800.00EUR

Motor DLE 120 cc
[ROIDLE120]


Twin-cylinder power and efficiency

The DLE-120 delivers 50 pounds of static thrust—more than enough power for intense 3D maneuvers. Twin opposed cylinders reduce vibration and engine wear and increase performance.

Mufflers, standoffs and electronic ignition boost performance even further. The DLE-120 delivers the most punch at the lowest weight and the lowest price of any engine in its class. Pick up the DLE-120 and fly with performance-fueled confidence.

Features:
•Efficient, light design for a high power-to-weight ratio
•Light pistons for fast acceleration, excellent compression and low vibration
•CNC-machined parts for high performance and long life
•Sealed crankshaft bearings
•Improved piston and cylinder contact area for increased engine lifespan.
•Matched mufflers included for optimized power
•Two mufflers
•Electronic ignition module with spark plugs
•Standoffs
•Spiral wire wrap

Specifications:
Displacement: 120.0 cc (7.3 cu in)
Bore: 1.85 in (47 mm)
Stroke: 1.38 in (35 mm)
Total Weight: 6.13 lb (2781 g)
Output: 12 hp @ 7,500 rpm
Includes: Electronic ignition module, muffler, spark plug, standoffs, spiral wire wrap, connector safety clips.
Requires: unleaded gasoline, 2-cycle oil, ignition battery & propeller
Suggested Propellers: 26 x 10, 26 x 12, 27 x 10, 28 x 10

DLE-120 Technical Data:
Ignition Battery: 4.8-8.4 NiCd or NiMH, 6.6V LiFe or 2S LiPo pack
Gas/Oil Mix: 30:1
Replacement Spark Plug: DLEG1326
Static Thrust: 20.9 lb (9.5 kg) @ 328 feet altitude, 18.7 lb (8.5 kg) @ 1,800 feet altitude
Weight Breakdown: Engine: 5.08 lb (2306 g), Muffler 1: 3.6 oz (103 g), Muffler 2: 3.9 oz (111 g), Ignition Module: 5.3 oz (149 g); Miscellaneous: 4 oz (112 g)


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Hovercraft sailcloth
1 x 
1 x Servo NARO Max Std
1 x Gracia (Top Model)
1 x Propeller hub EME 60cc
1 x Flat version carb bend for the ZG 62
1 x Aluminium Motor Mount ZG23SL/H/M and ZG26SC/SCM, ZG231SLH
1 x Gearwheel 9724/09 for ZG 45
1 x Motor DA 170
1 x Gasket carb - intake manifold for ZG 74B/ZG 80G
1 x 180° TUBE-ANGLE Ø 25 mm
1 x Moki Pushrod S250 (1 pcs)
1 x Carburator Moki S250
1 x CILINDER FOR DLE 55RA
1 x Muffler DLE-120 Left
1 x Piston ring for DLE-30
1 x Carburator Moki S 180
1 x Carburator gasket MOKI
1 x Motor NGH GF30
1 x WingFix ULTRA Black Edition
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x Starter EM Gear Power 250
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x Starter EM Gear Power 80
1 x Starter Sullivan-STAR 603 DINATRON
1 x Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x APM2.6 Power module with 5.3V DC BEC
1 x Hexagonal ball head 2.0 x 50 mm
1 x Sanyo Eneloop AA 1,2 V 2400 mAh battery
1 x Bungee HLG Premium
1 x BEC 3A FOXY
1 x Propeller balancer
1 x CC 05
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x Profile ABS Square 4 x 1000 mm
1 x Horn 20x28,5 mm (2 pcs)
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Brass control horn M4 short for wire (10pcs)
1 x L-Connector 1.5 mm x 1000 mm
1 x Xplorer2 anemometro
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Horn 6/20 with M3 Bearing
1 x Horn 6/35 with M3 Bearing
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Battery bed V2_S (black)
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x Profile ABS half cane 3x1000 mm
1 x Horn 13,5x16 mm (2 pcs)
1 x METEOR 1.000 mm kit
1 x Xplorer3 anemometro
1 x ABS angle 6,0x6,0x1000 mm
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x M3 black washers (4 pcs)
1 x 6 mm aluminium horn with patella
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x Spring lock washer 3.1 mm (20 pcs)
1 x Profile ABS half cane 2.5x1000 mm
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Quicklock washer 4 mm (10 pcs)
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Flat washer 2.7 mm (20 uds)pcs)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x LiPo Storage Box Standard 1 Type 1
1 x Quicklock washer 3.5 mm (10 pcs)
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x M3-M4 rubber washer (8 pcs)
1 x RH long aluminium horn (2pcs)
1 x Battery E-Flite 150 mAh 1S 3,7V 45C for WHIPIT
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Stickers-digit for marking
1 x Aluminium battery holder red
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x LH long aluminium horn L31xH30 (2pcs)
1 x USB Mini Camera endoscope
1 x Quicklock washer 1 mm (10 pcs)
1 x 800TVL CMOS camera for FPV
1 x Cross Connector 4.0 mm x 1000 mm
1 x Profile ABS half cane 2.0x1000 mm
1 x Horn 6/27 with M3 Bearing
1 x Small aluminium horn gold (2pcs)
1 x EDGE 540 V3 (Superlite) ORANGE
1 x BETA 1400 RTF Red
1 x Aro pasacable Ø25 mm (4 pcs)
1 x Baseplate servo
1 x Starter 12v (Max 90 and 15ccm)
1 x Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Ball link Aluminio M3 (2 pcs)
1 x Starter 12v (Max 180 and 30ccm)
1 x Digital precision scale up to 2000 g
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Xplorer4 anemometro
1 x Piston ring for DLE-20 RA
1 x Piston ring for DLE-20
1 x DLE 111 pipe plug
1 x Reed valve petal for DLE 111
1 x DLE 85 / DLE111 / DLE120 Prop Washer
1 x 
1 x Hardener Aero EPH 161 (250 g)
1 x OS 37 SZ-H, Carburetor Wharf OS 40, 60, FS70, 91S and 120SE
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Hub propeller DLE 111 V3/120
1 x Sensor Ignition DLE 20/20RA/30/35RA/55/55RA
1 x GASKET SET FOR DLE40
1 x Piston DLE 30 - DLE 60
1 x Gasket set DLE-20
1 x Motor support DLE 30 (1 pcs)
1 x Ball bearing 6003 DLE
1 x Gasket set DLE-30
1 x DLE 85/111/120 Crankshaft keyway
1 x Ball bearing 6203 DLE
1 x Needle bearing DLE55-RA
1 x Reed valve petal for DLE 170M
1 x Kit repair carburator DLE-170
6,430.57EUR
Manufacturers
Manufacturer Info
DLE Engines
Other products
Languages
Español English
Currencies