Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Receptor DUPLEX REX 7 Slim 2.4EX
114.90EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Bird (Aero-naut)
1 x	TWIST planeador gomas
1 x	Varilla ABS 3,0x1000 mm
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	Conector banana oro 3 mm
1 x	Plancha contrachapado Abedul 600x300x6,0 mm
1 x	Termo-retráctil rojo tubo de 3,2x1000 mm 2:1
1 x	Conector banana oro 2 mm
1 x	Acople ALU M2,5 Ø 3 (2 uds)
1 x	Paracaidas XTRALITE S
1 x	USBCOM 5i
1 x	Horn aluminio negro LH largo L31xH30 (2pcs)
1 x	Bisagra cilíndrica 48 mm Ø 2,5 mm (5 pcs)
1 x	Terminales de mando o arriostrado aluminio rojo M3, 4 mm (4 pcs)
1 x	Funda anticalorica de fibra de vidrio Ø 4 mm 1000 mm
1 x	Termo-retráctil verde tubo de 12,7x1000 mm 2:1
1 x	Listón de BALSA 2,0x2,0x1000 mm
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Prisionero aluminio 3 mm Ø (4 uds)
1 x	Set de Humo "M"
1 x	Interface Jack Adapter IKARUS
1 x	Soporte conector XT-60 (2 pcs)
1 x	Soporte conector MPX enrasado (6 pcs)
1 x	Varilla ABS 6,0x1000 mm
1 x	Soporte WingFix ULTRA BE
1 x	Liston ABS 1,5x8,0x1000 mm
1 x	Cable silicona 0,25 mm2 verde (100 m)
1 x	Cartuchos de humo AX-60 blanco (5 pcs)
1 x	Fibra carbono tela No-cruzada ST 100g/m2 50 cm x 10 m
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Salida para cables 41x5,5 mm (2 pcs)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Liston de BALSA 8,0x8,0x1000 mm
1 x	Soporte para cables L 10 mm (6 pcs)
1 x	Conector 2 mm macho (2 pcs) con conector de seguridad
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Acoplador de aluminio para tubo de carbono 6/M4
1 x	Horn de mando 5/10 con rótula M2
1 x	Pasacable de goma Ø 4 mm (4 uds)
1 x	Horn aluminio pequeño rojo (2pcs)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Conjunto bieleta 100 mm para dirección
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Listón de BALSA 5,0x5,0x1000 mm
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Termo-retráctil negro tubo de 3,2x1000 mm 2:1
1 x	Plancha de balsa 1,5x100x1000 mm
1 x	Liston ABS 2.0x10.0x1000 mm
1 x	Bisagra cilíndrica 4,5 Ø x 12 x 76 mm (10 pcs)
2 x	Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x	Funda anticalorica de fibra de vidrio Ø 6 mm 1000 mm
1 x	Bisagra larga con pin metalico (12 uds)
1 x	Cierre cabina tipo FOX MDM1 4m (1 par)
1 x	Ball link aluminio M3 V1 azul (10 pcs)
1 x	Conector banana oro 3,5 mm
1 x	Plancha contrachapado Abedul 1520x750x4,0 mm
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	Horn aluminio anodiazado 6 mm rojo con rótula
3 x	Plancha ABS 500 x 400 x 0,5 mm (blanca)
1 x	Bancada servo gancho
1 x	Cartuchos de humo AX-60 mezclados (5 pcs)
1 x	Equilibrador hélices
1 x	PVC termo-retráctil batería 68 mm transparente (1 m)
1 x	Hélice Electric Carbon 6x5
1 x	Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thread
1 x	Funda anticalorica de fibra de vidrio Ø 8 mm 1000 mm
1 x	Prolong. Hembra XH 30 cm para 4 elem. cables silicona 0,25 mm2
1 x	Soporte grifo FESTO (2 pcs)
1 x	OS 37 SZ-H, Biela
1 x	Prolong. Macho XH 30 cm para 4 elem. cables silicona 0,25 mm2
1 x	Set bisagras indoor con horns integrados
1 x	Adaptador de hélice 3,2 mm M5
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Hélice Electric Carbon 10x8
1 x	Hélice Electric Carbon 6.5x4
1 x	Hélice Electric Carbon 8.5x6
1 x	AXI 2204 Multicopter
1 x	Hélice POWER-PROP 14x12
1 x	Helice APC 11x6 Glow/Gas
1 x	Hélice Electric Carbon 8.5x7
1 x	Hélice Electric Carbon 10.5x8
1 x	Hélice POWER-PROP 14x9
1 x	Cable servo PVC 0,14 mm2 FUTABA (5 m)
1 x	Motor OS MAX 65 AX (incl. silenciador)
1 x	Adaptador de hélice 3 mm M5 (largo)
1 x	Motor OS 105 HZ-R Heli
1 x	Motor OS MAX 120 AX
1 x	Prolong. Hembra XH 30 cm para 5 elem. cables silicona 0,25 mm2
2 x	Prisionero aluminio 6 mm Ø (4 uds)
2 x	Bisagra 25 mm reforzada
2 x	AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs)
2 x	Bisagra de aluminio desmontada 6x98 mm (2 pcs)
2 x	Ball link latón BS M3 V1 (10 pcs)
2 x	Conector equilibrado XH (5S) macho (2 pcs)
2 x	Ball link M2 (10 pcs)
4 x	Cuña desmoldeo roja (5 pcs) [40x20mm]
2 x	Bisagra de aluminio tipo PIN 3,0x50 mm (2 pcs)
1 x	Plancha fibra vidrio 350x150x1.5 mm
2 x	Prisionero 2 mm Ø (4 uds)
2 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
2 x	Soporte carbono MR30 (2 pcs)
2 x	Protector punta ala 38x10x12 (2 pcs)
2 x	Prisionero allen M3x5
2 x	Transmision funda/varilla octog. plastica 3/2
2 x	ARAMID panel nido de abeja 1300x2600x2 mm
2 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 10m
2 x	Conexión alas 2 servos JR/Graupner 50 cm
2 x	Bisagra Pequeña flexible (12 uds)
2 x	Fibra de vidrio 25 g (2 m²)
1 x	Conexion PREMIUM fuselaje/alas para 3 servos SUB-D 160 cm
1 x	Varilla mando roscada M2,5 (2 uds)
1 x	Conexion PREMIUM MAXI fuselaje/alas para 3 servos SUB-D 200 cm
1 x	Cable silicona 0,25 mm² negro (25 m)
1 x	Cable servo JR silicona 0,35 mm2 / 5m
1 x	Bisagra PIN mediana (12 uds)
1 x	Soporte para cables S 6 mm (10 pcs)
1 x	Motor OS 46 AX II
1 x	Cable servos PVC 0,14 mm2 Graupner (100 m)
1 x	Cable servo PREMIUM 50m (blanco/rojo/azul)
1 x	Cable silicona 0,25 mm2 blanco (150 m)
1 x	Cable servo PVC 0,14 mm2 Hitec/Mpx (5 m)
1 x	Cable servos PVC 0,35 mm2 Graupner (100 m)
1 x	Soporte bomba Xicoy X45
1 x	Cable servos silicona 0,50 mm2 Futaba (100 m)
1 x	Prolong. XH / XH 30 cm para 6 elem. cables silicona 0,25 mm2
1 x	Adaptador de hélice 2,3 mm M4 (Günther)
1 x	Prisionero aluminio 3.5 mm Ø (4 uds)
1 x	Plancha ABS 500 x 400 x 1,5 mm (blanco)
1 x	Crimping sleeves para cables de 1.1 mm (10 pcs)
1 x	Prisionero aluminio 2.5 mm Ø (4 uds)
1 x	Plancha ABS 500 x 400 x 2,0 mm (blanco)
1 x	Bisagra cilíndrica 2,5 Ø x 10 x 43 mm (10 pcs)
1 x	Conector ala MPX 8 pines con conector M/H
1 x	Bisagra Cabina Discus 2c, 2a, Ventus 2cx (2 pcs)

5,288.62EUR