430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
      Futaba
      Graupner
      Jeti
      Jeti Accesories
      Multiplex
      Multiplex Accesorios
      PowerBox CORE
      RCM Pelikan
      Secraft
      Spektrum
      FrySky
    Receivers->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Copier 5x20 cm pcs
2 x Lipo RAY 2200 mAh 2s 7.4v 30C
1 x Strip 2,5x1,25x330 mm
1 x 22 mm Cut Disc Proxxon/Dremmel
2 x Battery LiPo GEN2700 mAh 3S 11.1v Transmitter Pack (Gens Ace)
1 x ABS I Strip 10x5x1000 mm
2 x LiPo Storage Box Type "BIG"
2 x Long ball link M2 (6 uds)
2 x Fresa corte diamante Ø 2.3mm (bola)
1 x Short ball link M2 (6 uds)
1 x Long ball link M1.6 (6 uds)
1 x Battery LiPo GENS 450 mAh 2S 7.4V 25C (Gens Ace)
1 x Support conector MPX (6 pcs)
1 x Battery LiPo GENS 5000 mAh 12S 44.4v 45C (Gens Ace)
1 x Fabric scissors curved (offset handles), 16 cm / 6" length
1 x Aramid fibre shears Proton®, 21 cm / 8" length
2 x M2,5 5Diam metal ball link V3 (2 pcs)
2 x Battery LiPo GENS 2200 mAh 4S 14.8v 25C (Gens Ace)
2 x Dust collector for mould cleaning
1 x Ball Link Plier
1 x Initior Receiver FRX2 Wireless
1 x ABS Strip 1.0x2.0x1000 mm
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x Socket head ball link M3 (2 uds)
1 x Smoke set "M"
1 x Battery RX JETI LiIon RB 6200 7.2v
1 x Soporte filtro FESTO (4 pcs)
1 x Lipo SMART 5000 mAh 4s 14.8v IC5
1 x Smoke set "S"
1 x Tapa estado carga XT-60 (6 pcs)
1 x Ferrita 27x14x7 mm
2 x Battery LiPo GENS 450 mAh 3S 11.1V 25C (Gens Ace)
1 x Battery E-Flite 150 mAh 1S 3,7V 45C for WHIPIT
1 x Parachute expulsion foam
1 x Short ball link M3 (6 uds)
1 x Initior Transmitter FTX2 Wireless
1 x Aluminium battery holder red
1 x Round Rod 1,25x1000 mm
2 x ABS I Strip 20x10x1000 mm
1 x Soporte grifo FESTO vertical (1 pcs)
1 x White smoke bombs AX-9 (10 pcs)
1 x Red smoke canister 65 g
1 x Round Rod 5,0x1000 mm
1 x M3 Maxi ball link (2 uds)
1 x Boxed KIT OF 7 Rotary Burrs FINE
1 x Support XT60 conector (2 pcs)
2 x M2,5 Diam metal ball link V3 (2 pcs)
1 x Red smoke canister 140 g
1 x Fresa corte diamante Ø 2.35mm (lentil)
1 x Battery bed V2_M (black)
1 x Blue metalic ball link M3/3 azul (2 pcs)
2 x M3 Maxi ball link (2 uds)
2 x ABS Strip 1.5x8.0x1000 mm
2 x LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Battery LiPo GENS 5000 mAh 4S 14.8v 45C (Gens Ace)
2 x Battery RX JETI LiIon RB 3100 7.2v
2 x Stickers-digit for marking
1 x Strip 1,5x1,5x330 mm
1 x Battery LiPo GENS 4400 mAh 7S 25.9v 35C (Gens Ace)
1 x Propeller balancer
1 x Ferrita 14x8x5.5 mm
1 x "M" set
1 x Green smoke canister 100 g
1 x Suncover 100cc Red
1 x 55% silver electrodes (2 pcs)
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Battery LiPo GENS 5300 mAh 2S 7.4V 30C (Gens Ace)
1 x Digital weight, angle and balance meter BASIC
1 x Dean-T Plug Mold
1 x M2,5 5Diam black ball link V2 (2 pcs)
1 x Red smoke bombs AX-60 (5 pcs)
2 x Joint with bearing M3 22x5,5
1 x Cut tube
1 x Angle support XT60 conector
1 x Strip ABS 2.0x5.0x1000 mm
1 x Strip 2,0x2,0x330 mm
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x Connector Sub-D 2+5 Male
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Blind nut M5 (4 pcs)
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Connector CAN 15
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x XH female balance (3S) connector (2 pcs)
1 x Oracover CARBON Metalic 1 m
1 x 105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Connectors banna oro 3 mm (M/F)
1 x Pine wood slat 6.0x6.0x1000 mm
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Battery LiPo GENS 4000 mAh 6S 22.2v 45C (Gens Ace)
1 x 6,4x1000 mm 2:1 black termoretract tube
1 x BALSA triangular 10x10x1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
1 x TopFuel LiPo 25C-ECO-X 1800mAh 3S
1 x 58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x L-Connector 4.0 mm x 1000 mm
1 x Battery LiPo GENS 5500 mAh 2S 7.6V 120C (Gens Ace Hard Case)
1 x Beech dowels 3.0 x 1000 mm
1 x Connectors banna oro 2 mm (M/F)
1 x LiPo TopFuel Power-X 4000 mAh 2s 35C MTAG
1 x Blind nut M6 (4 pcs)
1 x Screws set for Hitec MG arms servo
2 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Gear set HITEC HS-81
1 x Blue aluminium double servo arm V3-Hitec 3,5inch
1 x Servo HITEC HS-325 BB
1 x Servo KST DS125MG servo ala 10mm 28g 7Kg
1 x Servo KST MS825 V8.0 35kg 8.4v
1 x Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm
1 x Servoholder Dymond DS 1800 MG Digital (2 pcs)
1 x PS-050 TONEGAWA Servo
1 x Soporte servo KST X08/H and Plus
1 x Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x Servo HITEC D951 TW
1 x Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
1 x SSPS105 Super Hi-Power servo
1 x Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x Soporte servo KST X10 mini / DS135MG
1 x Gear for MICRO BB
1 x Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x Gear for D 54
1 x Gear for D 200 BX
1 x Servo KST BLS915 HV V8.0 25Kg 20mm 78g
1 x Servo Dymond D 37 Eco
1 x Servo KST X15-1208 V8.0 13.5Kg HV
1 x Servo KST X10-710 V8.0 7.5Kg HV
1 x Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
1 x Foil for sticking flaps and ailerons
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Marker ties (20 pcs)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 450 mm (2 pcs)
1 x PPM Encoder Module
1 x SE Ring HACKER 300 mm (2 pcs)
1 x SE Ring 330 mm (4 pcs)
1 x Ring 320 mm length (5 pcs)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Dremel 3000 130W
1 x Digital scale up to 40 kg
1 x Crimping tool
1 x M3/5Diam metal ball link V3 (2 pcs)
1 x Short ball link M1.6 (6 uds)
1 x Lipo GENS 2700 mAh 3s 11.1v 30C "Soaring "
1 x Battery LiPo GENS 5000 mAh 3S 11.1v 45C (Gens Ace)
1 x Battery LiPo TATTU 450 mAh 2S 7,4V 75C
1 x Esc KOSMIK 160+ HV COOL
1 x DUPLEX 2,4EX Stick with 2-Position Switch for Transmitter DC/DS
1 x DUPLEX 2.4EX Satellite receiver Rsat 2
1 x Motor Scorpion HKIII 4035-560 Kv
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x PVC yellow transparent battery termo-retract 68 mm (1 m)
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Squared carbon wing joinner 5x5x220 mm
1 x Digital precision scale up to 2000 g
1 x Crimping tool
1 x Fresa corte diamante Ø 1.0mm (bola)
1 x SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x SLICK 360-A 104" (2640 mm)
1 x Spare round blades, 28 mm, pack/ 2 pcs.
1 x Propeller Pleg CAM Carbon 13x5
1 x silverlot 45% - 1,50x500 mm solder rods (2 pcs)
1 x Propeller diller for EME35 and DLE35
1 x Propeller Pleg CAM Carbon 10x6
1 x Screwdriver for Hexagon 1,5mm
1 x Propeller Pleg CAM Carbon 12.5x9
1 x Bird (Aero-naut)
1 x Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x Tool for entel
1 x SE Ring 240 mm (2 pcs)
1 x Strip 3,5x1,75x330 mm
1 x Strip ABS 2.0x3.0x1000 mm
1 x GM Propellers Folding propeller Scale 20x13 Carbon white 1 pair
1 x Battery LiPo TATTU 1550 mAh 3S 11,1V 75C
1 x Lipo GENS G-Tech 5100 mAh 6s 22.2v 80c
1 x Battery LiPo GENS 4000 mAh 2S 7,4v RX (Gens Ace)
1 x Battery LiPo TATTU 12000 mAh 4S 14,8V 15C
1 x Battery LiPo TATTU 450 mAh 3S 11,1V 75C
1 x Black smoke bombs AX-60 (5 pcs)
1 x EVP Unit for AXI2208/xx and 2212/xx
1 x Battery LiPo GENS 120 mAh 2S 7.4V 30C (Gens Ace) F3P Pack
1 x ESC KOLIBRI 140 HV-I
1 x KOBY 40 LV Esc
1 x DUPLEX 2.4EX Central Box 220
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x DUPLEX 2.4EX Expander E2
1 x DUPLEX 2.4 EX MBar
1 x Oracover Brown 2 m
12,713.94EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies