector (2 pcs)
1 x Sealing Iron STANDARD
1 x MPX 8 pins plug mold
1 x DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
1 x 55% silver electrodes (2 pcs)
1 x Extra Hard Titanium Herxagon Screwdrivers
1 x Mold plugs XT-90
1 x XT-60 Plug Mold
1 x Fabric scissors curved Premium, 16 cm / 6" length
1 x PROXXON - SAW BLADE DIAMOND OZI/E
1 x Digital scale up to 40 kg
1 x Heat Seal Iron
1 x Pump hose (Ø 6/8 mm) transparent
1 x LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
2 x Pilot LA 500
1 x LA500 ciclic lever
1 x Baal link 4/14/4 (5 pcs)
1 x Axi for motor A40-L Motor 8-Pole-Electric Turbine
1 x Motor A60-7XS V4 28-pole kv330
1 x Motor A40-10 L V2 14-Pole Glider
1 x Motor A50-14L Turnado V3 Glider
1 x AXI 2808/20 V2
1 x AXI 2217/12 V2
1 x Esc MasterSPIN 16 Pro
1 x ESC KAVAN PRO-160HV Opto 160 Amp
1 x Esc KOSMIK 200 HV
1 x Cooler motor type 400
1 x Round Rod 1,5x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x Tachometer HANGAR 9 digital
1 x Propeller diller for DLE111 and DA85-150
1 x Tool for entel
1 x LA500 pilot-seat set
1 x LA500 pre-rotation gear
1 x LA500 nose
1 x LA500 rotor head core
1 x LA500 cyclic central part
8,016.45EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies