Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

16x8 BIELA propeller (3-blades) Pusher
68.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	20x200 mm battery rings
4 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x	Marker ties (20 pcs)
1 x	SE Ring 300 mm (2 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Ring 320 mm length (5 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Tape GFK 25 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 250 mm (2 pcs)
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cinta Goldfix 1m
1 x	SE Ring 350 mm (2 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 400 mm (2 pcs)
1 x	Optical RPM Sensor
1 x	XH male balance (5S) connector (2 pcs)
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	Conector BEC male (10 pcs)
1 x	XH female balance (5S) connector (2 pcs)
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Optotronix Aurora Plug
1 x	Connectors banna oro 3 mm (M/F)
2 x	Connectors banna oro 3,5 mm (M/F)
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Connectors banna oro 2 mm (M/F)
1 x	Conector Servo female 4 pines
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Connectors banna oro 4 mm (M/F)
1 x	MPX Sub-D Adaptor
1 x	Conector BEC female (10 pcs)
1 x	XH female balance (4S) connector (2 pcs)
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Xplorer3 anemometro
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Xplorer2 anemometro
1 x	Lock washer 2.2 mm (20 pcs)
1 x	1/10 Pilot "Jimmy"
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	ABS tube 4.0x2.0x1000 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	ORACOVER Fluor red (2 m)
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x
1 x	Adapters for 7.5 - 35cc aircraft and naval engines
1 x	Electric Fuel Pump 12v
1 x	DLA 116 crankshaft
2 x	Propadapter for motor A50
1 x	Gasket electric Fuel Pump
1 x	Propeller diller for DA50, DLE55 red
2 x	Propeller diller for EME35 and DLE35
1 x	XH female balance (3S) connector (2 pcs)
1 x	XH male balance (2S) connector (2 pcs)
1 x	XH male balance (3S) connector (2 pcs)
2 x	Softshell Hispano Aviación
1 x	6 mm M3 variable inclined horn
1 x	Brass control horn M2 long for wire (10pcs)
2 x	Soporte grifo FESTO vertical (1 pcs)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	CM-3
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Excentric gearbox BB for motor 600, 3,2mm axis (1,75:1)
1 x	Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x	DPSI Ampere battery backer
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Adapter lead MPX/XT60
2 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	Excentric gearbox for 2,3mm axis (4,1:1)
1 x	STD excentric gearbox for 2,0mm axis (5,0:1)
1 x	Excentric gearbox for 3,2mm axis (3,0:1)
1 x	STD excentric gearbox for 2,0mm axis (4,5:1)
1 x	Planetary gearbox(3,8:1)
1 x	Excentric gearbox for 2,0mm axis (5,0:1)
1 x	Planetary gearbox(3,8:1)
1 x	Excentric gearbox for 2,0mm axis (4,5:1)
1 x	Hose stopper 4 mm
1 x	T-Hose connector 2-2-2 mm
1 x	FESTO connector M7 Quick 6 mm
1 x	Electric Fuel Pump 12V
1 x	STD excentric gearbox for 2,0mm axis (3,75:1)
1 x	PH5 adapter for 5mm M8 axi for AXI2820 y 2826
1 x	AXI 2814/10 V2 Long
1 x	Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x	Racor 4/4 mm
1 x	Quick hose connector 6-6 mm
1 x	FESTO Blanking plug G1/8
1 x	Quick hose connector 4-3 mm
1 x	Variable Flow Smoke Pump System
1 x	FESTO connector M7 barb fitting 4mm
1 x	FESTO connector M7 Quick 6mm 90º
1 x	PowerBox Smokepump JETs 2x outside
1 x	Festo 6mm Tubing Holder (10 uds)
1 x	Electric Fuel pump
1 x	FESTO Filter 4 mm
1 x	Festo 4mm Tubing Holder (10 uds)
1 x	KAVAN Hand crank fuel pump
1 x	Motor OS FS 75 AX
1 x	Motor OS MAX 65 AX (incl. muffler)
1 x	Motor OS FS-62V 4T
1 x	OS GT15 W/E-4040 for airplane
1 x	OS 37 SZ-H, Crankshaft
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Recessed MPX connector support (6 pcs)
1 x	Propeller 9x7 SlowFlyer
1 x	AXI 2808/20 V2
1 x	AXI 2814/12 V2 Long
1 x	Adpater for mounting VMKG gearbox in 480 motor
1 x	VM 2020/20 rear
1 x	AXI 2808/16 V2
1 x	Frontal Adapter for AXI53xx
1 x	AXI 2820/10 V2
1 x	AXI 2826/12 V2
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	20,5x14,5 Falcon electric V2 (40 g)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Power supply NT 25 Amp.
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x
1 x	CA Glue fast 20g
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	Cap Hispano Aviación
1 x	Soporte filtro FESTO (4 pcs)
1 x	Support conector MPX (6 pcs)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Support ECU Xicoy X-45
1 x	Support Flush MPX Conector (6 pcs)
1 x	Support Pitot JETI
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Support XT60 conector (2 pcs)
1 x	Support FUEL DOT V3
1 x	BOEING 727, Electric brake 28mm + controller
1 x	BOEING 727, Jet pipe for Boeing 727
1 x	BOEING 727 kit
1 x	Brake controller for 28 and 36 mm Brakes
1 x	9x4.7 * 22x12 carbon propeller
1 x	Epoxy QUIK-CURE™ 5 min (260g)
1 x	Propeller 8x4,3 SlowFlyer
1 x	Cyano SUPER - GOLD™ Pocket (18g)
1 x	Propeller 8x4 Electric
1 x	Propeller 3x3
1 x	Cyano SUPER - GOLD™ THIN (12g)
1 x	Extender tip (6 pcs)
1 x	Xoar Electric Beechwood Prop 22x10
1 x	Catalyst INSTA - SET™ (60g)
1 x	Adapter lead MPX/EC3
1 x	30 cm BEC cable (female)
1 x	CC 01
1 x	Battery charging cable XT60
1 x	Dean "T" - Futaba Adapter
1 x	CC 02
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	JETImodel Addcap 1640
1 x	Female connector for 20 pines AWG
1 x	Electronic switch JETI SP6 0-15v/6A
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Extension 5 lipos JST/C - JST
1 x	Hacker X-Pro USB interface V2
1 x	Male Prolonger TP 4/5S
1 x	JETImodel SINGLE BEC
1 x	Extension 5 lipos JST/C
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	wing/fuselage connector for 16 pines AWG 20-24
1 x	Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	DPSI magnetic switch actuator (housing)
1 x	Male connector for 20 pines AWG
1 x	Extension 2/3 lipos JST/C
1 x	Extension 5 lipos JST - JST/C
1 x	Female connector JST SH 1.0mm with 10 cm wire

8,878.25EUR