1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 5 line servos wire black (1 m)
1 x Protective Cover for wires Ø 15 mm 1000 mm
1 x Green silicone 0,25 mm² wire (25 m)
1 x Silicone 0,35 qmm servos cable Futaba (5 m)
1 x 1 m servo "Premium" wire (white/red/blue)
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x JR silicone servo wire 0,35 qmm / 5m
2 x Green silicone 0,25 qmm wire (50 m)
1 x PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x Silicon black 2,5 qmm cable ( 25 m)
1 x Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x Protective open Cover for wires Ø 13 mm 1000 mm
2 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Silicone 0,25 qmm servos wire Graupner (100 m)
1 x PVC 0,08 qmm Futaba servos wire (5 m)
1 x PVC 0,08 qmm Graupner servos wire (5 m)
1 x Silicon red 1,0 qmm cable ( 25 m)
1 x PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x Cable set PREMIUM, fuselage/wing
1 x Protective Cover for wires Ø 20 mm 1000 mm
1 x 6 mm Quick clamp_S (10 pcs)
1 x Extractor piñones 2.3/3.2 mm
2 x Big Crow DLE-170M
1 x Motor DLE 200cc Std
1 x Motor DLE 200cc Premium Muffler
1 x AX-60 starters (5 pcs)
1 x AX-60 starters (5 pcs)
1 x Yellow smoke canister 140 g
1 x Initior Receiver FRX2 Wireless
1 x Parachutist
1 x Red smoke bombs AX-60 (5 pcs)
1 x Blue smoke canister 140 g
1 x Black smoke bombs AX-60 (5 pcs)
1 x White smoke bombs AX-3 (10 pcs)
1 x Red smoke canister 140 g
1 x B4-0 rocket charges (6 pcs)
1 x PCARD Wireless System
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Steering arm 16 mm Ø 4 mm
2 x Canopy Lock V1 M3 Blue (2 pcs)
2 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Screw-lock connector M2 (2 uds)
1 x Steering arm 12 mm Ø 4 mm
1 x Steering arm 16 mm Ø 3 mm
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
2 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
2 x Ball link duraluminium M3 V1 (10 pcs)
2 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
2 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Z type of cable coupler Ø 1.8 (2 uds)
3 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Z type of cable coupler Ø 1 (2 uds)
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Ball link V1 Ø7 M4/3 (6 uds)
2 x Threaded coupler ALU M2 Ø 4 (2 uds)
2 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Aluminium red ball links M3 V1 (10 pcs)
2 x Threaded coupler M2 (10 uds)
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Ball link Aluminio M3 (2 pcs)
2 x Kwik link AL M3 con Clip (2 pcs)
1 x Z type of cable coupler Ø 2 (2 uds)
2 x Couple M4 for wire (10 pcs)
1 x Aramid 50 daN 50 m
1 x MAX pilot ARTF
2 x Windsock Ozone L - 700 mm
2 x Wing OXY 5,0 m2
1 x Parachute PV6 for F3J
2 x Opale Rucksack
1 x LUCAS pilot ARTF
1 x Para-RC Mix
3 x Windsock Ozone L -1200 mm
1 x Parachute P4
1 x Oracover Azul 2 m
1 x Crimping tool
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x 3 LiPo XH>EH adapter
1 x Black silicone 1,0 qmm wire (50 m)
1 x ABS tube 5.0x4.0x1000 mm
1 x Banna gold connector 2,5 mm (M/F)
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Cable Cargador FUTABA
2 x 10 mm Quick clamp_L (6 pcs)
1 x EDF Stream-Fan 110mm kv780
1 x DUPLEX 2.4EX RC Switch
1 x Screwdriver for Hexagon 1,27mm
2 x Small Crow DLE-170M
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Ply-Span 450x600/13g Yellow
1 x Truck-trailer for gliders 720 x 239 mm
2 x 35 mm gas motor standoff
1 x BULLIT Wing 1095 mm
1 x Cockpit metalic closing
1 x Pulley brass 10/2 (2 pcs)
1 x Round Rod 1.0x3.5 cm
1 x 41x5,5 mm wires output (2 pcs)
1 x Tip wing protector 40x14 (2 pcs)
1 x Brass ball links BS M3 V1 (10 pcs)
2 x 28x5 mm wires output (2 pcs)
1 x SUS wire 3m (nylon coated)
2 x 140 mm rods set for direction control
1 x Allen wheel collar M4x4
2 x Cierre cabina aluminio Ø5, I=16 mm
1 x Pushrod octagone 4/3
1 x Ø 0,5 mm Pull-Pull Kevlar Line (3 m)
1 x Locking cable tie 2.5x100 (uds)
1 x FOAM - CURE™ (24g)
2 x UHU Por 50ml/40g
1 x Softshell Hispano Aviación
1 x Horn 6/20 with M3 Bearing
1 x 6 mm blue aluminium threaded horn with patella
1 x Small aluminium horn gold (2pcs)
1 x Cable coupler M2 (10 uds)
1 x Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left
1 x Cable coupler M2 (10 uds)
1 x Black large kwik link (10 pcs)
2 x Cabin latch Fox MDM1 4m (pair)
1 x Kwik link with arm M5xM2,5xL30
1 x Pushrod greyline 3/2 with coupler M3 L: 1000 mm
1 x Tip wing protector 30x10 (2 pcs)
1 x Pushrod greyline 4/3 with coupler M3
1 x Metal clevis M2,5 (10 uds)
1 x Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x Landing gear frontal support 29x26x13,5
1 x Allen wheel collar M4x6
2 x 38x4,5 mm wires output (2 pcs)
1 x Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x Porta Kwik link M3 3 mm (2 pcs)
1 x Micro clevis (10 uds)
1 x Cable grommet Ø 6.4 mm (4 uds)
1 x Allen wheel collar M3x3
1 x 80 mm rods set for direction control
1 x Canopy Lock V1 M3 Red (2 pcs)
2 x Threaded coupler M3 (10 uds)
1 x Wire easy tensioner (silver)
1 x Turnbuckle M3 33x49 (2pcs)
1 x Turnbuckle M1,6x20/30 (2pcs)
1 x BRASS CONTROL HORN M3x16 mm 2pcs
1 x Pulley brass 2,5/1 (2 pcs)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Pulley brass 6/1,5 (2 pcs)
1 x Set clevis for pull-pull (TY13233 & TY13234)
2 x Ballast 700gr OPALE
1 x Paramotor Trike XL
1 x Rescue 1,8m2 / BackPack
2 x Aluminium ignition bad (blue)
2 x Wing OXY 0,5 pulgadas2
2 x 15 mm floating pad (30 pcs)
2 x Aluminium wide washer M4 Black (4 pcs)
1 x Cooler motor type 400
1 x VAGABOND 1500 mm ARF V2 (Blue)
1 x Reductora IPS 150 DX2BB-FXCS 11,8:1
1 x Foam wheel Ø 351 mm (2 pcs)
1 x Propeller 3x2
1 x Propeller 3x3
1 x Propeller 9x7 SlowFlyer
1 x A50 Backmountset complete
2 x Connectors MPX male
1 x A50 Backmountset complete V3/V4
1 x DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS
1 x A50 Backmountset complete
1 x SE Ring 240 mm (2 pcs)
1 x Horn 6/35 with M3 Bearing
1 x Horn 20x28,5 mm (2 pcs)
2 x Aluminun wheel collar 2 mm Ø (4 uds)
2 x Cable grommet Ø 4 mm (4 uds)
1 x Wheel collar 2 mm Ø (4 uds)
1 x Wheel collar 5 mm Ø (4 uds)
2 x Walnut wood slat 1.5x1.5x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x BALSA trip 6.0x6.0x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x BALSA triangular 6x6x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Split pin 1x8 mm (10 uds)
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x Snap long M2 (10 uds)
1 x Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x Blades 330mm
1 x Parachute expulsion foam
1 x White smoke bombs AX-9 (10 pcs)
1 x Ventral support for AX-18/AX-60
1 x Me-163
1 x Clip fixing for wing (2 pcs)
1 x Tip wing protector 28x10x12 (2 pcs)
2 x Wheel collar 3 mm Ø (4 uds)
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x UHU hart 35 g
1 x Cap Hispano Aviación
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x White smoke canister 100 g
1 x BALSA trip 2.0x2.0x1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x BALSA trip 10x10x1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x Beech dowels 3.0 x 1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 6.0x6.0x1000 mm
1 x Wheel collar 3.5 mm Ø (4 uds)
1 x Pushrod greyline 3/2 with coupler M2
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Cockpit aluminium closing
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Canopy Latch
1 x Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs)
2 x Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
2 x Rubber bushing with bracket "B" type (2 pcs)
2 x Aluminium cap bolt washer M3 blue (8 pcs)
2 x 20 mm gas motor standoff
1 x Thread locker IC-Loc™ green "wicking" 10 ml
1 x Cyano INSTA - CURE+™ (56g)
1 x Epoxy QUIK-CURE™ 5 min (260g)
1 x Cyano INSTA - CURE™ Pocket (18g)
1 x LiPo TopFuel ECO-X 3800mAh 4s 35C MTAG
1 x Debonder CA 20g
1 x KAVAN CA Activator 150ml
1 x Set cintas unión paracaídas 145 cm
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Parachute BACKUP X100
1 x Rubber bushing with bracket "A" type (2 pcs)
1 x M3-M4 rubber washer (8 pcs)
1 x 20x1000 mm Ring Strap Back To Back
1 x Propeller APC 9x6 Glow/Gas
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Propeller APC 16x10 Glow/Gas
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x 50 mm gas motor standoff
1 x SE Ring HACKER 300 mm (2 pcs)
1 x 10 mm gas motor standoff
1 x Propeller APC 8x4 Glow/Gas
1 x Servo Bolt M3x6 (8 pcs)
1 x Fuel Fittings-Gold
1 x Fuel Fittings-Blue
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs)
1 x Propeller APC 11x5 Glow/Gas
1 x Aluminium wide washer M4 Red (4 pcs)
1 x aluminium servo arm V1-JR 1,0 inch M2
1 x Fuel Fittings-Red
1 x 11 mm Rubber pads (14 pcs)
13,148.55EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies