2 x | VIPER 1.7 Electric break wheels + structure |
2 x | VIPER JET G2 Esq. 2 Red/White/Silver |
1 x | VIPER JET G2 Esq. 5 Green/White/Blue |
3 x | VIPER JET G2 Esq. 3 Orange/Black |
1 x | Blades 330mm |
1 x | CC 02 |
1 x | Solvent Plasti Dip 1000 ml |
1 x | Cable coupler M2,5 (2 pcs) |
2 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | CC 05 |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | Cable coupler M2x66 (2 uds) |
2 x | SE Ring 330 mm (4 pcs) |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Angled clevis with threaded rod M3 |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
2 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Blind nut M5 (4 pcs) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
2 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Blind nut M6 (4 pcs) |
1 x | SE Ring 480 mm (2 pcs) |
1 x | BEC 3A FOXY |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Rubber profile 6-2 mm 2M |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
2 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Round Rod 2,0x1000 mm |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
2 x | 20x1000 mm Ring Strap Back To Back |
2 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Round Rod 1,0x1000 mm |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | 10 mm floating pad (72 pcs) |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | 5 LiPo XH>EH adapter |
1 x | Round Rod 2,5x1000 mm |
3 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | Spray EC Red 400ml |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Straightened threaded rod M3 - 1m |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | METEOR 1.000 mm kit |
1 x | Wheel FEMA 165 mm / 8 mm |
1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Baseplate servo |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Oils Pumps Empty (1 liter) |
1 x | BLUE Colored Liquid smoke for turbine 0.75 l |
1 x | Bomba KP500V Kingtech |
1 x | Turbina KINGTECH K65 G4+ |
1 x | 2.5 inch aluminium core wheel (1 pcs) |
1 x | Wheel Ø 90 mm (1 ud) Electron Retracts |
1 x | Wheel FEMA 112 mm / 6 mm |
1 x | Wheel FEMA 127 mm / 6 mm |
1 x | Foam wheel Ø 38 mm (2 pcs) |
1 x | Super Light Wheels(Sponge Tyre) Ø 55mm x 19mm (2pcs) axis Ø 3.5m |
1 x | DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS |
1 x | Wheel FEMA 100 mm / 6 mm |
2 x | 152x46 Ø6.0 mm aluminium core wheel |
2 x | Wheel FEMA 82 mm / 5 mm |
1 x | 69x25 mm (2.75") axle Ø4 mm aluminium core wheel |
1 x | 76x23 Ø3.5 mm aluminium core wheel |
1 x | Super Light Wheels(Sponge Tyre) Ø 65mm x 19mm (2pcs) axis Ø 3.5m |
1 x | Wheel 22 mm |
1 x | Wheel FEMA 178 mm / 8 mm |
1 x | Wheel FEMA 152 mm / 8 mm |
2 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | 70x23 Ø3.5 mm aluminium core wheel |
1 x | Super Light Wheels (Sponge Tyre) Ø 60mm x 19 mm (2pcs) axis Ø 3. |
1 x | 60x25 mm tail wheel "type F3A" |
1 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
1 x | Wheel 38 mm V2 |
1 x | 102x26 Ø6.0 mm aluminium core wheel |
1 x | Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds) |
1 x | DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS |
1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
1 x | Wheel FEMA 140 mm / 6 mm |
1 x | Digital precision scale up to 2000 g |
1 x | Hot Glue Stick GREEN |
1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
1 x | Ball Link Plier |
1 x | Dust collector for mould cleaning |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Hot Glue Stick BLACK |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
1 x | AC-10 pre-rotacion with motor |
1 x | Xplorer1 anemometro |
1 x | Battery LiFe -3000/25C-3S 9.9V |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
1 x | Blue aluminium servo arm V3-Hitec 1,25inch M3 |
2 x | KingTech K100TP G4+ Turboprop |
1 x | Turbina KINGTECH K180 G4+ |
1 x | Filter KingTech |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | Frontal support Speed 280 |
1 x | Cooler motor type 280 |
1 x | GSU Kingtech |
1 x | Cooler motor type 150 |
1 x | Battery LiFe -3800/25C-3S 9.9V |
1 x | Clamp K30 G3 |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | KingTech Turbineoil 5L |
1 x | Turbina KINGTECH K55G4 |
1 x | KingTech Turbineoil 10L |
1 x | Turbine KINGTECH K85 G4 |
1 x | Kerostarter K30G |
1 x | Central support Speed 280 |
1 x | Frontal support Speed 400/480 |
1 x | Ø 28 mm fiberglass motor-holder for electric motors |
1 x | Scale exhaust K100TP |
1 x | Ø 40 mm fiberglass motor-holder for electric motors |
1 x | Motor mount for 1200 mm models |
1 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | A60 Motor Mount Alu complete set |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
1 x | Propeller APC 10x3,8 SF |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Propeller APC 11x8.5 Electric |
1 x | Propeller APC 11x5.5 Electric Pusher |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
1 x | Switching module high voltage SXH |
1 x | Short Switch On/Off micro |
1 x | 65 mm mini servo cover |
2 x | PSC 5 |
1 x | Opto Gas Engine Kill Switch |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Kwik link with arm M3xM2xL24 |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | KAVAN Hand crank fuel pump |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Metal clevis M3 (10 uds) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Angle measurer |
1 x | BOEING 727, Electric brake 28mm + controller |
1 x | BOEING 727, Jet pipe for Boeing 727 |
1 x | 5 mm Prop Adapter M6 |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | Stick coupler Ms 15 mm |
2 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | Propeller APC 10x5 Electric Pusher |
1 x | SE Ring 240 mm (2 pcs) |
1 x | Propeller APC 11x4.7 SF |
1 x | Tape GFK 50 mm |
1 x | PT 21x13 EL Propeller 3 Blade |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Cinta Goldfix 1m |
1 x | Propeller APC 10x5.5 MR Electric multirrotor |
1 x | Socket Head Screw M2x10 |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Propeller APC 10x4.7 SF Pusher |
1 x | Socket Screw M3x9 mm |
1 x | SE Ring 350 mm (2 pcs) |
1 x | Screw M2.5x20 (10 pcs) |
1 x | Aero-Master Wings (Aero-naut) |
1 x | Pan Head Screw M1,6x6 (10 pcs) |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Foil for sticking flaps and ailerons |
1 x | 5 mm Prop Adapter M8 |
1 x | Screw M4x20 (10 pcs) |
1 x | PT 16x10 E Propeller |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Threaded insert M3 (4 pcs) |
1 x | Servo inverter |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
2 x | Carbon fiber rod 1.5 mm x 1000 mm |
2 x | Screw M4x30 (10 pcs) |
1 x | Propeller APC 12x6 Electric Pusher |
1 x | Tirpiz Battleship 1:200 |
1 x | Propeller APC 13x4 Electric |
1 x | Screw M2.5x8 (10 pcs) |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | Profile ABS half cane 4x2.5x1000 mm |
2 x | Socket Head Screw M2x8 |
1 x | Propeller APC 10x7 SF |
1 x | Marker ties (20 pcs) |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | Screw M4x12 (10 pcs) |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | |
1 x | Propeller APC 12x10 Electric |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
2 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Propeller APC 14x12 Electric |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Screw M3x16 (10 pcs) |
1 x | HITEC DPC-11 programmer |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | La Capitania di Venetia accesories |
2 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | SPS 70V 100/200 A |
1 x | Switc electronic 30 Amp |
1 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
1 x | Multi-adapter balancer JST/C - TP |
1 x | SPARK Switch 5.9v |
1 x | Propeller MEJZLIK 20x10 Electric light (36 g) |
1 x | Multi-adapter balancer JST - TP |
1 x | MAX BEC 2D plus EX |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
1 x | Electronic switch JETI SP06 Opto |
2 x | MPS Gas-Cap-Powerswitch |
1 x | 58 mm micro servo cover |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
1 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
1 x | Ciano KAVAN Thin 20g |
1 x | Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter |
1 x | Adaptadores carga 6s JST-XH |
1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
1 x | Round Rod 1.0x3.5 cm |
1 x | VIPER 1.7 Tailpipe + Fuel Tank 1500ml |
1 x | Glow starter with charger 230v |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Metal clevis M2,5 (10 uds) |
1 x | Engine mounts for .09 - .19 engine |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Pin to cable coupler M1,6 ⌀ (6 pcs) |
1 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Pull-Pull complet set with CF rudder double servo arm |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | L-39 Albatros 1:4.75, Electric retract landing gear |
1 x | Ion Pro, Canopy (JP Model) |
1 x | EDF Ducted Fan JP Hobby 105mm + 12s Motor 875KV (CW) |
1 x | Surface Indicator Gauge Small |
1 x | Angle of incidence meter |
1 x | Brake controller for 28 and 36 mm Brakes |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Field folding model stand |
1 x | Field folding model stand SebArt |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Propeller balancer |
1 x | Medidor ángulos y/o incidencias |
1 x | BOEING 727 kit |
1 x | Jeti Black cap |
1 x | Propeller balancer |
1 x | Combustible Glow "KAVAN" air/heli 5% nitro |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Hovercraft sailcloth |
1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
1 x | Fuel bottle 500 ccm |
1 x | F-4 Phantom Scale 1:7, Electric retract landing gear |
1 x | HAWKER HUNTER 1:5,8, Electric retract landing gear |
1 x | Lipo FOXY G3 4500 mAh 11.1v 40/80C |
1 x | Servo TT ACE SHV 1504 MG |
1 x | 80x40 mm hard foam KOVO wheel |
1 x | 200 mm extensión servo HITEC/JR |
1 x | 1/4 Pilot "Mike" |
2 x | 101x28 mm (4.0") Type jets aluminium core wheel |
2 x | 1/12 Pilot "Langley" |
2 x | 280 cc gasoline fuel tank complet |
1 x | DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC) |
1 x | 1/12 Pilot "Fighter" |
1 x | 1/12 Pilot "Cougar" |
1 x | Cabel "Y" 15 cm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Carbon blade 230 mm |
1 x | Black "FUEL VENT" round aluminum overflow socket |
1 x | Wheel ø180 mm AIRTOP Ballon pneumatic |
1 x | 63x12 mm foam special light KOVO wheel with radius (2 pcs) |
2 x | 18m Fitting barb |
2 x | 115x29 mm (4.50") Type jets aluminium core wheel |
1 x | 64x20 mm (2.5") Type jets aluminium core wheel |
2 x | 1/6 Pilot "John" |
2 x | 1/6 Pilot "Buddy" |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
1 x | 1/10 Pilot "Jimmy" |
1 x | 10 mm gas motor standoff |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Lipo RAY 2200 mAh 2s 7.4v 30C |
1 x | Wheel FEMA 90 mm / 6 mm |
1 x | Wheels 270mm (2 pcs) |
1 x | Superlight wheel 100 mm with valve (2 pcs) |
2 x | 110x55 mm C SLH KOVO wheel |
1 x | |
1 x | 1/7 Pilot "Japanese" |
1 x | 89x25 mm (3.50") Type jets aluminium core wheel |
2 x | 20 mm carbon horn |
2 x | 1/6 Pilot "Garry" |
1 x | "Taxi Tank" Fuel Tank |
1 x | 120x60 mm C SLH KOVO wheel |
2 x | 102 mm aluminium spinner |
2 x | 160 mm carbon undercarriage (2pcs) |
1 x | 110x55 mm SLH KOVO wheel |
1 x | 100x50 mm SLH KOVO wheel |
2 x | 1/6 Pilot "Cindy" |
1 x | 90x45 mm hard foam KOVO wheel |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | 1/12 Pilot "Tom" |
1 x | 20x200 mm battery rings |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | 1000 cc gasoline fuel tank complet |
1 x | 1/10 Pilot "Jack" |
1 x | 102 mm INO spinner (carbon imitation) |
1 x | 1/6 Pilot "Tony" |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Black "FUEL VENT" round aluminum overflow socket |
1 x | Carbon plate 350x150x0.5 mm |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | 25 mm carbon servo arm |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | 22m Fitting barb |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Cable video GoPro |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Blind nut M8 (10 pcs) |
|
44,061.15EUR |