119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 20x200 mm battery rings
4 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x Marker ties (20 pcs)
1 x SE Ring 300 mm (2 pcs)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x SE Ring HACKER 300 mm (2 pcs)
1 x Ring 320 mm length (5 pcs)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Tape GFK 25 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 250 mm (2 pcs)
2 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Cinta Goldfix 1m
1 x SE Ring 350 mm (2 pcs)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 400 mm (2 pcs)
1 x Optical RPM Sensor
1 x XH male balance (5S) connector (2 pcs)
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x Conector BEC male (10 pcs)
1 x XH female balance (5S) connector (2 pcs)
1 x Connectors banna gold 5,5 mm (M/F)
1 x Optotronix Aurora Plug
1 x Connectors banna oro 3 mm (M/F)
2 x Connectors banna oro 3,5 mm (M/F)
1 x 2 mm female connector (2 pcs) with safety connector
1 x Connectors banna oro 2 mm (M/F)
1 x Conector Servo female 4 pines
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Connectors banna oro 4 mm (M/F)
1 x MPX Sub-D Adaptor
1 x Conector BEC female (10 pcs)
1 x XH female balance (4S) connector (2 pcs)
1 x Connectors banna oro 8,0 mm (M/F)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x Xplorer3 anemometro
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Xplorer2 anemometro
1 x Lock washer 2.2 mm (20 pcs)
1 x 1/10 Pilot "Jimmy"
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x ABS tube 4.0x2.0x1000 mm
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x ORACOVER Fluor red (2 m)
1 x Strip ABS 2.0x5.0x1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x 
1 x Adapters for 7.5 - 35cc aircraft and naval engines
1 x Electric Fuel Pump 12v
1 x DLA 116 crankshaft
2 x Propadapter for motor A50
1 x Gasket electric Fuel Pump
1 x Propeller diller for DA50, DLE55 red
2 x Propeller diller for EME35 and DLE35
1 x XH female balance (3S) connector (2 pcs)
1 x XH male balance (2S) connector (2 pcs)
1 x XH male balance (3S) connector (2 pcs)
2 x Softshell Hispano Aviación
1 x 6 mm M3 variable inclined horn
1 x Brass control horn M2 long for wire (10pcs)
2 x Soporte grifo FESTO vertical (1 pcs)
1 x APM2.6 Power module with 5.3V DC BEC
1 x CM-3
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Excentric gearbox BB for motor 600, 3,2mm axis (1,75:1)
1 x Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x DPSI Ampere battery backer
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Adapter lead MPX/XT60
2 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x Excentric gearbox for 2,3mm axis (4,1:1)
1 x STD excentric gearbox for 2,0mm axis (5,0:1)
1 x Excentric gearbox for 3,2mm axis (3,0:1)
1 x STD excentric gearbox for 2,0mm axis (4,5:1)
1 x Planetary gearbox(3,8:1)
1 x Excentric gearbox for 2,0mm axis (5,0:1)
1 x Planetary gearbox(3,8:1)
1 x Excentric gearbox for 2,0mm axis (4,5:1)
1 x Hose stopper 4 mm
1 x T-Hose connector 2-2-2 mm
1 x FESTO connector M7 Quick 6 mm
1 x Electric Fuel Pump 12V
1 x STD excentric gearbox for 2,0mm axis (3,75:1)
1 x PH5 adapter for 5mm M8 axi for AXI2820 y 2826
1 x AXI 2814/10 V2 Long
1 x Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x Racor 4/4 mm
1 x Quick hose connector 6-6 mm
1 x FESTO Blanking plug G1/8
1 x Quick hose connector 4-3 mm
1 x Variable Flow Smoke Pump System
1 x FESTO connector M7 barb fitting 4mm
1 x FESTO connector M7 Quick 6mm 90º
1 x PowerBox Smokepump JETs 2x outside
1 x Festo 6mm Tubing Holder (10 uds)
1 x Electric Fuel pump
1 x FESTO Filter 4 mm
1 x Festo 4mm Tubing Holder (10 uds)
1 x KAVAN Hand crank fuel pump
1 x Motor OS FS 75 AX
1 x Motor OS MAX 65 AX (incl. muffler)
1 x Motor OS FS-62V 4T
1 x OS GT15 W/E-4040 for airplane
1 x OS 37 SZ-H, Crankshaft
1 x Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Recessed MPX connector support (6 pcs)
1 x Propeller 9x7 SlowFlyer
1 x AXI 2808/20 V2
1 x AXI 2814/12 V2 Long
1 x Adpater for mounting VMKG gearbox in 480 motor
1 x VM 2020/20 rear
1 x AXI 2808/16 V2
1 x Frontal Adapter for AXI53xx
1 x AXI 2820/10 V2
1 x AXI 2826/12 V2
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x 20,5x14,5 Falcon electric V2 (40 g)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Power supply NT 25 Amp.
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x 
1 x CA Glue fast 20g
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x 
1 x Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x Cap Hispano Aviación
1 x Soporte filtro FESTO (4 pcs)
1 x Support conector MPX (6 pcs)
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Support ECU Xicoy X-45
1 x Support Flush MPX Conector (6 pcs)
1 x Support Pitot JETI
1 x Aro pasacable Ø25 mm (4 pcs)
1 x Support XT60 conector (2 pcs)
1 x Support FUEL DOT V3
1 x BOEING 727, Electric brake 28mm + controller
1 x BOEING 727, Jet pipe for Boeing 727
1 x BOEING 727 kit
1 x Brake controller for 28 and 36 mm Brakes
1 x 9x4.7 * 22x12 carbon propeller
1 x Epoxy QUIK-CURE™ 5 min (260g)
1 x Propeller 8x4,3 SlowFlyer
1 x Cyano SUPER - GOLD™ Pocket (18g)
1 x Propeller 8x4 Electric
1 x Propeller 3x3
1 x Cyano SUPER - GOLD™ THIN (12g)
1 x Extender tip (6 pcs)
1 x Xoar Electric Beechwood Prop 22x10
1 x Catalyst INSTA - SET™ (60g)
1 x Adapter lead MPX/EC3
1 x 30 cm BEC cable (female)
1 x CC 01
1 x Battery charging cable XT60
1 x Dean "T" - Futaba Adapter
1 x CC 02
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x JETImodel Addcap 1640
1 x Female connector for 20 pines AWG
1 x Electronic switch JETI SP6 0-15v/6A
1 x Male/Female prolonguer for Balancer Thunder Power 6S
1 x Extension 5 lipos JST/C - JST
1 x Hacker X-Pro USB interface V2
1 x Male Prolonger TP 4/5S
1 x JETImodel SINGLE BEC
1 x Extension 5 lipos JST/C
1 x wing/fuselage connector for 12 pines AWG 20-24
1 x wing/fuselage connector for 16 pines AWG 20-24
1 x Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
8,818.52EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies