Inicio » Catálogo » Motores y Turbinas » Turbinas » Queroseno » Turbinas XICOY » XIX95C

2,175.00EUR

Turbina XICOY X95 compact
[XIX95C]

Specifications
In the early 2000s, Wren Turbines launched the famous Wren44, the smallest engine available at the time. The diameter of the engine was only 76mm and in its earliest form, the MW44 developed 30N of thrust, later variants increasing to 50N. Its size quickly defined the standard in small engine class, and several manufacturers developed engines of similar size, increasing the power in every new model, currently within the market, this diameter engine covers a range of thrusts, 45N, 50N, 55N, and 70N.
The X95, as all Xicoy engines, push the limit well beyond our competitors, raising the power to 95N, almost 3 times the power of the original MW44 and with the added benefit of lower overall weight.
The X95 is of the same size of previous X90 and X85 engines, using all new internal parts like rotor, stator and combustion chamber.
Thanks to the FlexThrust technology, the X95 can be used in all aeromodels designed for the MW44 and similar engines of 45N to much bigger models needing up to 95N, greatly improving the choices when looking for your next plane! As with all Xicoy Engines our purpose designed X95 electronics offers an industry leading simple, lightweight installation. One of The biggest hurdles in Turbine Design is Specific Fuel Consumption (SPFC), the X95 has the lowest TSFC.
The engine is offered in Compact or Light versions.
Specifications PRELIMINARY
Thrust: Continuously adjustable from 45 to 95N (9,7kgf, 21,4 Lbf)
Size: 76mm diameter, 183mm long
Weight: 706g (1,56lb) engine only, 888g (1,96lb) total installed weight except battery
Rpm Range: 48,000 ... 175.000 RPM
Idle Thrust: 3.8N (0,4kg/0,85Lbf)
Fuel: Kerosene + 4% oil. Diesel allowed but not reccomended. Fuels containing Biodiesel not allowed.
Fuel consumption: 260g/minute (330ml/m) at 95N
Starter motor: High speed brush-less
Fuel pump: Digitally controlled brush-less pump
Telemetry: Jeti/Futaba/MPX/Core/Hott/FrSky/Spektrum and Bluetooth Android and IOS (optional modules)
Service interval: 25 hours
Reccomended battery: 2s Lipo/2200mAh reccomended. (3s Life compatible, not recommended). Battery not included
Other: Built in sensors for ambient temperature and atmospheric pressure to automatically adjust the engine performance

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
  Turbinas->
    Queroseno->
      Accesorios
      Aceite
      Humo
      Recambio JETCENTRAL
      Turbinas Jet Central
      Turbinas Jetsmunt
      Turbinas KingTech
      Turbinas PBS
      Turbinas XICOY
    Eléctrica->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

SAVAGE Max Red 1080 mm
129.90EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Servo NARO Max Std
1 x	Bateria arranque incl. compresor inflado
1 x	e-Looger V3
1 x	Conector banana oro 0,8 mm
1 x	Conector DEANS (T)
1 x	Bancada servo gancho
1 x	Conector banana oro 5,5 mm antichispa
1 x	Conector banana oro 8,0 mm
1 x	Conector banana oro 8,0 mm 5 pcs (hembra)
1 x	Conector 5,0 mm EC5 hembra con funda (2 pcs)
1 x	Gancho de remolque + 4,5 m
1 x	Conector BEC hembra (10 pcs)
1 x	Conector Centralita Optotronix Aurora
1 x	Conector banana oro 6,0 mm Ultralight (pareja)
1 x	Conector equilibrado XH (2S) hembra (2 pcs)
1 x	Conector 5,0 mm EC5 macho con funda (2 pcs)
1 x	Conector banana oro 5,5 mm
1 x	Gancho de remolque hasta 4,5 m
1 x	Conector DEANS hembra 30 cm
1 x	Conector banana oro 2,5 mm (pareja)
1 x	Pegatinas números para marcar
1 x	ARAMID panel nido de abeja 1300x2600x2 mm
1 x	Fibra carbono "MANGA" 12k 170 mm x 5 m
1 x	Cinta autoadhesiva 13 mm x 16.80m; Diente 1.0 mm
1 x	Cinta alerones 1m x 10mm
1 x	Cinta carbono TeXtreme 38 g/m2 IM UD 20mm x 100 m
2 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Soporte para bridas hasta 3 mm (0,12") para tornillo M3 (10 pcs)
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x	Sistema cierre 300 mm con abrazadera (2 pcs)
1 x	Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 22 rollos
1 x	Sistema cierre baterías 20x200 mm
1 x	Cinta fibra de vidrio 225g / m² (Silane, liso) 30 mm, 100m
1 x	Cinta autoadhesiva 26 mm x 16.80m; Diente 1.0 mm
1 x	Sistema cierre 320 mm largo (5 pcs)
1 x	Bridas 1,66x71 / 0,07x2,8"mm (20 pcs)
1 x	Cinta SURFACE 21mm x 5m
1 x	Soporte para bridas de hasta 3 mm (10 pcs)
2 x	Cinta fibra carbono 50 mm 3k 200 g/m2 x 10m
1 x	Bisagra larga con pin metalico (6 uds)
2 x	Bisagra de nylon flaps 33x9 (2 pcs)
1 x	Bisagra larga con pin metalico (12 uds)
1 x	Bisagra 15 mm reforzada
1 x	Bisagra de compuerta/Flaps
1 x	Bisagra 18 mm reforzada
2 x	Bisagra pequeña con pin metalico (12 uds)
1 x	Bisagra 25 mm reforzada
2 x	Bisagra Micro flexible (12 uds)
1 x	Bisagra de compuerta 30x16 mm (2 pcs)
2 x	Bisagra cilíndrica 48 mm Ø 2,5 mm (5 pcs)
2 x	Bisagra de aluminio tipo PIN 6x98 mm (2 pcs)
1 x	Bisagra Cabina Discus 2c, 2a, Ventus 2cx (2 pcs)
1 x	Bisagra cilíndrica 4,5 Ø x 12 x 67 mm (10 pcs)
2 x	Bisagra de aluminio tipo PIN 4,5x70 mm desmontable (2 pcs)
1 x	Bisagra de aluminio tipo PIN 4,5x70 mm kit (2 pcs)
1 x	Bisagra cilíndrica 2,5 Ø x 8 x 33 mm (10 pcs)
2 x	Bisagra cilíndrica 2,5 Ø x 10 x 43 mm (10 pcs)
1 x	Bisagra de aluminio desmontada 6x98 mm (2 pcs)
1 x	Bisagra de nylon flaps/compuertas 27x10,5 (2 pcs)
3 x	Bisagra correa de latón en miniatura 1m
1 x	Bisagra de Flaps 33x9 mm (6 uds)
1 x	Adaptador USB para elementos Jeti DUPLEX
2 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	APM2,6 Power module con BEC 5,3 V DC
1 x	Cable carga emisora GRAUPNER
1 x	Adaptador 2 LiPos XH>EH
1 x	Cable carga bateria transmisor Multiplex 2x0,5 qmm (50 cm)
1 x	BEC Mini JETI
1 x	Cable carga bateria transmisor Futaba 2x0,5 qmm (50 cm)
1 x	Adaptador TP/TopFuel - XH 2/3S
1 x	Adaptador MPX-Dean "T"
1 x	Alambre de cobre esmaltado en rojo Ø0,2 mm (5 m)
1 x	Cable "Y" equilibrador 7S, 2x JST-XH / 1x JST-EH
1 x	CC 03
1 x	Alambre de cobre esmaltado Ø0,2 mm (5 m)
1 x	Cable BEC 30 cm (macho)
1 x	Cable de entrenamiento para GWS T4A II (maestro-alumno)
1 x	Cable BEC 30 cm (hembra)
1 x	Cable "Y" carga 4 mm (2 IN-1 OUT)
1 x	Adaptador MPX-XT60 10cm
1 x	Rótula 6 mm con bola M3 (10 pcs)
1 x	Banda lijado g. 180 para BSL 220/E (5 pcs)
1 x	Piloto 1/12 "Langley"
1 x	Cono 102 mm aluminio
1 x	Cono INO de 102 mm (Imitacion carbono)
1 x	Piloto 1/12 "Fighter"
1 x	Brazo servo de carbono 25 mm
1 x	Piloto 1/12 "Cougar"
1 x	Gancho de remolcador
1 x	Bisagra papel CA (12 uds)
2 x	Bisagra de nylon 20x15x0,3 (10 pcs)
1 x	Pletina MPX 4 pines (5 uds)
1 x	Gancho de lanzamiento regulable
1 x	Film perforado 145 cm / 50 m
1 x	Film perforado 100 cm / 10 m
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (10 pcs)
1 x	Fibra carbono tela 245g/m2 127 cm x 10m
1 x	AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (10 pcs)
1 x	Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl
1 x	Film perforado 100 cm / 50 m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Plancha aluminio 500x250x0.5 mm
1 x	Plancha fibra vidrio 350x150x0.5 mm
1 x	Conector ala MPX 8 pines con conector M/H
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 10m
1 x	Plancha fibra vidrio 620x540x2,0 mm
1 x	Fibra de vidrio 80 g/m² (3 m x 100 cm)
1 x	Plancha fibra vidrio 350x150x2.0 mm
1 x	Fibra vidrio 163 g/m² 130cmx5m (Interglas 92105, aero, finish FK
1 x	Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p
1 x	AIREX® M060 lámina (amarilla) 1200x550x4,0 mm (5 pcs)
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 50m
1 x	Film perforado 100 cm / 20 m
1 x	Fibra vidrio 163 g/m² 130cmx10m (Interglas 92105, aero, finish
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Fibra carbono tela 160g/m2 100 cm x 3 m
1 x	Bisagra Pequeña flexible (12 uds)
1 x	Bisagra pequeña con pin metalico (6 uds)
2 x	Bisagra pin 39x20 mm (10 uds)
1 x	ALPHA 1000mm BL ARTR
1 x	Rueda FEMA 127 mm / 6 mm
1 x	Rueda de cola 18 mm
1 x	Rueda centro aluminio 2,5" (1 pcs)
1 x	Rueda 127x43 centro aluminio Ø6.0 mm
1 x	Rueda 130 mm con electrofreno + E-Brake(2 uds)
1 x	Rueda FEMA 70 mm / 5 mm
1 x	Rueda FEMA 178 mm / 8 mm
1 x	Bisagra de aluminio tipo PIN 3,0x50 mm (2 pcs)
1 x	Bisagra de aluminio tipo PIN 4,5x70 mm (2 pcs)
1 x	Bisagra de nylon 20x20x0,3 (10 pcs)
1 x	Bisagra Larga flexible (12 uds)
1 x	Bisagra PIN 4.7 mm (5 pcs)
2 x	Bisagra Redonda flexible (12 uds)
1 x	Bisagra de Flaps (6 uds)
2 x	Bisagra cilíndrica 33 mm Ø 2 mm (5 pcs)
1 x	USB cable ALTIS
1 x	Adaptador JST-XH
1 x	Set bisagras indoor con horns integrados
1 x	Bisagra pin 26x11 mm (10 uds)
1 x	Interruptor corto On/Off micro
1 x	Switch electronico SXH HV
1 x	SBEC 30 D
1 x	T-shape holder metal LAMA
1 x	Bisagra cilíndrica 67 mm Ø 4,5 mm (5 pcs)
1 x	Bisagra de compuerta negra 30x16 mm (2 pcs)
1 x	Cable simulador USB multiplayer
1 x	Colador protector turbina 94 x 34 mm
1 x	Batería Sanyo Eneloop AAA 1,2 V 800 mAh
1 x	Liston de BALSA 8,0x8,0x1000 mm
1 x	Plancha de balsa 1,0x100x1000 mm
1 x	Autoarranque DLE 85/111/120 (motor incluido)
1 x	Liston de BALSA 10 x 10 x 1000 mm
1 x	Fuente alimentacion NT 25 Amp.
1 x	Colador protector turbina 94 x 32 mm
1 x	Pendulo "Special" depositos 60g
1 x	Pipa Jet A-10 Skymaster (set 2 pcs)
1 x	Colador protector turbina 73 x 32 mm
1 x	Anemometro Xplorer3
1 x	Liston de BALSA Borde ataque 8 x 10 x 1000 mm
2 x	Aro pasacable Ø20 mm (4 pcs)
1 x	AC-10 pre-rotacion + motor
1 x	Aceite para Bomba Vacio (1 litro)
1 x	Alicate para hacer "Z"
1 x	Alicate para "Ball-Link"
1 x	Soporte Guia Antena doble
1 x	Bayoneta de carbono cuadrada 5x5x220 mm
1 x	Base para servo
1 x	Listón de BALSA 5,0x5,0x1000 mm
1 x	Liston de BALSA 6,0x6,0x1000 mm
1 x	Plancha de balsa 2,0x100x1000 mm
1 x	Anclaje cabina de soporte horizontal "tipo F3A" (2 pcs)
1 x	Fundas alas/cola ODYSSEY
2 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Fundas de Luxe completas ODYSSEY
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Plancha de balsa 4,0x100x1000 mm
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Bisagra cilíndrica 43 mm Ø 2,5 mm (5 pcs)
1 x	Plancha de balsa 3,0x100x1000 mm
1 x	Listón de BALSA 4,0x4,0x1000 mm
1 x	Plancha de balsa 2,5x100x1000 mm
1 x	Medidor angulos y/o incidencias
1 x	Barra pegamento caliente Rojo
1 x	Listón de BALSA 2,0x2,0x1000 mm
1 x	Plancha de balsa 8,0x100x1000 mm
1 x	Listón de BALSA 3,0x3,0x1000 mm
1 x	Barra pegamento caliente Negro
1 x	Acumulador polvo para limpieza moldes
1 x	Batería Panasonic Eneloop AA 1,2 V 1900 mAh
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm

6,852.75EUR